Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: use MII hooks only if CONFIG_MII is enabled
  USB Storage: unusual_devs.h entry for Sony Ericsson P990i
  USB: xpad: additional USB id's added
  USB: fix compiler issues with newer gcc versions
  USB: HID: add blacklist AIRcable USB, little beautification
  USB: usblp: fix system suspend for some systems
  USB: failure in usblp's error path
  usbtouchscreen: use endpoint address from endpoint descriptor
  USB: sierra: Fix id for Sierra Wireless MC8755 in new table
  USB: new VID/PID-combos for cp2101
  hid-core: big-endian fix fix
  USB: usb-storage: Unusual_dev update
  USB: add another sierra wireless device id

Documentation/usb/usb-serial.txt

@@ -428,12 +428,6 @@ Options supported:
   See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
   information on this driver.
 
-AIRcable USB Dongle Bluetooth driver
-  If there is the cdc_acm driver loaded in the system, you will find that the
-  cdc_acm claims the device before AIRcable can. This is simply corrected
-  by unloading both modules and then loading the aircable module before
-  cdc_acm module
-
 Generic Serial driver
 
   If your device is not one of the above listed devices, compatible with

drivers/usb/class/usblp.c

@@ -722,6 +722,7 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t
 		usblp->wcomplete = 0;
 		err = usb_submit_urb(usblp->writeurb, GFP_KERNEL);
 		if (err) {
+			usblp->wcomplete = 1;
 			if (err != -ENOMEM)
 				count = -EIO;
 			else
@@ -1202,8 +1203,6 @@ static int usblp_suspend (struct usb_interface *intf, pm_message_t message)
 	down (&usblp->sem);
 	/* we take no more IO */
 	usblp->sleeping = 1;
-	/* we wait for anything printing */
-	wait_event (usblp->wait, usblp->wcomplete || !usblp->present);
 	usblp_unlink_urbs(usblp);
 	up (&usblp->sem);
 	mutex_unlock (&usblp_mutex);

drivers/usb/core/hub.c

@@ -1188,6 +1188,7 @@ static inline void show_string(struct usb_device *udev, char *id, char *string)
 
 #ifdef	CONFIG_USB_OTG
 #include "otg_whitelist.h"
+static int __usb_port_suspend(struct usb_device *, int port1);
 #endif
 
 /**
@@ -1289,8 +1290,6 @@ int usb_new_device(struct usb_device *udev)
 		 * (Includes HNP test device.)
 		 */
 		if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
-			static int __usb_port_suspend(struct usb_device *,
-						int port1);
 			err = __usb_port_suspend(udev, udev->bus->otg_port);
 			if (err < 0)
 				dev_dbg(&udev->dev, "HNP fail, %d\n", err);

drivers/usb/input/hid-core.c

@@ -270,7 +270,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
  * Read data value from item.
  */
 
-static __inline__ __u32 item_udata(struct hid_item *item)
+static u32 item_udata(struct hid_item *item)
 {
 	switch (item->size) {
 		case 1: return item->data.u8;
@@ -280,7 +280,7 @@ static __inline__ __u32 item_udata(struct hid_item *item)
 	return 0;
 }
 
-static __inline__ __s32 item_sdata(struct hid_item *item)
+static s32 item_sdata(struct hid_item *item)
 {
 	switch (item->size) {
 		case 1: return item->data.s8;
@@ -727,7 +727,7 @@ static struct hid_device *hid_parse_report(__u8 *start, unsigned size)
  * done by hand.
  */
 
-static __inline__ __s32 snto32(__u32 value, unsigned n)
+static s32 snto32(__u32 value, unsigned n)
 {
 	switch (n) {
 		case 8:  return ((__s8)value);
@@ -741,9 +741,9 @@ static __inline__ __s32 snto32(__u32 value, unsigned n)
  * Convert a signed 32-bit integer to a signed n-bit integer.
  */
 
-static __inline__ __u32 s32ton(__s32 value, unsigned n)
+static u32 s32ton(__s32 value, unsigned n)
 {
-	__s32 a = value >> (n - 1);
+	s32 a = value >> (n - 1);
 	if (a && a != -1)
 		return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1;
 	return value & ((1 << n) - 1);
@@ -751,30 +751,55 @@ static __inline__ __u32 s32ton(__s32 value, unsigned n)
 
 /*
  * Extract/implement a data field from/to a little endian report (bit array).
+ *
+ * Code sort-of follows HID spec:
+ *     http://www.usb.org/developers/devclass_docs/HID1_11.pdf
+ *
+ * While the USB HID spec allows unlimited length bit fields in "report
+ * descriptors", most devices never use more than 16 bits.
+ * One model of UPS is claimed to report "LINEV" as a 32-bit field.
+ * Search linux-kernel and linux-usb-devel archives for "hid-core extract".
  */
 
 static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
 {
-	u32 x;
+	u64 x;
+
+	WARN_ON(n > 32);
 
 	report += offset >> 3;  /* adjust byte index */
-	offset &= 8 - 1;
-	x = get_unaligned((u32 *) report);
-	x = le32_to_cpu(x);
-	x = (x >> offset) & ((1 << n) - 1);
-	return x;
+	offset &= 7;		/* now only need bit offset into one byte */
+	x = get_unaligned((u64 *) report);
+	x = le64_to_cpu(x);
+	x = (x >> offset) & ((1ULL << n) - 1);	/* extract bit field */
+	return (u32) x;
 }
 
+/*
+ * "implement" : set bits in a little endian bit stream.
+ * Same concepts as "extract" (see comments above).
+ * The data mangled in the bit stream remains in little endian
+ * order the whole time. It make more sense to talk about
+ * endianness of register values by considering a register
+ * a "cached" copy of the little endiad bit stream.
+ */
 static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
 {
-	u32 x;
+	u64 x;
+	u64 m = (1ULL << n) - 1;
+
+	WARN_ON(n > 32);
+
+	WARN_ON(value > m);
+	value &= m;
 
 	report += offset >> 3;
-	offset &= 8 - 1;
-	x = get_unaligned((u32 *)report);
-	x &= cpu_to_le32(~((((__u32) 1 << n) - 1) << offset));
-	x |= cpu_to_le32(value << offset);
-	put_unaligned(x,(u32 *)report);
+	offset &= 7;
+
+	x = get_unaligned((u64 *)report);
+	x &= cpu_to_le64(~(m << offset));
+	x |= cpu_to_le64(((u64) value) << offset);
+	put_unaligned(x, (u64 *) report);
 }
 
 /*
@@ -1615,6 +1640,9 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_SUN		0x0430
 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE	0xcdab
 
+#define USB_VENDOR_ID_AIRCABLE		0x16CA
+#define USB_DEVICE_ID_AIRCABLE1		0x1502
+
 /*
  * Alphabetically sorted blacklist by quirk type.
  */
@@ -1632,6 +1660,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE },

drivers/usb/input/usbtouchscreen.c

@@ -640,7 +640,7 @@ static int usbtouch_probe(struct usb_interface *intf,
 		                     type->max_press, 0, 0);
 
 	usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
-			 usb_rcvintpipe(usbtouch->udev, 0x81),
+			 usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
 			 usbtouch->data, type->rept_size,
 			 usbtouch_irq, usbtouch, endpoint->bInterval);
 

drivers/usb/input/xpad.c

@@ -2,6 +2,10 @@
  * X-Box gamepad - v0.0.6
  *
  * Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de>
+ *               2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>,
+ *                    Steven Toth <steve@toth.demon.co.uk>,
+ *                    Franz Lehner <franz@caos.at>,
+ *                    Ivan Hawkes <blackhawk@ivanhawkes.com>
  *               2005 Dominic Cerquetti <binary1230@yahoo.com>
  *               2006 Adam Buchbinder <adam.buchbinder@gmail.com>
  *
@@ -29,6 +33,7 @@
  *  - ITO Takayuki for providing essential xpad information on his website
  *  - Vojtech Pavlik     - iforce driver / input subsystem
  *  - Greg Kroah-Hartman - usb-skeleton driver
+ *  - XBOX Linux project - extra USB id's
  *
  * TODO:
  *  - fine tune axes (especially trigger axes)
@@ -54,6 +59,13 @@
  *  - fixed d-pad to axes mapping
  *
  * 2002-07-17 - 0.0.5 : simplified d-pad handling
+ *
+ * 2004-10-02 - 0.0.6 : DDR pad support
+ *  - borrowed from the XBOX linux kernel
+ *  - USB id's for commonly used dance pads are present
+ *  - dance pads will map D-PAD to buttons, not axes
+ *  - pass the module paramater 'dpad_to_buttons' to force
+ *    the D-PAD to map to buttons if your pad is not detected
  */
 
 #include <linux/kernel.h>
@@ -90,8 +102,35 @@ static const struct xpad_device {
 	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES },
 	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES },
 	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES },
-	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES },
 	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS },
+	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES },
+	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES },
+	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES },
+	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES },
+	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS },
+	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES },
+	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS },
+	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES },
+	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES },
+	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES},
+	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES },
+	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES },
+	{ 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES },
+	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES },
+	{ 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES },
+	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES },
+	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES },
+	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS },
+	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS },
+	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES },
 	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN }
 };
 

drivers/usb/net/Kconfig

@@ -92,8 +92,13 @@ config USB_RTL8150
 	  To compile this driver as a module, choose M here: the
 	  module will be called rtl8150.
 
+config USB_USBNET_MII
+	tristate
+	default n
+
 config USB_USBNET
 	tristate "Multi-purpose USB Networking Framework"
+	select MII if USBNET_MII != n
 	---help---
 	  This driver supports several kinds of network links over USB,
 	  with "minidrivers" built around a common network driver core
@@ -129,7 +134,7 @@ config USB_NET_AX8817X
 	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
 	depends on USB_USBNET && NET_ETHERNET
 	select CRC32
-	select MII
+	select USB_USBNET_MII
 	default y
 	help
 	  This option adds support for ASIX AX88xxx based USB 2.0
@@ -210,6 +215,7 @@ config USB_NET_PLUSB
 config USB_NET_MCS7830
 	tristate "MosChip MCS7830 based Ethernet adapters"
 	depends on USB_USBNET
+	select USB_USBNET_MII
 	help
 	  Choose this option if you're using a 10/100 Ethernet USB2
 	  adapter based on the MosChip 7830 controller. This includes

drivers/usb/net/usbnet.c

@@ -669,6 +669,9 @@ static int usbnet_open (struct net_device *net)
  * they'll probably want to use this base set.
  */
 
+#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
+#define HAVE_MII
+
 int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
 {
 	struct usbnet *dev = netdev_priv(net);
@@ -699,20 +702,6 @@ int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
 }
 EXPORT_SYMBOL_GPL(usbnet_set_settings);
 
-
-void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	/* REVISIT don't always return "usbnet" */
-	strncpy (info->driver, driver_name, sizeof info->driver);
-	strncpy (info->version, DRIVER_VERSION, sizeof info->version);
-	strncpy (info->fw_version, dev->driver_info->description,
-		sizeof info->fw_version);
-	usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
-}
-EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
-
 u32 usbnet_get_link (struct net_device *net)
 {
 	struct usbnet *dev = netdev_priv(net);
@@ -730,40 +719,57 @@ u32 usbnet_get_link (struct net_device *net)
 }
 EXPORT_SYMBOL_GPL(usbnet_get_link);
 
-u32 usbnet_get_msglevel (struct net_device *net)
+int usbnet_nway_reset(struct net_device *net)
 {
 	struct usbnet *dev = netdev_priv(net);
 
-	return dev->msg_enable;
+	if (!dev->mii.mdio_write)
+		return -EOPNOTSUPP;
+
+	return mii_nway_restart(&dev->mii);
 }
-EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
+EXPORT_SYMBOL_GPL(usbnet_nway_reset);
 
-void usbnet_set_msglevel (struct net_device *net, u32 level)
+#endif	/* HAVE_MII */
+
+void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
 {
 	struct usbnet *dev = netdev_priv(net);
 
-	dev->msg_enable = level;
+	/* REVISIT don't always return "usbnet" */
+	strncpy (info->driver, driver_name, sizeof info->driver);
+	strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+	strncpy (info->fw_version, dev->driver_info->description,
+		sizeof info->fw_version);
+	usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
 }
-EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
+EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
 
-int usbnet_nway_reset(struct net_device *net)
+u32 usbnet_get_msglevel (struct net_device *net)
 {
 	struct usbnet *dev = netdev_priv(net);
 
-	if (!dev->mii.mdio_write)
-		return -EOPNOTSUPP;
+	return dev->msg_enable;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
 
-	return mii_nway_restart(&dev->mii);
+void usbnet_set_msglevel (struct net_device *net, u32 level)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	dev->msg_enable = level;
 }
-EXPORT_SYMBOL_GPL(usbnet_nway_reset);
+EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
 
 /* drivers may override default ethtool_ops in their bind() routine */
 static struct ethtool_ops usbnet_ethtool_ops = {
+#ifdef	HAVE_MII
 	.get_settings		= usbnet_get_settings,
 	.set_settings		= usbnet_set_settings,
-	.get_drvinfo		= usbnet_get_drvinfo,
 	.get_link		= usbnet_get_link,
 	.nway_reset		= usbnet_nway_reset,
+#endif
+	.get_drvinfo		= usbnet_get_drvinfo,
 	.get_msglevel		= usbnet_get_msglevel,
 	.set_msglevel		= usbnet_set_msglevel,
 };

drivers/usb/serial/Kconfig

@@ -54,10 +54,10 @@ config USB_SERIAL_GENERIC
 	  properly.
 
 config USB_SERIAL_AIRCABLE
-	tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)"
+	tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
 	help
-	    Say Y here if you want to use AIRcable USB Bluetoot Dongle.
+	    Say Y here if you want to use USB AIRcable Bluetooth Dongle.
 
 	    To compile this driver as a module, choose M here: the module
 	    will be called aircable.

drivers/usb/serial/cp2101.c

@@ -64,6 +64,9 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */

drivers/usb/serial/sierra.c

@@ -35,6 +35,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
+	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
 	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 for Europe */
@@ -58,8 +59,10 @@ static struct usb_device_id id_table_3port [] = {
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
+	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 for Europe */
 	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 */
 	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
 	{ }

drivers/usb/storage/unusual_devs.h

@@ -1236,7 +1236,7 @@ UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
 		"Cowon Systems",
 		"iAUDIO M5",
 		US_SC_DEVICE, US_PR_BULK, NULL,
-		0 ),
+		US_FL_NEED_OVERRIDE ),
 
 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
@@ -1313,6 +1313,13 @@ UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Jan Mate <mate@fiit.stuba.sk> */
+UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"P990i",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
  * Tested on hardware version 1.10.
  * Entry is needed only for the initializer function override.