提交 e15f6870 编写于 作者: P Paul Mundt

sh: Support userimask for all SH-X3 interrupt controllers.

This shuffles some of the shared bits out of the 7786 code and in to a
shared SH-X3 support file. Presently just for userimask, but also a good
place for the IRQ balancing wrappers.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 5924ad0d
......@@ -8,13 +8,13 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7763) += setup-sh7763.o
obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o
obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o intc-shx3.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o
obj-$(CONFIG_CPU_SUBTYPE_SH7724) += setup-sh7724.o
obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o intc-shx3.o
# SMP setup
smp-$(CONFIG_CPU_SHX3) := smp-shx3.o
......
/*
* Shared support for SH-X3 interrupt controllers.
*
* Copyright (C) 2009 - 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/init.h>
#define INTACK 0xfe4100b8
#define INTACKCLR 0xfe4100bc
#define INTC_USERIMASK 0xfe411000
#ifdef CONFIG_INTC_BALANCING
unsigned int irq_lookup(unsigned int irq)
{
return __raw_readl(INTACK) & 1 ? irq : NO_IRQ_IGNORE;
}
void irq_finish(unsigned int irq)
{
__raw_writel(irq2evt(irq), INTACKCLR);
}
#endif
static int __init shx3_irq_setup(void)
{
return register_intc_userimask(INTC_USERIMASK);
}
arch_initcall(shx3_irq_setup);
......@@ -756,8 +756,6 @@ static struct intc_vect vectors[] __initdata = {
#define INTDISTCR0 0xfe4100b0
#define INTDISTCR1 0xfe4100b4
#define INTACK 0xfe4100b8
#define INTACKCLR 0xfe4100bc
#define INT2DISTCR0 0xfe410900
#define INT2DISTCR1 0xfe410904
#define INT2DISTCR2 0xfe410908
......@@ -920,19 +918,6 @@ static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567,
#define INTC_INTMSK2 INTMSK2
#define INTC_INTMSKCLR1 CnINTMSKCLR1
#define INTC_INTMSKCLR2 INTMSKCLR2
#define INTC_USERIMASK 0xfe411000
#ifdef CONFIG_INTC_BALANCING
unsigned int irq_lookup(unsigned int irq)
{
return __raw_readl(INTACK) & 1 ? irq : NO_IRQ_IGNORE;
}
void irq_finish(unsigned int irq)
{
__raw_writel(irq2evt(irq), INTACKCLR);
}
#endif
void __init plat_irq_setup(void)
{
......@@ -947,7 +932,6 @@ void __init plat_irq_setup(void)
__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
register_intc_controller(&intc_desc);
register_intc_userimask(INTC_USERIMASK);
}
void __init plat_irq_setup_pins(int mode)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册