- 22 3月, 2006 15 次提交
-
-
由 Michael Ellerman 提交于
Make mf_get_rtc(), mf_get_boot_rtc() and mf_set_rtc() static, cause they can be. We need to move mf_set_rtc() to avoid a forward declaration. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
These routines just call through to the mf routines, so point ppc_md straight at the mf routines. We need to pass the cmd through to mf_reboot to make it work, but that seems reasonable. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Some cleanups in the iSeries code. - Make mf_display_progress() check mf_initialized rather than the caller. - Set mf_initialized in mf_init() rather than in setup.c - Then move mf_initialized into mf.c, the only place it's used. - Move the mf related logic from iSeries_progress() to mf_display_progress() - Use a #define to size the pending_event_prealloc array - Use that define in the initialsation loop rather than sizeof jiggery pokery - Remove stupid comment(s) - Mark stuff static and/or __init Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
It has been decreed that platform numbers are evil, so as a step in that direction, replace platform_is_lpar() with a FW_FEATURE_LPAR bit. Currently FW_FEATURE_LPAR really means i/pSeries LPAR, in the future we might have to clean that up if we need to be more specific about what LPAR actually means. But that's another patch ... Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Remove redundant whitespace in include/asm-powerpc/cputable.h Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
When iommu_init_early_pSeries() was added, ages ago, we forgot to remove the code that checks /chosen/linux,iommu-off in pSeries_init_early(). We do it now in iommu_init_early_pSeries(). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
htab_bolt_mapping() takes a vstart and pstart parameter, but all but one of its callers actually pass it vstart and vstart. Luckily before it passes paddr (calculated from paddr) to the hpte_insert routines it calls virt_to_abs() (aka. __pa()) on the address, so there isn't actually a bug. map_io_page() however does pass pstart properly, so currently it's broken AFAICT because we're calling __pa(paddr) which will get us something very large. Presumably no one's calling map_io_page() in the right context. Anyway, change htab_bolt_mapping() callers to properly pass pstart, and then use it properly in htab_bolt_mapping(), ie. don't call __pa() on it again. Booted on p5 LPAR, iSeries and Power3. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
We can plug the boot cpu into its node independently of whether numa topology is detected. And numa_setup_cpu does the right thing for all cases now, so remove special-casing for non-numa from the cpu hotplug callback. Signed-off-by: NNathan Lynch <nathanl@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
The powerpc numa code unconditionally onlines all nodes from 0 to the highest node id found, regardless of whether cpus or memory are present in the nodes. This wastes 8K per node and complicates some cpu and memory hotplug situations, such as adding a resource that doesn't map to one of the nodes discovered at boot. Set nodes online as resources are scanned. Fall back to node 0 only when we're sure this isn't a NUMA machine. Instead of defaulting to node 0 for cases of hot-adding a resource which doesn't belong to any initialized node, assign it to the first online node. Signed-off-by: NNathan Lynch <nathanl@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
Code to handle Power4's invalid node id (0xffff) is duplicated for cpu and memory. Better to handle this case in one place -- of_node_to_nid. Overall behavior should be unchanged. Signed-off-by: NNathan Lynch <nathanl@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
Since we effectively treat the domain ids given to us by firmare as logical node ids, make this explicit (basically s/numa_domain/nid/). No functional changes, only variable and function names are modified. Signed-off-by: NNathan Lynch <nathanl@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
map_cpu_to_node does not need to be inline, it is never called in a hot path. map_cpu_to_node, numa_setup_cpu, and find_cpu_node can be marked __cpuinit, as they are never used after boot if CONFIG_HOTPLUG_CPU=n. Signed-off-by: NNathan Lynch <nathanl@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
Add debug statement for map_cpu_to_node; it's useful for cpu hotplug. Clarify debug statement about not finding the numa reference points property. Don't print a meaningless associativity depth (-1) on non-numa systems. Signed-off-by: NNathan Lynch <nathanl@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
At boot, the numa code is assigning boot_cpuid to node 0 unconditionally. Basically, numa_setup_cpu is being stupid about it, but this is the minimal fix -- just call numa_setup_cpu(boot_cpuid) later, after all nodes have been set online. Signed-off-by: NNathan Lynch <nathanl@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 21 3月, 2006 2 次提交
-
-
由 Kumar Gala 提交于
-
由 Kumar Gala 提交于
-
- 17 3月, 2006 10 次提交
-
-
由 Michael Ellerman 提交于
My patch (d7a5b2ff) to always panic if lmb_alloc() fails is broken because it checks alloc < 0, but should be checking alloc == 0. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
The spidernet drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Needed due to changes in ppc_sys.c. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Adrian Cox 提交于
While adding USB support to an MV64360 based board this week, I discovered that all MV64x60 boards in the kernel have platform_notify functions marked with __init. This causes an oops if a device is added after boot. The patch below removes the __init markers. I do not have all these boards to test on, but the change seems very unlikely to break anything else. Signed-off-by: NAdrian Cox <adrian@humboldt.co.uk> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Dump a stream of rawbytes with a new 'dr' command. Produces less output and it is simpler to feed the output to scripts. Also, dr has no dumpsize limits. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Christoph Hellwig 提交于
Typical use for of_find_node_by_name and of_find_node_by_type is to iterate over all nodes of a given type/name. Add a helper macro to do that (in spirit of the list_for_each* macros). Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Eric Sesterhenn 提交于
This converts arch/ppc to kzalloc usage. Crosscompile tested with allyesconfig. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
At present, the powerpc pmd_bad() and pud_bad() macros return false unless the given pmd or pud is zero. This patch makes these tests more thorough, checking if the given pmd or pud looks like a plausible pte page or pmd page pointer respectively. This can result in helpful error messages when messing with the pagetable code. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge: powerpc: update defconfigs [PATCH] powerpc: properly configure DDR/P5IOC children devs [PATCH] powerpc: remove duplicate EXPORT_SYMBOLS [PATCH] powerpc: RTC memory corruption [PATCH] powerpc: enable NAP only on cpus who support it to avoid memory corruption [PATCH] powerpc: Clarify wording for CRASH_DUMP Kconfig option [PATCH] powerpc/64: enable CONFIG_BLK_DEV_SL82C105 [PATCH] powerpc: correct cacheflush loop in zImage powerpc: Fix problem with time going backwards powerpc: Disallow lparcfg being a module
-
- 16 3月, 2006 13 次提交
-
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 John Rose 提交于
The dynamic add path for PCI Host Bridges can fail to configure children adapters under P5IOC controllers. It fails to properly fixup bus/device resources, and it fails to properly enable EEH. Both of these steps need to occur before any children devices are enabled in pci_bus_add_devices(). Signed-off-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
remove warnings when building a 64bit kernel. smp_call_function triggers also with 32bit kernel. WARNING: vmlinux: duplicate symbol 'smp_call_function' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:164:EXPORT_SYMBOL(smp_call_function); arch/powerpc/kernel/smp.c:300:EXPORT_SYMBOL(smp_call_function); WARNING: vmlinux: duplicate symbol 'ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:113:EXPORT_SYMBOL(ioremap); arch/powerpc/mm/pgtable_64.c:321:EXPORT_SYMBOL(ioremap); WARNING: vmlinux: duplicate symbol '__ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:117:EXPORT_SYMBOL(__ioremap); arch/powerpc/mm/pgtable_64.c:322:EXPORT_SYMBOL(__ioremap); WARNING: vmlinux: duplicate symbol 'iounmap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:118:EXPORT_SYMBOL(iounmap); arch/powerpc/mm/pgtable_64.c:323:EXPORT_SYMBOL(iounmap); Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Neuling 提交于
We should be memset'ing the data we are pointing to, not the pointer itself. This is in an error path so we probably don't hit it much. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This patch fixes incorrect setting of powersave_nap to 1 on all PowerMacs, potentially causing memory corruption on some models. This bug was introuced by me during the 32/64 bits merge. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The wording of the CRASH_DUMP Kconfig option is not very clear. It gives you a kernel that can be used _as_ the kdump kernel, not a kernel that can boot into a kdump kernel. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Enable the onboard IDE driver for p610, p615 and p630. They have the CD connected to this card. All other RS/6000 systems with this controller have no connectors and dont need this option. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Correct the loop for cacheflush. No idea where I copied the code from, but the original does not work correct. Maybe the flush is not needed. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
The recent changes to keep gettimeofday in sync with xtime had the side effect that it was occasionally possible for the time reported by gettimeofday to go back by a microsecond. There were two reasons: (1) when we recalculated the offsets used by gettimeofday every 2^31 timebase ticks, we lost an accumulated fractional microsecond, and (2) because the update is done some time after the notional start of jiffy, if ntp is slowing the clock, it is possible to see time go backwards when the timebase factor gets reduced. This fixes it by (a) slowing the gettimeofday clock by about 1us in 2^31 timebase ticks (a factor of less than 1 in 3.7 million), and (b) adjusting the timebase offsets in the rare case that the gettimeofday result could possibly go backwards (i.e. when ntp is slowing the clock and the timer interrupt is late). In this case the adjustment will reduce to zero eventually because of (a). Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3362/1: [cleanup] - duplicate decleration of mem_fclk_21285 [ARM] 3365/1: [cleanup] header for compat.c exported functions [ARM] 3364/1: [cleanup] warning fix - definitions for enable_hlt and disable_hlt [ARM] 3363/1: [cleanup] process.c - fix warnings [ARM] 3358/1: [S3C2410] add missing SPI DMA resources [ARM] 3357/1: enable frontlight on collie [ARM] Fix "thead" typo
-
由 Al Viro 提交于
This fixes not one, but _two_, silly (but admittedly hard to hit) bugs in the ext2 filesystem "readdir()" function. It also cleans up the code to avoid the unnecessary goto mess. The bugs were related to re-valiating the f_pos value after somebody had either done an "lseek()" on the directory to an invalid offset, or when the offset had become invalid due to a file being unlinked in the directory. The code would not only set the f_version too eagerly, it would also not update f_pos appropriately for when the offset fixup took place. When that happened, we'd occasionally subsequently fail the readdir() even when we shouldn't (no real harm done, but an ugly printk, and obviously you would end up not necessarily seeing all entries). Thanks to Masoud Sharbiani <masouds@google.com> who noticed the problem and had a test-case for it, and also fixed up a thinko in the first version of this patch. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NMasoud Sharbiani <masouds@google.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ben Dooks 提交于
Patch from Ben Dooks arch/arm/kernel/setup.c declares mem_fclk_21285 when this is already declared in include/asm-arm/system.h Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks arch/arm/kernel/compat.c exports two functions, convert_to_tag_list and squash_mem_tags which are not defined in any header files, and not used outside arch/arm/kernel. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-