ASoC: Always syncronize audio transfers on frames

All these steps are required for ASoC to behave correctly.
rccr and xccr are format dependent, for example TDM audio
has different values than I2S or DSP_A. Also the
omap_mcbsp_xmit_enable and/or omap_mcbsp_recv_enable must
be called right after the DMA has started.
This provides no longer L and R channels switching at random.
Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: NJarkko Nikula <jhnikula@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

sound/soc/omap/omap-mcbsp.c

@@ -191,6 +191,11 @@ static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd,
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		mcbsp_data->active++;
 		omap_mcbsp_start(mcbsp_data->bus_id, play, !play);
+		/* Make sure data transfer is frame synchronized */
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			omap_mcbsp_xmit_enable(mcbsp_data->bus_id, 1);
+		else
+			omap_mcbsp_recv_enable(mcbsp_data->bus_id, 1);
 		break;
 
 	case SNDRV_PCM_TRIGGER_STOP:
@@ -336,11 +341,15 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		/* 1-bit data delay */
 		regs->rcr2	|= RDATDLY(1);
 		regs->xcr2	|= XDATDLY(1);
+		regs->rccr	|= RFULL_CYCLE | RDMAEN | RDISABLE;
+		regs->xccr	|= (DXENDLY(1) | XDMAEN | XDISABLE);
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
 		/* 1-bit data delay */
 		regs->rcr2      |= RDATDLY(1);
 		regs->xcr2      |= XDATDLY(1);
+		regs->rccr	|= RFULL_CYCLE | RDMAEN | RDISABLE;
+		regs->xccr	|= (DXENDLY(1) | XDMAEN | XDISABLE);
 		/* Invert FS polarity configuration */
 		temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
 		break;