提交 fcdb27ad 编写于 作者: R Ralf Baechle

[MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 9414d362
......@@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
......@@ -125,7 +126,7 @@ void __init plat_setup(void)
#endif
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
_machine_power_off = au1000_power_off;
pm_power_off = au1000_power_off;
board_time_init = au1xxx_time_init;
board_timer_setup = au1xxx_timer_setup;
......
......@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
*
*/
......@@ -13,6 +13,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
......@@ -99,7 +100,7 @@ void __init plat_setup(void)
_machine_restart = cobalt_machine_restart;
_machine_halt = cobalt_machine_halt;
_machine_power_off = cobalt_machine_power_off;
pm_power_off = cobalt_machine_power_off;
board_timer_setup = cobalt_timer_setup;
......
......@@ -14,6 +14,7 @@
#include <linux/ide.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
......@@ -95,7 +96,7 @@ void __init plat_setup(void)
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
_machine_power_off = ddb_machine_power_off;
pm_power_off = ddb_machine_power_off;
ddb_out32(DDB_BAR0, 0);
......
......@@ -11,6 +11,7 @@
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
......@@ -133,7 +134,7 @@ void __init plat_setup(void)
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
_machine_power_off = ddb_machine_power_off;
pm_power_off = ddb_machine_power_off;
/* request io port/mem resources */
if (request_resource(&ioport_resource, &ddb5476_ioport.dma1) ||
......
......@@ -26,6 +26,7 @@
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
......@@ -182,7 +183,7 @@ void __init plat_setup(void)
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
_machine_power_off = ddb_machine_power_off;
pm_power_off = ddb_machine_power_off;
/* setup resource limits */
ioport_resource.end = DDB_PCI0_IO_SIZE + DDB_PCI1_IO_SIZE - 1;
......
......@@ -17,6 +17,7 @@
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
......@@ -158,7 +159,7 @@ void __init plat_setup(void)
_machine_restart = dec_machine_restart;
_machine_halt = dec_machine_halt;
_machine_power_off = dec_machine_power_off;
pm_power_off = dec_machine_power_off;
ioport_resource.start = ~0UL;
ioport_resource.end = 0UL;
......
......@@ -34,6 +34,8 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
......@@ -73,7 +75,7 @@ void __init plat_setup(void)
{
_machine_restart = galileo_machine_restart;
_machine_halt = galileo_machine_halt;
_machine_power_off = galileo_machine_power_off;
pm_power_off = galileo_machine_power_off;
board_time_init = gt64120_time_init;
set_io_port_base(KSEG1);
......
......@@ -4,7 +4,7 @@
* BRIEF MODULE DESCRIPTION
* Momentum Computer Ocelot (CP7000) - board dependent boot routines
*
* Copyright (C) 1996, 1997, 2001 Ralf Baechle
* Copyright (C) 1996, 1997, 2001, 06 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
......@@ -47,6 +47,8 @@
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
#include <linux/pm.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
......@@ -159,7 +161,7 @@ void __init plat_setup(void)
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
_machine_power_off = momenco_ocelot_power_off;
pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
......
......@@ -34,6 +34,7 @@
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/time.h>
......@@ -125,7 +126,7 @@ void __init plat_setup(void)
_machine_restart = it8172_restart;
_machine_halt = it8172_halt;
_machine_power_off = it8172_power_off;
pm_power_off = it8172_power_off;
/*
* IO/MEM resources.
......
......@@ -19,6 +19,8 @@
#include <linux/console.h>
#include <linux/fb.h>
#include <linux/ide.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/jazz.h>
......@@ -79,7 +81,7 @@ void __init plat_setup(void)
_machine_restart = jazz_machine_restart;
_machine_halt = jazz_machine_halt;
_machine_power_off = jazz_machine_power_off;
pm_power_off = jazz_machine_power_off;
#warning "Somebody should check if screen_info is ok for Jazz."
......
......@@ -44,6 +44,7 @@
#include <linux/ioport.h>
#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
#include <linux/pm.h>
#ifdef CONFIG_SERIAL_TXX9
#include <linux/tty.h>
#include <linux/serial.h>
......@@ -211,7 +212,7 @@ void __init plat_setup(void)
_machine_restart = jmr3927_machine_restart;
_machine_halt = jmr3927_machine_halt;
_machine_power_off = jmr3927_machine_power_off;
pm_power_off = jmr3927_machine_power_off;
/*
* IO/MEM resources.
......
......@@ -3,13 +3,15 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2001 by Ralf Baechle
* Copyright (C) 2001, 06 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/types.h>
#include <linux/reboot.h>
#include <asm/reboot.h>
/*
......@@ -19,7 +21,7 @@
*/
void (*_machine_restart)(char *command);
void (*_machine_halt)(void);
void (*_machine_power_off)(void);
void (*pm_power_off)(void);
void machine_restart(char *command)
{
......@@ -35,6 +37,6 @@ void machine_halt(void)
void machine_power_off(void)
{
if (_machine_power_off)
_machine_power_off();
if (pm_power_off)
pm_power_off();
}
......@@ -19,9 +19,12 @@
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/pm.h>
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/lasat/lasat.h>
#include "picvue.h"
#include "prom.h"
......@@ -63,5 +66,5 @@ void lasat_reboot_setup(void)
{
_machine_restart = lasat_machine_restart;
_machine_halt = lasat_machine_halt;
_machine_power_off = lasat_machine_halt;
pm_power_off = lasat_machine_halt;
}
......@@ -23,6 +23,7 @@
*
*/
#include <linux/config.h>
#include <linux/pm.h>
#include <asm/io.h>
#include <asm/reboot.h>
......@@ -65,9 +66,9 @@ void mips_reboot_setup(void)
_machine_restart = mips_machine_restart;
_machine_halt = mips_machine_halt;
#if defined(CONFIG_MIPS_ATLAS)
_machine_power_off = atlas_machine_power_off;
pm_power_off = atlas_machine_power_off;
#endif
#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
_machine_power_off = mips_machine_halt;
pm_power_off = mips_machine_halt;
#endif
}
......@@ -50,6 +50,7 @@
#include <linux/pci.h>
#include <linux/swap.h>
#include <linux/ioport.h>
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
......@@ -365,7 +366,7 @@ void __init plat_setup(void)
_machine_restart = momenco_jaguar_restart;
_machine_halt = momenco_jaguar_halt;
_machine_power_off = momenco_jaguar_power_off;
pm_power_off = momenco_jaguar_power_off;
/*
* initrd_start = (ulong)jaguar_initrd_start;
......
......@@ -57,6 +57,8 @@
#include <linux/timex.h>
#include <linux/bootmem.h>
#include <linux/mv643xx.h>
#include <linux/pm.h>
#include <asm/time.h>
#include <asm/page.h>
#include <asm/bootinfo.h>
......@@ -321,7 +323,7 @@ void __init plat_setup(void)
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
_machine_power_off = momenco_ocelot_power_off;
pm_power_off = momenco_ocelot_power_off;
/* Wired TLB entries */
setup_wired_tlb_entries();
......
......@@ -51,8 +51,10 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
......@@ -236,7 +238,7 @@ void __init plat_setup(void)
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
_machine_power_off = momenco_ocelot_power_off;
pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
......
......@@ -47,8 +47,10 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
......@@ -169,7 +171,7 @@ void __init plat_setup(void)
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
_machine_power_off = momenco_ocelot_power_off;
pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
......
......@@ -25,6 +25,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/serial_ip3106.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
......@@ -90,7 +91,7 @@ void __init plat_setup(void)
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
_machine_power_off = pnx8550_machine_power_off;
pm_power_off = pnx8550_machine_power_off;
board_time_init = pnx8550_time_init;
board_timer_setup = pnx8550_timer_setup;
......
......@@ -13,6 +13,7 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/smp.h>
#include <asm/io.h>
......@@ -92,7 +93,7 @@ void __init prom_init(void)
/* Callbacks for halt, restart */
_machine_restart = (void (*)(char *)) prom_exit;
_machine_halt = prom_halt;
_machine_power_off = prom_halt;
pm_power_off = prom_halt;
debug_vectors = cv;
arcs_cmdline[0] = '\0';
......
......@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1997, 1998, 2001, 03, 05 by Ralf Baechle
* Copyright (C) 1997, 1998, 2001, 03, 05, 06 by Ralf Baechle
*/
#include <linux/linkage.h>
#include <linux/init.h>
......@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/notifier.h>
#include <linux/pm.h>
#include <linux/timer.h>
#include <asm/io.h>
......@@ -232,7 +233,7 @@ static int __init reboot_setup(void)
{
_machine_restart = sgi_machine_restart;
_machine_halt = sgi_machine_halt;
_machine_power_off = sgi_machine_power_off;
pm_power_off = sgi_machine_power_off;
request_irq(SGI_PANEL_IRQ, panel_int, 0, "Front Panel", NULL);
init_timer(&blink_timer);
......
......@@ -5,7 +5,7 @@
*
* Reset an IP27.
*
* Copyright (C) 1997, 1998, 1999, 2000 by Ralf Baechle
* Copyright (C) 1997, 1998, 1999, 2000, 06 by Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/config.h>
......@@ -15,6 +15,7 @@
#include <linux/smp.h>
#include <linux/mmzone.h>
#include <linux/nodemask.h>
#include <linux/pm.h>
#include <asm/io.h>
#include <asm/irq.h>
......@@ -77,5 +78,5 @@ void ip27_reboot_setup(void)
{
_machine_restart = ip27_machine_restart;
_machine_halt = ip27_machine_halt;
_machine_power_off = ip27_machine_power_off;
pm_power_off = ip27_machine_power_off;
}
......@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/ds17287rtc.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/irq.h>
......@@ -188,7 +189,7 @@ static __init int ip32_reboot_setup(void)
_machine_restart = ip32_machine_restart;
_machine_halt = ip32_machine_halt;
_machine_power_off = ip32_machine_power_off;
pm_power_off = ip32_machine_power_off;
init_timer(&blink_timer);
blink_timer.function = blink_timeout;
......
......@@ -23,6 +23,7 @@
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/bootmem.h>
#include <linux/pm.h>
#include <linux/smp.h>
#include <asm/bootinfo.h>
......@@ -248,7 +249,7 @@ void __init prom_init(void)
_machine_restart = cfe_linux_restart;
_machine_halt = cfe_linux_halt;
_machine_power_off = cfe_linux_halt;
pm_power_off = cfe_linux_halt;
/*
* Check if a loader was used; if NOT, the 4 arguments are
......
......@@ -24,6 +24,7 @@
#include <linux/bootmem.h>
#include <linux/smp.h>
#include <linux/initrd.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
......@@ -79,7 +80,7 @@ void __init prom_init(void)
{
_machine_restart = (void (*)(char *))prom_linux_exit;
_machine_halt = prom_linux_exit;
_machine_power_off = prom_linux_exit;
pm_power_off = prom_linux_exit;
strcpy(arcs_cmdline, "root=/dev/ram0 ");
......
......@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1996, 97, 98, 2000, 03, 04 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/config.h>
#include <linux/eisa.h>
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mc146818rtc.h>
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/console.h>
#include <linux/fb.h>
......@@ -189,7 +190,7 @@ void __init plat_setup(void)
_machine_restart = sni_machine_restart;
_machine_halt = sni_machine_halt;
_machine_power_off = sni_machine_power_off;
pm_power_off = sni_machine_power_off;
sni_display_setup();
......
......@@ -53,6 +53,8 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
......@@ -814,7 +816,7 @@ void __init toshiba_rbtx4927_setup(void)
":ResetRoutines\n");
_machine_restart = toshiba_rbtx4927_restart;
_machine_halt = toshiba_rbtx4927_halt;
_machine_power_off = toshiba_rbtx4927_power_off;
pm_power_off = toshiba_rbtx4927_power_off;
#ifdef CONFIG_PCI
......
......@@ -20,6 +20,8 @@
#include <linux/interrupt.h>
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <asm/wbflush.h>
#include <asm/reboot.h>
#include <asm/irq.h>
......@@ -1003,7 +1005,7 @@ void __init toshiba_rbtx4938_setup(void)
_machine_restart = rbtx4938_machine_restart;
_machine_halt = rbtx4938_machine_halt;
_machine_power_off = rbtx4938_machine_power_off;
pm_power_off = rbtx4938_machine_power_off;
*rbtx4938_led_ptr = 0xff;
printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr);
......
......@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/pm.h>
#include <linux/smp.h>
#include <linux/types.h>
......@@ -114,7 +115,7 @@ static int __init vr41xx_pmu_init(void)
_machine_restart = vr41xx_restart;
_machine_halt = vr41xx_halt;
_machine_power_off = vr41xx_power_off;
pm_power_off = vr41xx_power_off;
return 0;
}
......
......@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1997, 1999, 2001 by Ralf Baechle
* Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
#ifndef _ASM_REBOOT_H
......@@ -11,6 +11,5 @@
extern void (*_machine_restart)(char *command);
extern void (*_machine_halt)(void);
extern void (*_machine_power_off)(void);
#endif /* _ASM_REBOOT_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册