Skip to content

cloud-kernel
cloud-kernel

bug2833 / cloud-kernel
与 Fork 源项目一致

Fork自 openanolis / cloud-kernel

通知 1
Star 0
Fork 0
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 f72cd138 编写于 作者: J Jody McIntyre 提交者： Linus Torvalds
浏览文件
操作

[PATCH] ieee1394: drivers/ieee1394/pcilynx.c: remove dead options 

The options CONFIG_IEEE1394_PCILYNX_LOCALRAM and CONFIG_IEEE1394_PCILYNX_PORTS
are not available for some time.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 a1446c7f
隐藏空白更改
内联 并排
Showing with 2 addition and 443 deletion
drivers/ieee1394/Kconfig
浏览文件 @ f72cd138
......@@ -84,11 +84,6 @@ config IEEE1394_PCILYNX
To compile this driver as a module, say M here: the
module will be called pcilynx.
# Non-maintained pcilynx options
# if [ "$CONFIG_IEEE1394_PCILYNX" != "n" ]; then
# bool ' Use PCILynx local RAM' CONFIG_IEEE1394_PCILYNX_LOCALRAM
# bool ' Support for non-IEEE1394 local ports' CONFIG_IEEE1394_PCILYNX_PORTS
# fi
config IEEE1394_OHCI1394
tristate "OHCI-1394 support"
depends on PCI && IEEE1394
......
drivers/ieee1394/pcilynx.c
浏览文件 @ f72cd138
......@@ -834,327 +834,6 @@ static int lynx_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
* IEEE-1394 functionality section END *
***************************************/
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
/* VFS functions for local bus / aux device access. Access to those
* is implemented as a character device instead of block devices
* because buffers are not wanted for this. Therefore llseek (from
* VFS) can be used for these char devices with obvious effects.
*/
static int mem_open(struct inode*, struct file*);
static int mem_release(struct inode*, struct file*);
static unsigned int aux_poll(struct file*, struct poll_table_struct*);
static loff_t mem_llseek(struct file*, loff_t, int);
static ssize_t mem_read (struct file*, char*, size_t, loff_t*);
static ssize_t mem_write(struct file*, const char*, size_t, loff_t*);
static struct file_operations aux_ops = {
.owner = THIS_MODULE,
.read = mem_read,
.write = mem_write,
.poll = aux_poll,
.llseek = mem_llseek,
.open = mem_open,
.release = mem_release,
};
static void aux_setup_pcls(struct ti_lynx *lynx)
{
struct ti_pcl pcl;
pcl.next = PCL_NEXT_INVALID;
pcl.user_data = pcl_bus(lynx, lynx->dmem_pcl);
put_pcl(lynx, lynx->dmem_pcl, &pcl);
}
static int mem_open(struct inode *inode, struct file *file)
{
int cid = iminor(inode);
enum { t_rom, t_aux, t_ram } type;
struct memdata *md;
if (cid < PCILYNX_MINOR_AUX_START) {
/* just for completeness */
return -ENXIO;
} else if (cid < PCILYNX_MINOR_ROM_START) {
cid -= PCILYNX_MINOR_AUX_START;
if (cid >= num_of_cards || !cards[cid].aux_port)
return -ENXIO;
type = t_aux;
} else if (cid < PCILYNX_MINOR_RAM_START) {
cid -= PCILYNX_MINOR_ROM_START;
if (cid >= num_of_cards || !cards[cid].local_rom)
return -ENXIO;
type = t_rom;
} else {
/* WARNING: Know what you are doing when opening RAM.
* It is currently used inside the driver! */
cid -= PCILYNX_MINOR_RAM_START;
if (cid >= num_of_cards || !cards[cid].local_ram)
return -ENXIO;
type = t_ram;
}
md = (struct memdata *)kmalloc(sizeof(struct memdata), SLAB_KERNEL);
if (md == NULL)
return -ENOMEM;
md->lynx = &cards[cid];
md->cid = cid;
switch (type) {
case t_rom:
md->type = rom;
break;
case t_ram:
md->type = ram;
break;
case t_aux:
atomic_set(&md->aux_intr_last_seen,
atomic_read(&cards[cid].aux_intr_seen));
md->type = aux;
break;
}
file->private_data = md;
return 0;
}
static int mem_release(struct inode *inode, struct file *file)
{
kfree(file->private_data);
return 0;
}
static unsigned int aux_poll(struct file *file, poll_table *pt)
{
struct memdata *md = (struct memdata *)file->private_data;
int cid = md->cid;
unsigned int mask;
/* reading and writing is always allowed */
mask = POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM;
if (md->type == aux) {
poll_wait(file, &cards[cid].aux_intr_wait, pt);
if (atomic_read(&md->aux_intr_last_seen)
!= atomic_read(&cards[cid].aux_intr_seen)) {
mask |= POLLPRI;
atomic_inc(&md->aux_intr_last_seen);
}
}
return mask;
}
loff_t mem_llseek(struct file *file, loff_t offs, int orig)
{
loff_t newoffs;
switch (orig) {
case 0:
newoffs = offs;
break;
case 1:
newoffs = offs + file->f_pos;
break;
case 2:
newoffs = PCILYNX_MAX_MEMORY + 1 + offs;
break;
default:
return -EINVAL;
}
if (newoffs < 0 || newoffs > PCILYNX_MAX_MEMORY + 1) return -EINVAL;
file->f_pos = newoffs;
return newoffs;
}
/*
* do not DMA if count is too small because this will have a serious impact
* on performance - the value 2400 was found by experiment and may not work
* everywhere as good as here - use mem_mindma option for modules to change
*/
static short mem_mindma = 2400;
module_param(mem_mindma, short, 0444);
MODULE_PARM_DESC(mem_mindma, "Minimum amount of data required to use DMA");
static ssize_t mem_dmaread(struct memdata *md, u32 physbuf, ssize_t count,
int offset)
{
pcltmp_t pcltmp;
struct ti_pcl *pcl;
size_t retval;
int i;
DECLARE_WAITQUEUE(wait, current);
count &= ~3;
count = min(count, 53196);
retval = count;
if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
& DMA_CHAN_CTRL_BUSY) {
PRINT(KERN_WARNING, md->lynx->id, "DMA ALREADY ACTIVE!");
}
reg_write(md->lynx, LBUS_ADDR, md->type | offset);
pcl = edit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp);
pcl->buffer[0].control = PCL_CMD_LBUS_TO_PCI | min(count, 4092);
pcl->buffer[0].pointer = physbuf;
count -= 4092;
i = 0;
while (count > 0) {
i++;
pcl->buffer[i].control = min(count, 4092);
pcl->buffer[i].pointer = physbuf + i * 4092;
count -= 4092;
}
pcl->buffer[i].control |= PCL_LAST_BUFF;
commit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp);
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&md->lynx->mem_dma_intr_wait, &wait);
run_sub_pcl(md->lynx, md->lynx->dmem_pcl, 2, CHANNEL_LOCALBUS);
schedule();
while (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
& DMA_CHAN_CTRL_BUSY) {
if (signal_pending(current)) {
retval = -EINTR;
break;
}
schedule();
}
reg_write(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS), 0);
remove_wait_queue(&md->lynx->mem_dma_intr_wait, &wait);
if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
& DMA_CHAN_CTRL_BUSY) {
PRINT(KERN_ERR, md->lynx->id, "DMA STILL ACTIVE!");
}
return retval;
}
static ssize_t mem_read(struct file *file, char *buffer, size_t count,
loff_t *offset)
{
struct memdata *md = (struct memdata *)file->private_data;
ssize_t bcount;
size_t alignfix;
loff_t off = *offset; /* avoid useless 64bit-arithmetic */
ssize_t retval;
void *membase;
if ((off + count) > PCILYNX_MAX_MEMORY+1) {
count = PCILYNX_MAX_MEMORY+1 - off;
}
if (count == 0 || off > PCILYNX_MAX_MEMORY) {
return -ENOSPC;
}
switch (md->type) {
case rom:
membase = md->lynx->local_rom;
break;
case ram:
membase = md->lynx->local_ram;
break;
case aux:
membase = md->lynx->aux_port;
break;
default:
panic("pcilynx%d: unsupported md->type %d in %s",
md->lynx->id, md->type, __FUNCTION__);
}
down(&md->lynx->mem_dma_mutex);
if (count < mem_mindma) {
memcpy_fromio(md->lynx->mem_dma_buffer, membase+off, count);
goto out;
}
bcount = count;
alignfix = 4 - (off % 4);
if (alignfix != 4) {
if (bcount < alignfix) {
alignfix = bcount;
}
memcpy_fromio(md->lynx->mem_dma_buffer, membase+off,
alignfix);
if (bcount == alignfix) {
goto out;
}
bcount -= alignfix;
off += alignfix;
}
while (bcount >= 4) {
retval = mem_dmaread(md, md->lynx->mem_dma_buffer_dma
+ count - bcount, bcount, off);
if (retval < 0) return retval;
bcount -= retval;
off += retval;
}
if (bcount) {
memcpy_fromio(md->lynx->mem_dma_buffer + count - bcount,
membase+off, bcount);
}
out:
retval = copy_to_user(buffer, md->lynx->mem_dma_buffer, count);
up(&md->lynx->mem_dma_mutex);
if (retval) return -EFAULT;
*offset += count;
return count;
}
static ssize_t mem_write(struct file *file, const char *buffer, size_t count,
loff_t *offset)
{
struct memdata *md = (struct memdata *)file->private_data;
if (((*offset) + count) > PCILYNX_MAX_MEMORY+1) {
count = PCILYNX_MAX_MEMORY+1 - *offset;
}
if (count == 0 || *offset > PCILYNX_MAX_MEMORY) {
return -ENOSPC;
}
/* FIXME: dereferencing pointers to PCI mem doesn't work everywhere */
switch (md->type) {
case aux:
if (copy_from_user(md->lynx->aux_port+(*offset), buffer, count))
return -EFAULT;
break;
case ram:
if (copy_from_user(md->lynx->local_ram+(*offset), buffer, count))
return -EFAULT;
break;
case rom:
/* the ROM may be writeable */
if (copy_from_user(md->lynx->local_rom+(*offset), buffer, count))
return -EFAULT;
break;
}
file->f_pos += count;
return count;
}
#endif /* CONFIG_IEEE1394_PCILYNX_PORTS */
/********************************************************
* Global stuff (interrupt handler, init/shutdown code) *
......@@ -1181,18 +860,6 @@ static irqreturn_t lynx_irq_handler(int irq, void *dev_id,
reg_write(lynx, LINK_INT_STATUS, linkint);
reg_write(lynx, PCI_INT_STATUS, intmask);
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
if (intmask & PCI_INT_AUX_INT) {
atomic_inc(&lynx->aux_intr_seen);
wake_up_interruptible(&lynx->aux_intr_wait);
}
if (intmask & PCI_INT_DMA_HLT(CHANNEL_LOCALBUS)) {
wake_up_interruptible(&lynx->mem_dma_intr_wait);
}
#endif
if (intmask & PCI_INT_1394) {
if (linkint & LINK_INT_PHY_TIMEOUT) {
PRINT(KERN_INFO, lynx->id, "PHY timeout occurred");
......@@ -1484,15 +1151,9 @@ static void remove_card(struct pci_dev *dev)
pci_free_consistent(lynx->dev, PAGE_SIZE, lynx->rcv_page,
lynx->rcv_page_dma);
case have_aux_buf:
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
pci_free_consistent(lynx->dev, 65536, lynx->mem_dma_buffer,
lynx->mem_dma_buffer_dma);
#endif
case have_pcl_mem:
#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM
pci_free_consistent(lynx->dev, LOCALRAM_SIZE, lynx->pcl_mem,
lynx->pcl_mem_dma);
#endif
case clear:
/* do nothing - already freed */
;
......@@ -1546,7 +1207,6 @@ static int __devinit add_card(struct pci_dev *dev,
spin_lock_init(&lynx->lock);
spin_lock_init(&lynx->phy_reg_lock);
#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM
lynx->pcl_mem = pci_alloc_consistent(dev, LOCALRAM_SIZE,
&lynx->pcl_mem_dma);
......@@ -1558,16 +1218,6 @@ static int __devinit add_card(struct pci_dev *dev,
} else {
FAIL("failed to allocate PCL memory area");
}
#endif
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
lynx->mem_dma_buffer = pci_alloc_consistent(dev, 65536,
&lynx->mem_dma_buffer_dma);
if (lynx->mem_dma_buffer == NULL) {
FAIL("failed to allocate DMA buffer for aux");
}
lynx->state = have_aux_buf;
#endif
lynx->rcv_page = pci_alloc_consistent(dev, PAGE_SIZE,
&lynx->rcv_page_dma);
......@@ -1597,13 +1247,6 @@ static int __devinit add_card(struct pci_dev *dev,
FAIL("failed to remap registers - card not accessible");
}
#ifdef CONFIG_IEEE1394_PCILYNX_LOCALRAM
if (lynx->local_ram == NULL) {
FAIL("failed to remap local RAM which is required for "
"operation");
}
#endif
reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
/* Fix buggy cards with autoboot pin not tied low: */
reg_write(lynx, DMA0_CHAN_CTRL, 0);
......@@ -1624,13 +1267,6 @@ static int __devinit add_card(struct pci_dev *dev,
/* alloc_pcl return values are not checked, it is expected that the
* provided PCL space is sufficient for the initial allocations */
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
if (lynx->aux_port != NULL) {
lynx->dmem_pcl = alloc_pcl(lynx);
aux_setup_pcls(lynx);
sema_init(&lynx->mem_dma_mutex, 1);
}
#endif
lynx->rcv_pcl = alloc_pcl(lynx);
lynx->rcv_pcl_start = alloc_pcl(lynx);
lynx->async.pcl = alloc_pcl(lynx);
......@@ -1647,12 +1283,6 @@ static int __devinit add_card(struct pci_dev *dev,
reg_write(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_AUX_INT);
init_waitqueue_head(&lynx->mem_dma_intr_wait);
init_waitqueue_head(&lynx->aux_intr_wait);
#endif
tasklet_init(&lynx->iso_rcv.tq, (void (*)(unsigned long))iso_rcv_bh,
(unsigned long)lynx);
......@@ -1944,37 +1574,18 @@ static int __init pcilynx_init(void)
{
int ret;
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
if (register_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME, &aux_ops)) {
PRINT_G(KERN_ERR, "allocation of char major number %d failed",
PCILYNX_MAJOR);
return -EBUSY;
}
#endif
ret = pci_register_driver(&lynx_pci_driver);
if (ret < 0) {
PRINT_G(KERN_ERR, "PCI module init failed");
goto free_char_dev;
return ret;
}
return 0;
free_char_dev:
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME);
#endif
return ret;
}
static void __exit pcilynx_cleanup(void)
{
pci_unregister_driver(&lynx_pci_driver);
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME);
#endif
}
......
drivers/ieee1394/pcilynx.h
浏览文件 @ f72cd138
......@@ -55,16 +55,6 @@ struct ti_lynx {
void __iomem *aux_port;
quadlet_t bus_info_block[5];
#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
atomic_t aux_intr_seen;
wait_queue_head_t aux_intr_wait;
void *mem_dma_buffer;
dma_addr_t mem_dma_buffer_dma;
struct semaphore mem_dma_mutex;
wait_queue_head_t mem_dma_intr_wait;
#endif
/*
* use local RAM of LOCALRAM_SIZE bytes for PCLs, which allows for
* LOCALRAM_SIZE * 8 PCLs (each sized 128 bytes);
......@@ -72,11 +62,9 @@ struct ti_lynx {
*/
u8 pcl_bmap[LOCALRAM_SIZE / 1024];
#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM
/* point to PCLs memory area if needed */
void *pcl_mem;
dma_addr_t pcl_mem_dma;
#endif
/* PCLs for local mem / aux transfers */
pcl_t dmem_pcl;
......@@ -378,39 +366,6 @@ struct ti_pcl {
#define pcloffs(MEMBER) (offsetof(struct ti_pcl, MEMBER))
#ifdef CONFIG_IEEE1394_PCILYNX_LOCALRAM
static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid,
const struct ti_pcl *pcl)
{
int i;
u32 *in = (u32 *)pcl;
u32 *out = (u32 *)(lynx->local_ram + pclid * sizeof(struct ti_pcl));
for (i = 0; i < 32; i++, out++, in++) {
writel(*in, out);
}
}
static inline void get_pcl(const struct ti_lynx *lynx, pcl_t pclid,
struct ti_pcl *pcl)
{
int i;
u32 *out = (u32 *)pcl;
u32 *in = (u32 *)(lynx->local_ram + pclid * sizeof(struct ti_pcl));
for (i = 0; i < 32; i++, out++, in++) {
*out = readl(in);
}
}
static inline u32 pcl_bus(const struct ti_lynx *lynx, pcl_t pclid)
{
return pci_resource_start(lynx->dev, 1) + pclid * sizeof(struct ti_pcl);
}
#else /* CONFIG_IEEE1394_PCILYNX_LOCALRAM */
static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid,
const struct ti_pcl *pcl)
{
......@@ -431,10 +386,8 @@ static inline u32 pcl_bus(const struct ti_lynx *lynx, pcl_t pclid)
return lynx->pcl_mem_dma + pclid * sizeof(struct ti_pcl);
}
#endif /* CONFIG_IEEE1394_PCILYNX_LOCALRAM */
#if defined (CONFIG_IEEE1394_PCILYNX_LOCALRAM) || defined (__BIG_ENDIAN)
#if defined (__BIG_ENDIAN)
typedef struct ti_pcl pcltmp_t;
static inline struct ti_pcl *edit_pcl(const struct ti_lynx *lynx, pcl_t pclid,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或