stmmac: add CSR Clock range selection

This patch adds the CSR Clock range selection.

Original patch from Johannes Stezenbach fixed the CSR
in the stmmac_mdio. We agreed to provide this through
the platform instead of.
Also thanks to Johannes for having tested it on ARM.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NJohannes Stezenbach <js@sig21.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/stmmac/stmmac.h

@@ -78,6 +78,7 @@ struct stmmac_priv {
 	unsigned int flow_ctrl;
 	unsigned int pause;
 	struct mii_bus *mii;
+	int mii_clk_csr;
 
 	u32 msg_enable;
 	spinlock_t lock;

drivers/net/stmmac/stmmac_main.c

@@ -1704,6 +1704,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
 	plat_dat = pdev->dev.platform_data;
 	priv->bus_id = plat_dat->bus_id;
 	priv->pbl = plat_dat->pbl;	/* TLI */
+	priv->mii_clk_csr = plat_dat->clk_csr;
 	priv->is_gmac = plat_dat->has_gmac;	/* GMAC is on board */
 	priv->enh_desc = plat_dat->enh_desc;
 	priv->ioaddr = addr;

drivers/net/stmmac/stmmac_mdio.c

@@ -53,7 +53,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 	int data;
 	u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
 			((phyreg << 6) & (0x000007C0)));
-	regValue |= MII_BUSY;	/* in case of GMAC */
+	regValue |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2);
 
 	do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
 	writel(regValue, priv->ioaddr + mii_address);
@@ -85,7 +85,8 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
 	    (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
 	    | MII_WRITE;
 
-	value |= MII_BUSY;
+	value |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2);
+
 
 	/* Wait until any existing MII operation is complete */
 	do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);

include/linux/stmmac.h

@@ -32,6 +32,7 @@
 struct plat_stmmacenet_data {
 	int bus_id;
 	int pbl;
+	int clk_csr;
 	int has_gmac;
 	int enh_desc;
 	void (*fix_mac_speed)(void *priv, unsigned int speed);