提交 e9d21d7f 编写于 作者: K Keith Packard 提交者: Dave Airlie

i915: Protect vblank IRQ reg access with spinlock

This uses the same spinlock as the user_irq code as it shares the same
register, ensuring that interrupt registers are updated atomically.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>
上级 4b408939
......@@ -481,22 +481,24 @@ static int i915_emit_irq(struct drm_device * dev)
void i915_user_irq_get(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
spin_lock(&dev_priv->user_irq_lock);
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1))
i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
spin_unlock(&dev_priv->user_irq_lock);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
void i915_user_irq_put(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
spin_lock(&dev_priv->user_irq_lock);
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0))
i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
spin_unlock(&dev_priv->user_irq_lock);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
static int i915_wait_irq(struct drm_device * dev, int irq_nr)
......@@ -584,33 +586,37 @@ int i915_enable_vblank(struct drm_device *dev, int plane)
int pipe = i915_get_pipe(dev, plane);
u32 pipestat_reg = 0;
u32 pipestat;
u32 interrupt = 0;
unsigned long irqflags;
switch (pipe) {
case 0:
pipestat_reg = PIPEASTAT;
i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT);
interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
break;
case 1:
pipestat_reg = PIPEBSTAT;
i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
break;
default:
DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
pipe);
break;
return 0;
}
if (pipestat_reg) {
pipestat = I915_READ(pipestat_reg);
if (IS_I965G(dev))
pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
else
pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
/* Clear any stale interrupt status */
pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
PIPE_VBLANK_INTERRUPT_STATUS);
I915_WRITE(pipestat_reg, pipestat);
}
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
pipestat = I915_READ(pipestat_reg);
if (IS_I965G(dev))
pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
else
pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
/* Clear any stale interrupt status */
pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
PIPE_VBLANK_INTERRUPT_STATUS);
I915_WRITE(pipestat_reg, pipestat);
(void) I915_READ(pipestat_reg); /* Posting read */
i915_enable_irq(dev_priv, interrupt);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
return 0;
}
......@@ -621,31 +627,36 @@ void i915_disable_vblank(struct drm_device *dev, int plane)
int pipe = i915_get_pipe(dev, plane);
u32 pipestat_reg = 0;
u32 pipestat;
u32 interrupt = 0;
unsigned long irqflags;
switch (pipe) {
case 0:
pipestat_reg = PIPEASTAT;
i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT);
interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
break;
case 1:
pipestat_reg = PIPEBSTAT;
i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
break;
default:
DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
pipe);
return;
break;
}
if (pipestat_reg) {
pipestat = I915_READ(pipestat_reg);
pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
PIPE_VBLANK_INTERRUPT_ENABLE);
/* Clear any stale interrupt status */
pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
PIPE_VBLANK_INTERRUPT_STATUS);
I915_WRITE(pipestat_reg, pipestat);
}
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
i915_disable_irq(dev_priv, interrupt);
pipestat = I915_READ(pipestat_reg);
pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
PIPE_VBLANK_INTERRUPT_ENABLE);
/* Clear any stale interrupt status */
pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
PIPE_VBLANK_INTERRUPT_STATUS);
I915_WRITE(pipestat_reg, pipestat);
(void) I915_READ(pipestat_reg); /* Posting read */
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
/* Set the vblank monitor pipe
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册