[ALSA] alsa-kernel: schedule_timeout() fixes

Fix schedule_timeout() use in alsa-kernel. Mostly just
	schedule_timeout(1) --> schedule_timeout_uninterruptible(1)
The wavefront_synth one fixes the surrounding loop as well. In ymfpci_main,
delete a superfluous set_current_state() and in soc/soc-dapm.c replace an
_interruptible with _uninterruptible in some debug code; it's not waiting
for signals.

Signed-off-by: Rene Herman <rene.herman>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

sound/isa/sscape.c

@@ -401,7 +401,7 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout)
 		unsigned long flags;
 		unsigned char x;
 
-		schedule_timeout(1);
+		schedule_timeout_uninterruptible(1);
 
 		spin_lock_irqsave(&s->lock, flags);
 		x = inb(HOST_DATA_IO(s->io_base));
@@ -428,7 +428,7 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout)
 		unsigned long flags;
 		unsigned char x;
 
-		schedule_timeout(1);
+		schedule_timeout_uninterruptible(1);
 
 		spin_lock_irqsave(&s->lock, flags);
 		x = inb(HOST_DATA_IO(s->io_base));

sound/isa/wavefront/wavefront_synth.c

@@ -1768,7 +1768,7 @@ snd_wavefront_interrupt_bits (int irq)
 
 static void __devinit
 wavefront_should_cause_interrupt (snd_wavefront_t *dev, 
-				  int val, int port, int timeout)
+				  int val, int port, unsigned long timeout)
 
 {
 	wait_queue_t wait;
@@ -1779,11 +1779,9 @@ wavefront_should_cause_interrupt (snd_wavefront_t *dev,
 	dev->irq_ok = 0;
 	outb (val,port);
 	spin_unlock_irq(&dev->irq_lock);
-	while (1) {
-		if ((timeout = schedule_timeout(timeout)) == 0)
-			return;
-		if (dev->irq_ok)
-			return;
+	while (!dev->irq_ok && time_before(jiffies, timeout)) {
+		schedule_timeout_uninterruptible(1);
+		barrier();
 	}
 }
 

sound/pci/hda/hda_intel.c

@@ -555,7 +555,7 @@ static unsigned int azx_rirb_get_response(struct hda_codec *codec)
 		}
 		if (!chip->rirb.cmds)
 			return chip->rirb.res; /* the last value */
-		schedule_timeout(1);
+		schedule_timeout_uninterruptible(1);
 	} while (time_after_eq(timeout, jiffies));
 
 	if (chip->msi) {

sound/pci/via82xx.c

@@ -2090,7 +2090,7 @@ static int snd_via82xx_chip_init(struct via82xx *chip)
 		pci_read_config_byte(chip->pci, VIA_ACLINK_STAT, &pval);
 		if (pval & VIA_ACLINK_C00_READY) /* primary codec ready */
 			break;
-		schedule_timeout(1);
+		schedule_timeout_uninterruptible(1);
 	} while (time_before(jiffies, end_time));
 
 	if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
@@ -2109,7 +2109,7 @@ static int snd_via82xx_chip_init(struct via82xx *chip)
 			chip->ac97_secondary = 1;
 			goto __ac97_ok2;
 		}
-		schedule_timeout(1);
+		schedule_timeout_uninterruptible(1);
 	} while (time_before(jiffies, end_time));
 	/* This is ok, the most of motherboards have only one codec */
 

sound/pci/via82xx_modem.c

@@ -983,7 +983,7 @@ static int snd_via82xx_chip_init(struct via82xx_modem *chip)
 		pci_read_config_byte(chip->pci, VIA_ACLINK_STAT, &pval);
 		if (pval & VIA_ACLINK_C00_READY) /* primary codec ready */
 			break;
-		schedule_timeout(1);
+		schedule_timeout_uninterruptible(1);
 	} while (time_before(jiffies, end_time));
 
 	if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
@@ -1001,7 +1001,7 @@ static int snd_via82xx_chip_init(struct via82xx_modem *chip)
 			chip->ac97_secondary = 1;
 			goto __ac97_ok2;
 		}
-		schedule_timeout(1);
+		schedule_timeout_uninterruptible(1);
 	} while (time_before(jiffies, end_time));
 	/* This is ok, the most of motherboards have only one codec */
 

sound/pci/ymfpci/ymfpci_main.c

@@ -84,7 +84,6 @@ static int snd_ymfpci_codec_ready(struct snd_ymfpci *chip, int secondary)
 	do {
 		if ((snd_ymfpci_readw(chip, reg) & 0x8000) == 0)
 			return 0;
-		set_current_state(TASK_UNINTERRUPTIBLE);
 		schedule_timeout_uninterruptible(1);
 	} while (time_before(jiffies, end_time));
 	snd_printk(KERN_ERR "codec_ready: codec %i is not ready [0x%x]\n", secondary, snd_ymfpci_readw(chip, reg));

sound/soc/soc-dapm.c

@@ -63,7 +63,7 @@
 #define POP_DEBUG 0
 #if POP_DEBUG
 #define POP_TIME 500 /* 500 msecs - change if pop debug is too fast */
-#define pop_wait(time) schedule_timeout_interruptible(msecs_to_jiffies(time))
+#define pop_wait(time) schedule_timeout_uninterruptible(msecs_to_jiffies(time))
 #define pop_dbg(format, arg...) printk(format, ## arg); pop_wait(POP_TIME)
 #else
 #define pop_dbg(format, arg...)