提交 e5bdfd50 编写于 作者: G Greg Kroah-Hartman

Revert "usb: hub: do not clear BOS field during reset device"

This reverts commit d8f00cd6.

Tony writes:

This upstream commit is causing an oops:
d8f00cd6 ("usb: hub: do not clear BOS field during reset device")

This patch has already been included in several -stable kernels.  Here
are the affected kernels:
4.5.0-rc4 (current git)
4.4.2
4.3.6 (currently in review)
4.1.18
3.18.27
3.14.61

How to reproduce the problem:
Boot kernel with slub debugging enabled (otherwise memory corruption
will cause random oopses later instead of immediately)
Plug in USB 3.0 disk to xhci USB 3.0 port
dd if=/dev/sdc of=/dev/null bs=65536
(where /dev/sdc is the USB 3.0 disk)
Unplug USB cable while dd is still going
Oops is immediate:
Reported-by: NTony Battersby <tonyb@cybernetics.com>
Cc: Du, Changbin <changbin.du@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 f9a96d2e
......@@ -5401,6 +5401,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
}
bos = udev->bos;
udev->bos = NULL;
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
......@@ -5493,11 +5494,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
usb_set_usb2_hardware_lpm(udev, 1);
usb_unlocked_enable_lpm(udev);
usb_enable_ltm(udev);
/* release the new BOS descriptor allocated by hub_port_init() */
if (udev->bos != bos) {
usb_release_bos_descriptor(udev);
udev->bos = bos;
}
usb_release_bos_descriptor(udev);
udev->bos = bos;
return 0;
re_enumerate:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册