- 18 11月, 2009 4 次提交
-
-
由 Jassi Brar 提交于
Many SoCs have their I2S pins MUXed with other functions. So we need to pass a callback for driver to configure the pins appropriately. Hence, the need of platform data and this header. As and when needed new callbacks and structure pointers maybe added to this header. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NBen Dooks <ben-linux@fluff.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jassi Brar 提交于
Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jassi Brar 提交于
Making room for namespace for the PCM Controller driver the platform driver(s3c24xx-pcm) has been renamed to SoC agnostic name 's3c-dma'. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NBen Dooks <ben-linux@fluff.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jassi Brar 提交于
The s3c24xx_pcm prefix for the soc_platform is inappropriate when some Samsung SoCs have PCM controllers which will eventually have drivers and hence namespace ambiguities. To resolve naming ambiguities in future the following have been renamed in order 1) s3c24xx_pcm_dma_params -> s3c_dma_params 2) s3c24xx_pcm_preallocate_dma_buffer -> s3c_preallocate_dma_buffer 3) s3c24xx_pcm_dmamask -> s3c_dma_mask 4) s3c24xx_pcm_XXX -> s3c_dma_XXX Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NBen Dooks <ben-linux@fluff.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 11月, 2009 1 次提交
-
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Acked-by: NSteve Sakoman <steve@sakoman.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 13 11月, 2009 5 次提交
-
-
由 Mark Brown 提交于
The DAPM widgets are now insntantiated by the core when creating the card so there is no need for the individual CODEC drivers to do so. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Joonyoung Shim 提交于
The jack_status_check callback function is the interface to check the status of the jack. Some target provides the method to distinguish what is the jack inserted - headphone jack, microphone jack, tvout jack, etc, so we can implement it using the jack_status_check function. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Barry Song 提交于
While probing, AC97 codec drivers and soc-core generically execute the following sequence: snd_soc_new_ac97_codec -> snd_soc_new_pcms -> reset ac-link/read AC97 ID to detect ->... -> set platform_data to ac97 by soc-core commit 474828a4 adds platform_data to snd_ac97 instance. But ac97 platform data hasn't given to snd_ac97 before actual ac97 operations. Then while ac97_read access platform_data of snd_ac97 for detecting, NULL pointer oops will fire. That means old platform_data patch doesn't work in real-life cases. This patch moves the operation of setting ac97 platform_data earlier than ac97 reading/writing operations. Then it makes platform_data of AC97 become practically useful. Signed-off-by: NBarry Song <21cnbao@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jassi Brar 提交于
Corrected the order of 'source' and 'pll_id' arguments. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Many devices need to calculate the bit clock rate desired to work out the clock configuration required for the device. Provide utility functions to do this using both hw_params structures and raw numbers. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 10 11月, 2009 7 次提交
-
-
由 Grant Likely 提交于
The TX and RX irq handlers are identical. Merge them Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
APLL_CTL register is configured by the twl4030-codec MFD driver. Remove code, which makes changes in the APLL_CTL register, and replace those with checks against the configured audio_mclk configuration done in the MFD driver. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Peter Ujfalusi 提交于
Configure the APLL_INFREQ field in the APLL_CTL register based on the platform data. Provide also a function for childs to query the audio_mclk frequency. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
audio_mclk value is going to be handled by the twl4030-codec MFD driver, configure the correct value for boards, which is using the twl4030 audio. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Add audio_mclk to the platform data struct for the twl4030-codec MFD driver. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Graeme Gregory 提交于
This patch increases the number of supported audio channels from 4 to 16 and has been sponsored by Shotspotter Inc. It also fixes a FSYNC rate calculation bug when McBSP is FSYNC master. Signed-off-by: NGraeme Gregory <gg@slimlogic.co.uk> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk> Acked-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NJarkko Nikula <jhnikula@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 11月, 2009 1 次提交
-
-
由 Jarkko Nikula 提交于
Upcoming change to omap-mcbsp.c require that machine drivers using OMAP as a DAI master to pass sample rate generator input clock frequency to the omap-mcbsp.c DAI driver. Pandora is using 256*Fs output from the TWL4030 codec as an input clock to the McBSP sample rate generator. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Tested-by: NGrazvydas Ignotas <notasas@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 11月, 2009 6 次提交
-
-
由 Grant Likely 提交于
The MPC5200 AC97 driver is disabling the slots when a stop trigger is received, but not reenabling them if the stream is started again without processing the hw_params again. This patch fixes the problem by caching the slot enable bit settings calculated at hw_params time so that they can be reapplied every time the start trigger is received. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Grant Likely 提交于
Move the resolving of the psc_dma_stream pointer to a helper function to reduce duplicate code Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Grant Likely 提交于
Sound drivers PCM DMA is supposed to free-run until told to stop by the trigger callback. The current code tries to track appl_ptr, to avoid stale buffer data getting played out at the end of the data stream. Unfortunately it also results in race conditions which can cause the audio to stall. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Grant Likely 提交于
All DMA blocks are lined up to period boundaries, but the DMA handling code tracks bytes instead. This patch reworks the code to track the period index into the DMA buffer instead of the physical address pointer. Doing so makes the code simpler and easier to understand. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
Remove the dead code and labels "card_err" in the error paths of some codec drivers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 11月, 2009 3 次提交
-
-
由 Mark Brown 提交于
-
由 Jassi Brar 提交于
Added the missing clk_enable after acquiring the 'audio-bus' clock. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Janusz Krzysztofik 提交于
After DMA burst mode has been introduced in sound/soc/omap/omap-pcm.c, omap_pcm_prepare() unconditionally calls: omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); Current implementation of those two functions found in arch/arm/plat-ompa/dma.c doesn't support OMAP_DMA_DATA_BURST_16 on OMAP1 at all, so they both end with BUG() on that machine. That results in ASoC being completely unusable, at least on my OMAP5910 based Amstrad Delta. The patch corrects the problem by not calling those two functions when run on OMAP1 class based machines. Created against linux-2.6.32-rc5. Tested on Amstrad Delta. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NJarkko Nikula <jhnikula@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 11月, 2009 8 次提交
-
-
由 Mark Brown 提交于
snd_soc_init_card() is always called as the last part of the CODEC probe function so we can factor it out into the core card setup rather than have each CODEC replicate the code to do the initialiastation. This will be required to support multiple CODECs per card. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
A fairly hefty change in diff terms but no actual code changes, will be used by the next commit. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Linus Torvalds 提交于
-
git://github.com/at91linux/linux-2.6-at91由 Linus Torvalds 提交于
* 'for-linus' of git://github.com/at91linux/linux-2.6-at91: at91: at91sam9g45 family: identify several chip versions avr32: add two new at91 to cpu.h definition
-
由 Nicolas Ferre 提交于
cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds the capacity to differentiate Engineering Samples and final lots through the inclusion of at91_cpu_fully_identify() and the related chip IDs with chip version field preserved. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
由 Nicolas Ferre 提交于
Somme common drivers will need those at91 cpu_is_xxx() definitions. As at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch that adds those chips to cpu.h in AVR32 architecture. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits) MIPS: O32: Fix ppoll MIPS: Oprofile: Rename cpu_type from godson2 to loongson2 MIPS: Alchemy: Fix hang with high-frequency edge interrupts MIPS: TXx9: Fix spi-baseclk value MIPS: bcm63xx: Set the correct BCM3302 CPU name MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store MIPS: Avoid potential hazard on Context register MIPS: Octeon: Use lockless interrupt controller operations when possible. MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache MIPS: SMTC: Avoid queing multiple reschedule IPIs MIPS: GCMP: Avoid accessing registers when they are not present MIPS: GIC: Random fixes and enhancements. MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands MIPS: SPRAM: Clean up support code a little MIPS: 1004K: Enable SPRAM support. MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4 MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT. MIPS: MTI: Fix accesses to device registers on MIPS boards ...
-
- 03 11月, 2009 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Remove some debug messages producing too much noise PM: Fix warning on suspend errors PM / Hibernate: Add newline to load_image() fail path PM / Hibernate: Fix error handling in save_image() PM / Hibernate: Fix blkdev refleaks PM / yenta: Split resume into early and late parts (rev. 4)
-
由 Ian Campbell 提交于
nr_processes() returns the sum of the per cpu counter process_counts for all online CPUs. This counter is incremented for the current CPU on fork() and decremented for the current CPU on exit(). Since a process does not necessarily fork and exit on the same CPU the process_count for an individual CPU can be either positive or negative and effectively has no meaning in isolation. Therefore calculating the sum of process_counts over only the online CPUs omits the processes which were started or stopped on any CPU which has since been unplugged. Only the sum of process_counts across all possible CPUs has meaning. The only caller of nr_processes() is proc_root_getattr() which calculates the number of links to /proc as stat->nlink = proc_root.nlink + nr_processes(); You don't have to be all that unlucky for the nr_processes() to return a negative value leading to a negative number of links (or rather, an apparently enormous number of links). If this happens then you can get failures where things like "ls /proc" start to fail because they got an -EOVERFLOW from some stat() call. Example with some debugging inserted to show what goes on: # ps haux|wc -l nr_processes: CPU0: 90 nr_processes: CPU1: 1030 nr_processes: CPU2: -900 nr_processes: CPU3: -136 nr_processes: TOTAL: 84 proc_root_getattr. nlink 12 + nr_processes() 84 = 96 84 # echo 0 >/sys/devices/system/cpu/cpu1/online # ps haux|wc -l nr_processes: CPU0: 85 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -953 proc_root_getattr. nlink 12 + nr_processes() -953 = -941 75 # stat /proc/ nr_processes: CPU0: 84 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -954 proc_root_getattr. nlink 12 + nr_processes() -954 = -942 File: `/proc/' Size: 0 Blocks: 0 IO Block: 1024 directory Device: 3h/3d Inode: 1 Links: 4294966354 Access: (0555/dr-xr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2009-11-03 09:06:55.000000000 +0000 Modify: 2009-11-03 09:06:55.000000000 +0000 Change: 2009-11-03 09:06:55.000000000 +0000 I'm not 100% convinced that the per_cpu regions remain valid for offline CPUs, although my testing suggests that they do. If not then I think the correct solution would be to aggregate the process_count for a given CPU into a global base value in cpu_down(). This bug appears to pre-date the transition to git and it looks like it may even have been present in linux-2.6.0-test7-bk3 since it looks like the code Rusty patched in http://lwn.net/Articles/64773/ was already wrong. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio-keys - use IRQF_SHARED Input: winbond-cir - select LEDS_TRIGGERS Input: i8042 - try to get stable CTR value when initializing Input: atkbd - add a quirk for OQO 01+ multimedia keys
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux: ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c ARM: S3C2440: mini2440: Fix spare warnings ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test ARM: S3C: Fix adc function exports ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set ARM: S3C24XX: Introduce S3C2442B CPU ARM: S3C24XX: Define a macro to avoid compilation error ARM: S3C: Add info for supporting circular DMA buffers ARM: S3C64XX: Set rate of crystal mux ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c-mpc: Do not generate STOP after read. i2c: imx: disable clock when it's possible to save power. i2c: imx: only imx1 needs disable delay i2c: imx: check busy bit when START/STOP
-