- 13 11月, 2009 2 次提交
-
-
由 Christian Borntraeger 提交于
On s390 there are two ways of specifying the system call number for the svc instruction. The standard way is to use the immediate field in the instruction (or to use EXecute for values unknown during assemble time). This can encode 256 system calls. The kernel ABI also allows to put the system call number in r1 and then execute svc 0 to enable system call numbers > 255. It turns out that single stepping svc 0 is broken, since the PER program check handler uses r1. We have to use a different register. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
After an IPL from NSS the uptime of the system is incorrect. The reason is that the startup code in head.S is not executed in case of an IPL from NSS. Due to that sched_clock_base_cc which is used to initialze wall_to_monotonic contains the time stamp when the NSS has been created instead of the time stamp of the system start. Reinitialize the cputime accounting values in create_kernel_nss after the SAVESYS CP command that created the NSS segment. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 29 10月, 2009 3 次提交
-
-
由 Heiko Carstens 提交于
sigp sense only returns the status of a cpu if it is non zero. If the status of the sensed cpu is all zeros condition code 0 (accpeted) is set and no status bits are returned. The current code however assumes that a status was returned and tests bits in it. This means uninitalized data is accessed with random results. Worst case is that the code that checks if cpu is offline on cpu hotplug assumes that the target cpu is offline while it is still running. This leads potentially to memory corruption since resources that are still needed by the target cpu will be freed and could be resused while still in use. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
According to the architecture a cpu must not necessarily enter stopped state after completion of a sigp instruction with "stop" order code. So remove the BUG() statement after self sending sigp stop to avoid that it ever gets reached. Also add a sigp busy check to make sure that the order gets delivered. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Offlined cpus still have valid prefix register contents. Dumpers will store the register contents of a cpu to the location where its prefix register points to. For offlined cpus the area (lowcore) has been freed and the dumper would write the uninteresting contents of the offline cpu to a memory location which might be in use by some other component and destroy valueable information. To fix this set the prefix register of offline cpus to absolute address zero again. This prevents the current dumpers to write to random memory locations. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 10月, 2009 1 次提交
-
-
由 Andreas Krebbel 提交于
This patch makes the hwcap bit for the high gprs feature to be visible in /proc/cpuinfo. Signed-off-by: NAndreas Krebbel <Andreas.Krebbel@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 06 10月, 2009 8 次提交
-
-
由 Heiko Carstens 提交于
From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
We used address 0x1084 instead of 0x84 to store the suspend CPU address. With this patch we use the correct address 0x84 as it is defined in the POP. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The time a system has been suspended should not show up in any of the cputime accounting fields. The time of inactivity is definitly not any form of real cputime nor is it idle time. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
s390 version of f2053f1a "powerpc/perf_counter: Fix vdso detection". Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The function graph tracer used to have a protection against NMI while entering a function entry tracing. But this is useless now, the tracer is reentrant and the ring buffer supports NMI tracing. Same as 07868b08 for x86. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The system call takes a signed length parameter. So perform sign extension instead of zero extension. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
The s390 version of module_frob_arch_sections allocates additional syminfos for got and plt offsets. These syminfos are freed on sucessful module load. If the module fails to load (e.g. missing dependency when using insmod instead of modprobe) this area is not freed. This patch lets module_free free this area. Please note, we have to set the pointer to NULL since module_free is called several times from the generic code. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Also increase the maximum possible kmemleak early log entries since 2000 are not sufficient on s390. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 24 9月, 2009 3 次提交
-
-
由 Alexey Dobriyan 提交于
It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
* remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
We're weaning the core code off handing cpumask's around on-stack. This introduces arch_send_call_function_ipi_mask(). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 23 9月, 2009 9 次提交
-
-
由 Michael Holzheu 提交于
Currently, when the physical resume CPU is not equal to the physical suspend CPU, we swap the CPUs logically, by modifying the logical/physical CPU mapping. This has two major drawbacks: First the change is visible from user space (e.g. CPU sysfs files) and second it is hard to ensure that nowhere in the kernel the physical CPU ID is stored before suspend. To fix this, we now really swap the physical CPUs, if the resume CPU is not the pysical suspend CPU. We restart the suspend CPU and stop the resume CPU using SIGP restart and SIGP stop. If the suspend CPU is no longer available, we write a message and load a disabled wait PSW. Signed-off-by: NMichael Holzheu <michael.holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
pfn_is_nosave doesn't return the correct value for the second lowcore page if lowcore protection is enabled. Make sure it always returns the correct value. While at it simplify the whole thing. NSS special handling is done by the tprot check like it already works for DCSS as well. So remove the extra code for NSS. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Removes a couple of simple code duplications. But before I have to do this again, just simplify it. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
arch_ptrace on s390 implements PTRACE_(PEEK|POKE)(TEXT|DATA) instead of using using ptrace_request in kernel/ptrace.c. The only reason is the 31bit addressing mode, where we have to unmask the highest bit. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Force system into defined state after resume. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
On resume the system that loads the to be resumed image might have unstable pages. When the resume image is copied back and a write access happen to an unstable page this causes an exception and the system crashes. To fix this set all free pages to stable before copying the resumed image data. Also after everything has been restored set all free pages of the resumed system to unstable again. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
These functions aren't needed. Might be a leftover of the pre cond_syscall time. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Use function parameters instead of accessing the pt_regs structure to get the parameters. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Use function parameters instead of accessing the pt_regs structure to get the parameters. Also merge the 31 and 64 bit versions since they are identical. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 21 9月, 2009 3 次提交
-
-
由 Ingo Molnar 提交于
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: NStephane Eranian <eranian@google.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NPaul Mackerras <paulus@samba.org> Reviewed-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tim Abbott 提交于
This patch changes the remaining direct references to .data.page_aligned in C and assembly code to use the macros in include/linux/linkage.h. Signed-off-by: NTim Abbott <tabbott@ksplice.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTim Abbott <tabbott@ksplice.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 20 9月, 2009 2 次提交
-
-
由 Sam Ravnborg 提交于
ld-option is misnamed as it test options to gcc, not to ld. Renamed it to reflect this. Cc: Andi Kleen <andi@firstfloor.org> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/s390/kernel/sys_s390.c: linux/syscalls.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247068809.4382.111.camel@ht.satnam>
-
- 11 9月, 2009 9 次提交
-
-
由 Heiko Carstens 提交于
smp_cpu_not_running() and cpu_stopped() are doing the same. Remove one and also get rid of the last hard_smp_processor_id() leftover. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Saves us more than 65k pointless IPIs. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
"lockdep: Fix backtraces" reveales a bug in early setup code: when lockdep tries to save a stack backtrace before setup_arch has been called the lowcore pointer for the current thread info pointer isn't initialized yet. However our save stack backtrace code relies on it. If the pointer isn't initialized the saved backtrace will have zero entries. lockdep however relies (correctly) on the fact that that cannot happen. A write access to some random memory region is the result. Fix this by initializing the thread info pointer early. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Use a console_initcall() to initialize the s390 virtio console and clean up s390 console initialization in setup.c. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
If a named saved system (NSS) cannot be defined or saved, print out an error message with the return code of the underlying z/VM CP command. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Eleminate the local variable machine_flags and always change machine flags directly in the lowcore. This avoids confusion about when and why the two variables have to be synchronized. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Nelson Elhage 提交于
Note that this patch moves .data.init_task inside _edata. In addition, the alignment of .init.ramfs changes: It is now PAGE_ALIGNED and __initramfs_end is arbitrarily aligned; Previously it was only aligned to a 0x100-byte boundary, and always ended on an even byte. This change results in fewer output sections and in some data being reordered, but should have no functional effect. Signed-off-by: NNelson Elhage <nelhage@ksplice.com> Signed-off-by: NTim Abbott <tabbott@ksplice.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Tim Abbott 提交于
.data.page_aligned should not need a separate output section, so as part of this cleanup I moved into the .data output section in the linker scripts in order to eliminate unnecessary references to the section name. Remove the reference to .data.idt, since nothing is put into the .data.idt section on the s390 architecture. It looks like Cyrill Gorcunov posted a patch to remove the .data.idt code on s390 previously: <http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/2536.html> CCing him and the people who acked that patch in case there's a reason it wasn't applied. Signed-off-by: NTim Abbott <tabbott@ksplice.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
The sysc_restore_trace_psw and io_restore_trace_psw storage locations are created in the .text section. When creating and IPLing from a named saved system (NSS), writing to these locations causes a protection exception (because the .text section is mapped as shared read-only in the NSS). To permit write access, move the storage locations into the .data section. The problem occurs only when CONFIG_TRACE_IRQFLAGS is set. The git commmit that has introduced these variables is: 411788eaSigned-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-