提交 b8228758 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-misc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-misc: (28 commits)
  x86: section mismatch fixes, #3
  x86: section mismatch fixes, #2
  x86: pgtable_32.h - prototype and section mismatch fixes
  x86: unlock_ExtINT_logic() - fix section mismatch warnings
  x86: uniq_ioapic_id - fix section mismatch warning
  x86: trampoline_32.S - switch to .cpuinit.data
  x86: use get_bios_ebda()
  x86: remove duplicate get_bios_ebda() from rio.h
  x86: get_bios_ebda() requires asm/io.h
  x86: use cpumask function for present, possible, and online cpus
  x86: cleanup div_sc() usage
  x86: cleanup clocksource_hz2mult usage
  x86: remove unnecessary memset and NULL check after alloc_bootmem()
  x86: use bitmap library for pin_programmed
  x86: use MP_intsrc_info()
  x86: use BUILD_BUG_ON() for the size of struct intel_mp_floating
  x86_64 ia32 ptrace: convert to compat_arch_ptrace
  x86_64 ia32 ptrace: use compat_ptrace_request for siginfo
  x86 signals: lift set_fs
  x86 signals: lift flags diddling code
  ...
......@@ -21,8 +21,8 @@ config M386
Here are the settings recommended for greatest speed:
- "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels
will run on a 386 class machine.
486DLC/DLC2, and UMC 486SX-S. Only "386" kernels will run on a 386
class machine.
- "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
- "586" for generic Pentium CPUs lacking the TSC
......
......@@ -499,11 +499,6 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
regs->cs = __USER32_CS;
regs->ss = __USER32_DS;
set_fs(USER_DS);
regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
#if DEBUG_SIG
printk(KERN_DEBUG "SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n",
current->comm, current->pid, frame, regs->ip, frame->pretcode);
......@@ -599,11 +594,6 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
regs->cs = __USER32_CS;
regs->ss = __USER32_DS;
set_fs(USER_DS);
regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
#if DEBUG_SIG
printk(KERN_DEBUG "SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n",
current->comm, current->pid, frame, regs->ip, frame->pretcode);
......
......@@ -430,7 +430,7 @@ ia32_sys_call_table:
.quad sys_setuid16
.quad sys_getuid16
.quad compat_sys_stime /* stime */ /* 25 */
.quad sys32_ptrace /* ptrace */
.quad compat_sys_ptrace /* ptrace */
.quad sys_alarm
.quad sys_fstat /* (old)fstat */
.quad sys_pause
......
......@@ -697,10 +697,6 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table)
#define HPET_RESOURCE_NAME_SIZE 9
hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE);
if (!hpet_res)
return 0;
memset(hpet_res, 0, sizeof(*hpet_res));
hpet_res->name = (void *)&hpet_res[1];
hpet_res->flags = IORESOURCE_MEM;
snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u",
......
......@@ -451,7 +451,8 @@ void __init setup_boot_APIC_clock(void)
}
/* Calculate the scaled math multiplication factor */
lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS, 32);
lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
lapic_clockevent.shift);
lapic_clockevent.max_delta_ns =
clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
lapic_clockevent.min_delta_ns =
......
......@@ -360,7 +360,8 @@ static void __init calibrate_APIC_clock(void)
result / 1000 / 1000, result / 1000 % 1000);
/* Calculate the scaled math multiplication factor */
lapic_clockevent.mult = div_sc(result, NSEC_PER_SEC, 32);
lapic_clockevent.mult = div_sc(result, NSEC_PER_SEC,
lapic_clockevent.shift);
lapic_clockevent.max_delta_ns =
clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
lapic_clockevent.min_delta_ns =
......
......@@ -11,7 +11,6 @@ obj-$(CONFIG_X86_32) += cyrix.o
obj-$(CONFIG_X86_32) += centaur.o
obj-$(CONFIG_X86_32) += transmeta.o
obj-$(CONFIG_X86_32) += intel.o
obj-$(CONFIG_X86_32) += nexgen.o
obj-$(CONFIG_X86_32) += umc.o
obj-$(CONFIG_X86_MCE) += mcheck/
......
......@@ -343,10 +343,4 @@ static struct cpu_dev amd_cpu_dev __cpuinitdata = {
.c_size_cache = amd_size_cache,
};
int __init amd_init_cpu(void)
{
cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev;
return 0;
}
cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
......@@ -49,7 +49,7 @@ static int banks;
static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL };
static unsigned long notify_user;
static int rip_msr;
static int mce_bootlog = 1;
static int mce_bootlog = -1;
static atomic_t mce_events;
static char trigger[128];
......@@ -471,13 +471,15 @@ static void mce_init(void *dummy)
static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
{
/* This should be disabled by the BIOS, but isn't always */
if (c->x86_vendor == X86_VENDOR_AMD && c->x86 == 15) {
/* disable GART TBL walk error reporting, which trips off
incorrectly with the IOMMU & 3ware & Cerberus. */
clear_bit(10, &bank[4]);
/* Lots of broken BIOS around that don't clear them
by default and leave crap in there. Don't log. */
mce_bootlog = 0;
if (c->x86_vendor == X86_VENDOR_AMD) {
if(c->x86 == 15)
/* disable GART TBL walk error reporting, which trips off
incorrectly with the IOMMU & 3ware & Cerberus. */
clear_bit(10, &bank[4]);
if(c->x86 <= 17 && mce_bootlog < 0)
/* Lots of broken BIOS around that don't clear them
by default and leave crap in there. Don't log. */
mce_bootlog = 0;
}
}
......
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
#include <asm/processor.h>
#include "cpu.h"
/*
* Detect a NexGen CPU running without BIOS hypercode new enough
* to have CPUID. (Thanks to Herbert Oppmann)
*/
static int __cpuinit deep_magic_nexgen_probe(void)
{
int ret;
__asm__ __volatile__ (
" movw $0x5555, %%ax\n"
" xorw %%dx,%%dx\n"
" movw $2, %%cx\n"
" divw %%cx\n"
" movl $0, %%eax\n"
" jnz 1f\n"
" movl $1, %%eax\n"
"1:\n"
: "=a" (ret) : : "cx", "dx");
return ret;
}
static void __cpuinit init_nexgen(struct cpuinfo_x86 *c)
{
c->x86_cache_size = 256; /* A few had 1 MB... */
}
static void __cpuinit nexgen_identify(struct cpuinfo_x86 *c)
{
/* Detect NexGen with old hypercode */
if (deep_magic_nexgen_probe())
strcpy(c->x86_vendor_id, "NexGenDriven");
}
static struct cpu_dev nexgen_cpu_dev __cpuinitdata = {
.c_vendor = "Nexgen",
.c_ident = { "NexGenDriven" },
.c_models = {
{ .vendor = X86_VENDOR_NEXGEN,
.family = 5,
.model_names = { [1] = "Nx586" }
},
},
.c_init = init_nexgen,
.c_identify = nexgen_identify,
};
int __init nexgen_init_cpu(void)
{
cpu_devs[X86_VENDOR_NEXGEN] = &nexgen_cpu_dev;
return 0;
}
......@@ -614,16 +614,6 @@ static struct wd_ops intel_arch_wd_ops __read_mostly = {
.evntsel = MSR_ARCH_PERFMON_EVENTSEL1,
};
static struct wd_ops coreduo_wd_ops = {
.reserve = single_msr_reserve,
.unreserve = single_msr_unreserve,
.setup = setup_intel_arch_watchdog,
.rearm = p6_rearm,
.stop = single_msr_stop_watchdog,
.perfctr = MSR_ARCH_PERFMON_PERFCTR0,
.evntsel = MSR_ARCH_PERFMON_EVENTSEL0,
};
static void probe_nmi_watchdog(void)
{
switch (boot_cpu_data.x86_vendor) {
......@@ -637,8 +627,8 @@ static void probe_nmi_watchdog(void)
/* Work around Core Duo (Yonah) errata AE49 where perfctr1
doesn't have a working enable bit. */
if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) {
wd_ops = &coreduo_wd_ops;
break;
intel_arch_wd_ops.perfctr = MSR_ARCH_PERFMON_PERFCTR0;
intel_arch_wd_ops.evntsel = MSR_ARCH_PERFMON_EVENTSEL0;
}
if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
wd_ops = &intel_arch_wd_ops;
......
......@@ -51,7 +51,7 @@ void __init setup_apic_routing(void)
else
#endif
if (cpus_weight(cpu_possible_map) <= 8)
if (num_possible_cpus() <= 8)
genapic = &apic_flat;
else
genapic = &apic_physflat;
......
......@@ -22,6 +22,7 @@
#include <asm/sections.h>
#include <asm/kdebug.h>
#include <asm/e820.h>
#include <asm/bios_ebda.h>
static void __init zap_identity_mappings(void)
{
......@@ -49,7 +50,6 @@ static void __init copy_bootdata(char *real_mode_data)
}
}
#define BIOS_EBDA_SEGMENT 0x40E
#define BIOS_LOWMEM_KILOBYTES 0x413
/*
......@@ -80,8 +80,7 @@ static void __init reserve_ebda_region(void)
lowmem <<= 10;
/* start of EBDA area */
ebda_addr = *(unsigned short *)__va(BIOS_EBDA_SEGMENT);
ebda_addr <<= 4;
ebda_addr = get_bios_ebda();
/* Fixup: bios puts an EBDA in the top 64K segment */
/* of conventional memory, but does not adjust lowmem. */
......
......@@ -218,7 +218,7 @@ static void hpet_legacy_clockevent_register(void)
hpet_freq = 1000000000000000ULL;
do_div(hpet_freq, hpet_period);
hpet_clockevent.mult = div_sc((unsigned long) hpet_freq,
NSEC_PER_SEC, 32);
NSEC_PER_SEC, hpet_clockevent.shift);
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
......
......@@ -115,7 +115,8 @@ void __init setup_pit_timer(void)
* IO_APIC has been initialized.
*/
pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id());
pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32);
pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
pit_clockevent.shift);
pit_clockevent.max_delta_ns =
clockevent_delta2ns(0x7FFF, &pit_clockevent);
pit_clockevent.min_delta_ns =
......@@ -224,7 +225,8 @@ static int __init init_pit_clocksource(void)
pit_clockevent.mode != CLOCK_EVT_MODE_PERIODIC)
return 0;
clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE,
clocksource_pit.shift);
return clocksource_register(&clocksource_pit);
}
arch_initcall(init_pit_clocksource);
......
......@@ -2068,7 +2068,7 @@ static void __init setup_nmi(void)
* cycles as some i82489DX-based boards have glue logic that keeps the
* 8259A interrupt line asserted until INTA. --macro
*/
static inline void unlock_ExtINT_logic(void)
static inline void __init unlock_ExtINT_logic(void)
{
int apic, pin, i;
struct IO_APIC_route_entry entry0, entry1;
......
......@@ -1599,7 +1599,7 @@ static void __init setup_nmi(void)
* cycles as some i82489DX-based boards have glue logic that keeps the
* 8259A interrupt line asserted until INTA. --macro
*/
static inline void unlock_ExtINT_logic(void)
static inline void __init unlock_ExtINT_logic(void)
{
int apic, pin, i;
struct IO_APIC_route_entry entry0, entry1;
......
......@@ -134,7 +134,7 @@ unsigned int do_IRQ(struct pt_regs *regs)
: "=a" (arg1), "=d" (arg2), "=b" (bx)
: "0" (irq), "1" (desc), "2" (isp),
"D" (desc->handle_irq)
: "memory", "cc"
: "memory", "cc", "ecx"
);
} else
#endif
......
......@@ -364,7 +364,8 @@ int __init mfgpt_timer_setup(void)
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
/* Set up the clock event */
mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32);
mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
mfgpt_clockevent.shift);
mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
&mfgpt_clockevent);
mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
......
......@@ -686,13 +686,11 @@ void __init get_smp_config(void)
static int __init smp_scan_config(unsigned long base, unsigned long length,
unsigned reserve)
{
extern void __bad_mpf_size(void);
unsigned int *bp = phys_to_virt(base);
struct intel_mp_floating *mpf;
Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length);
if (sizeof(*mpf) != 16)
__bad_mpf_size();
BUILD_BUG_ON(sizeof(*mpf) != 16);
while (length > 0) {
mpf = (struct intel_mp_floating *)bp;
......@@ -801,7 +799,6 @@ void __init find_smp_config(void)
#ifdef CONFIG_X86_IO_APIC
#define MP_ISA_BUS 0
#define MP_MAX_IOAPIC_PIN 127
extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
......@@ -820,7 +817,7 @@ static int mp_find_ioapic(int gsi)
return -1;
}
static u8 uniq_ioapic_id(u8 id)
static u8 __init uniq_ioapic_id(u8 id)
{
#ifdef CONFIG_X86_32
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
......@@ -909,14 +906,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
intsrc.mpc_dstirq = pin; /* INTIN# */
Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
mp_irqs[mp_irq_entries] = intsrc;
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
MP_intsrc_info(&intsrc);
}
int es7000_plat;
......@@ -985,23 +975,14 @@ void __init mp_config_acpi_legacy_irqs(void)
intsrc.mpc_srcbusirq = i; /* Identity mapped */
intsrc.mpc_dstirq = i;
Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
"%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
intsrc.mpc_dstirq);
mp_irqs[mp_irq_entries] = intsrc;
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
MP_intsrc_info(&intsrc);
}
}
int mp_register_gsi(u32 gsi, int triggering, int polarity)
{
int ioapic = -1;
int ioapic_pin = 0;
int idx, bit = 0;
int ioapic;
int ioapic_pin;
#ifdef CONFIG_X86_32
#define MAX_GSI_NUM 4096
#define IRQ_COMPRESSION_START 64
......@@ -1041,15 +1022,13 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
* with redundant pin->gsi mappings (but unique PCI devices);
* we only program the IOAPIC on the first.
*/
bit = ioapic_pin % 32;
idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
if (idx > 3) {
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
"%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
ioapic_pin);
return gsi;
}
if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
#ifdef CONFIG_X86_32
......@@ -1059,7 +1038,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
#endif
}
mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit);
set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
#ifdef CONFIG_X86_32
/*
* For GSI >= 64, use IRQ compression
......
......@@ -43,6 +43,7 @@
#include <asm/system.h>
#include <asm/dma.h>
#include <asm/rio.h>
#include <asm/bios_ebda.h>
#ifdef CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT
int use_calgary __read_mostly = 1;
......
......@@ -1207,96 +1207,15 @@ static int genregs32_set(struct task_struct *target,
return ret;
}
static long ptrace32_siginfo(unsigned request, u32 pid, u32 addr, u32 data)
long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t caddr, compat_ulong_t cdata)
{
siginfo_t __user *si = compat_alloc_user_space(sizeof(siginfo_t));
compat_siginfo_t __user *si32 = compat_ptr(data);
siginfo_t ssi;
int ret;
if (request == PTRACE_SETSIGINFO) {
memset(&ssi, 0, sizeof(siginfo_t));
ret = copy_siginfo_from_user32(&ssi, si32);
if (ret)
return ret;
if (copy_to_user(si, &ssi, sizeof(siginfo_t)))
return -EFAULT;
}
ret = sys_ptrace(request, pid, addr, (unsigned long)si);
if (ret)
return ret;
if (request == PTRACE_GETSIGINFO) {
if (copy_from_user(&ssi, si, sizeof(siginfo_t)))
return -EFAULT;
ret = copy_siginfo_to_user32(si32, &ssi);
}
return ret;
}
asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data)
{
struct task_struct *child;
struct pt_regs *childregs;
unsigned long addr = caddr;
unsigned long data = cdata;
void __user *datap = compat_ptr(data);
int ret;
__u32 val;
switch (request) {
case PTRACE_TRACEME:
case PTRACE_ATTACH:
case PTRACE_KILL:
case PTRACE_CONT:
case PTRACE_SINGLESTEP:
case PTRACE_SINGLEBLOCK:
case PTRACE_DETACH:
case PTRACE_SYSCALL:
case PTRACE_OLDSETOPTIONS:
case PTRACE_SETOPTIONS:
case PTRACE_SET_THREAD_AREA:
case PTRACE_GET_THREAD_AREA:
#ifdef X86_BTS
case PTRACE_BTS_CONFIG:
case PTRACE_BTS_STATUS:
case PTRACE_BTS_SIZE:
case PTRACE_BTS_GET:
case PTRACE_BTS_CLEAR:
case PTRACE_BTS_DRAIN:
#endif
return sys_ptrace(request, pid, addr, data);
default:
return -EINVAL;
case PTRACE_PEEKTEXT:
case PTRACE_PEEKDATA:
case PTRACE_POKEDATA:
case PTRACE_POKETEXT:
case PTRACE_POKEUSR:
case PTRACE_PEEKUSR:
case PTRACE_GETREGS:
case PTRACE_SETREGS:
case PTRACE_SETFPREGS:
case PTRACE_GETFPREGS:
case PTRACE_SETFPXREGS:
case PTRACE_GETFPXREGS:
case PTRACE_GETEVENTMSG:
break;
case PTRACE_SETSIGINFO:
case PTRACE_GETSIGINFO:
return ptrace32_siginfo(request, pid, addr, data);
}
child = ptrace_get_task_struct(pid);
if (IS_ERR(child))
return PTR_ERR(child);
ret = ptrace_check_attach(child, request == PTRACE_KILL);
if (ret < 0)
goto out;
childregs = task_pt_regs(child);
switch (request) {
case PTRACE_PEEKUSR:
ret = getreg32(child, addr, &val);
......@@ -1343,12 +1262,14 @@ asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data)
sizeof(struct user32_fxsr_struct),
datap);
case PTRACE_GET_THREAD_AREA:
case PTRACE_SET_THREAD_AREA:
return arch_ptrace(child, request, addr, data);
default:
return compat_ptrace_request(child, request, addr, data);
}
out:
put_task_struct(child);
return ret;
}
......
......@@ -389,7 +389,6 @@ unsigned long __init find_max_low_pfn(void)
return max_low_pfn;
}
#define BIOS_EBDA_SEGMENT 0x40E
#define BIOS_LOWMEM_KILOBYTES 0x413
/*
......@@ -420,8 +419,7 @@ static void __init reserve_ebda_region(void)
lowmem <<= 10;
/* start of EBDA area */
ebda_addr = *(unsigned short *)__va(BIOS_EBDA_SEGMENT);
ebda_addr <<= 4;
ebda_addr = get_bios_ebda();
/* Fixup: bios puts an EBDA in the top 64K segment */
/* of conventional memory, but does not adjust lowmem. */
......
......@@ -116,7 +116,7 @@ extern int root_mountflags;
char __initdata command_line[COMMAND_LINE_SIZE];
struct resource standard_io_resources[] = {
static struct resource standard_io_resources[] = {
{ .name = "dma1", .start = 0x00, .end = 0x1f,
.flags = IORESOURCE_BUSY | IORESOURCE_IO },
{ .name = "pic1", .start = 0x20, .end = 0x21,
......
......@@ -413,16 +413,6 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
regs->ss = __USER_DS;
regs->cs = __USER_CS;
/*
* Clear TF when entering the signal handler, but
* notify any tracer that was single-stepping it.
* The tracer may want to single-step inside the
* handler too.
*/
regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
return 0;
give_sigsegv:
......@@ -501,16 +491,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
regs->ss = __USER_DS;
regs->cs = __USER_CS;
/*
* Clear TF when entering the signal handler, but
* notify any tracer that was single-stepping it.
* The tracer may want to single-step inside the
* handler too.
*/
regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
return 0;
give_sigsegv:
......@@ -566,6 +546,21 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
if (ret)
return ret;
/*
* Clear the direction flag as per the ABI for function entry.
*/
regs->flags &= ~X86_EFLAGS_DF;
/*
* Clear TF when entering the signal handler, but
* notify any tracer that was single-stepping it.
* The tracer may want to single-step inside the
* handler too.
*/
regs->flags &= ~X86_EFLAGS_TF;
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
......
......@@ -285,14 +285,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
even if the handler happens to be interrupting 32-bit code. */
regs->cs = __USER_CS;
/* This, by contrast, has nothing to do with segment registers -
see include/asm-x86_64/uaccess.h for details. */
set_fs(USER_DS);
regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
return 0;
give_sigsegv:
......@@ -380,6 +372,28 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
ret = setup_rt_frame(sig, ka, info, oldset, regs);
if (ret == 0) {
/*
* This has nothing to do with segment registers,
* despite the name. This magic affects uaccess.h
* macros' behavior. Reset it to the normal setting.
*/
set_fs(USER_DS);
/*
* Clear the direction flag as per the ABI for function entry.
*/
regs->flags &= ~X86_EFLAGS_DF;
/*
* Clear TF when entering the signal handler, but
* notify any tracer that was single-stepping it.
* The tracer may want to single-step inside the
* handler too.
*/
regs->flags &= ~X86_EFLAGS_TF;
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
......
......@@ -1058,7 +1058,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
check_tsc_sync_source(cpu);
local_irq_restore(flags);
while (!cpu_isset(cpu, cpu_online_map)) {
while (!cpu_online(cpu)) {
cpu_relax();
touch_nmi_watchdog();
}
......@@ -1168,7 +1168,7 @@ static void __init smp_cpu_index_default(void)
int i;
struct cpuinfo_x86 *c;
for_each_cpu_mask(i, cpu_possible_map) {
for_each_possible_cpu(i) {
c = &cpu_data(i);
/* mark all to hotplug */
c->cpu_index = NR_CPUS;
......
......@@ -29,6 +29,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/bios_ebda.h>
#include <asm/mach-summit/mach_mpparse.h>
static struct rio_table_hdr *rio_table_hdr __initdata;
......@@ -140,8 +141,8 @@ void __init setup_summit(void)
int i, next_wpeg, next_bus = 0;
/* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
ptr = *(unsigned short *)phys_to_virt(0x40Eul);
ptr = (unsigned long)phys_to_virt(ptr << 4);
ptr = get_bios_ebda();
ptr = (unsigned long)phys_to_virt(ptr);
rio_table_hdr = NULL;
offset = 0x180;
......
......@@ -195,9 +195,9 @@ static int __cpuinit init_smp_flush(void)
{
int i;
for_each_cpu_mask(i, cpu_possible_map) {
for_each_possible_cpu(i)
spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock);
}
return 0;
}
core_initcall(init_smp_flush);
......
......@@ -33,7 +33,7 @@
/* We can free up trampoline after bootup if cpu hotplug is not supported. */
#ifndef CONFIG_HOTPLUG_CPU
.section ".init.data","aw",@progbits
.section ".cpuinit.data","aw",@progbits
#else
.section .rodata,"a",@progbits
#endif
......
......@@ -602,7 +602,7 @@ DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0)
DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0, 1)
DO_ERROR_INFO(32, SIGILL, "iret exception", iret_error, ILL_BADSTK, 0, 1)
void __kprobes do_general_protection(struct pt_regs *regs, long error_code)
{
......
......@@ -113,7 +113,7 @@ static inline void send_QIC_CPI(__u32 cpuset, __u8 cpi)
for_each_online_cpu(cpu) {
if (cpuset & (1 << cpu)) {
#ifdef VOYAGER_DEBUG
if (!cpu_isset(cpu, cpu_online_map))
if (!cpu_online(cpu))
VDEBUG(("CPU%d sending cpi %d to CPU%d not in "
"cpu_online_map\n",
hard_smp_processor_id(), cpi, cpu));
......@@ -683,9 +683,9 @@ void __init smp_boot_cpus(void)
* Code added from smpboot.c */
{
unsigned long bogosum = 0;
for (i = 0; i < NR_CPUS; i++)
if (cpu_isset(i, cpu_online_map))
bogosum += cpu_data(i).loops_per_jiffy;
for_each_online_cpu(i)
bogosum += cpu_data(i).loops_per_jiffy;
printk(KERN_INFO "Total of %d processors activated "
"(%lu.%02lu BogoMIPS).\n",
cpucount + 1, bogosum / (500000 / HZ),
......@@ -1838,7 +1838,7 @@ static int __cpuinit voyager_cpu_up(unsigned int cpu)
return -EIO;
/* Unleash the CPU! */
cpu_set(cpu, smp_commenced_mask);
while (!cpu_isset(cpu, cpu_online_map))
while (!cpu_online(cpu))
mb();
return 0;
}
......
......@@ -566,9 +566,9 @@ void __init paging_init(void)
/*
* Test if the WP bit works in supervisor mode. It isn't supported on 386's
* and also on some strange 486's (NexGen etc.). All 586+'s are OK. This
* used to involve black magic jumps to work around some nasty CPU bugs,
* but fortunately the switch to using exceptions got rid of all that.
* and also on some strange 486's. All 586+'s are OK. This used to involve
* black magic jumps to work around some nasty CPU bugs, but fortunately the
* switch to using exceptions got rid of all that.
*/
static void __init test_wp_bit(void)
{
......
......@@ -193,7 +193,7 @@ void __init xen_smp_prepare_cpus(unsigned int max_cpus)
/* Restrict the possible_map according to max_cpus. */
while ((num_possible_cpus() > 1) && (num_possible_cpus() > max_cpus)) {
for (cpu = NR_CPUS-1; !cpu_isset(cpu, cpu_possible_map); cpu--)
for (cpu = NR_CPUS - 1; !cpu_possible(cpu); cpu--)
continue;
cpu_clear(cpu, cpu_possible_map);
}
......
#ifndef _MACH_BIOS_EBDA_H
#define _MACH_BIOS_EBDA_H
#include <asm/io.h>
/*
* there is a real-mode segmented pointer pointing to the
* 4K EBDA area at 0x40E.
......
#ifndef __ASM_IO_APIC_H
#define __ASM_IO_APIC_H
#include <asm/types.h>
#include <linux/types.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
......@@ -110,11 +110,13 @@ extern int nr_ioapic_registers[MAX_IO_APICS];
* MP-BIOS irq configuration table structures:
*/
#define MP_MAX_IOAPIC_PIN 127
struct mp_ioapic_routing {
int apic_id;
int gsi_base;
int gsi_end;
u32 pin_programmed[4];
DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
};
/* I/O APIC entries */
......
......@@ -33,7 +33,7 @@ static inline void smpboot_restore_warm_reset_vector(void)
*((volatile long *) phys_to_virt(0x467)) = 0;
}
static inline void smpboot_setup_io_apic(void)
static inline void __init smpboot_setup_io_apic(void)
{
/*
* Here we can be sure that there is an IO-APIC in the system. Let's
......
......@@ -198,16 +198,16 @@ do { \
*/
#define update_mmu_cache(vma, address, pte) do { } while (0)
void native_pagetable_setup_start(pgd_t *base);
void native_pagetable_setup_done(pgd_t *base);
extern void native_pagetable_setup_start(pgd_t *base);
extern void native_pagetable_setup_done(pgd_t *base);
#ifndef CONFIG_PARAVIRT
static inline void paravirt_pagetable_setup_start(pgd_t *base)
static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
{
native_pagetable_setup_start(base);
}
static inline void paravirt_pagetable_setup_done(pgd_t *base)
static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
{
native_pagetable_setup_done(base);
}
......
#ifdef __KERNEL__
# if defined(CONFIG_X86_32) || defined(__i386__)
# ifdef CONFIG_X86_32
# include "posix_types_32.h"
# else
# include "posix_types_64.h"
# endif
#else
# ifdef __i386__
# include "posix_types_32.h"
# else
# include "posix_types_64.h"
......
......@@ -118,7 +118,6 @@ struct cpuinfo_x86 {
#define X86_VENDOR_CYRIX 1
#define X86_VENDOR_AMD 2
#define X86_VENDOR_UMC 3
#define X86_VENDOR_NEXGEN 4
#define X86_VENDOR_CENTAUR 5
#define X86_VENDOR_TRANSMETA 7
#define X86_VENDOR_NSC 8
......
......@@ -231,6 +231,8 @@ extern int do_get_thread_area(struct task_struct *p, int idx,
extern int do_set_thread_area(struct task_struct *p, int idx,
struct user_desc __user *info, int can_allocate);
#define __ARCH_WANT_COMPAT_SYS_PTRACE
#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
......
......@@ -60,15 +60,4 @@ enum {
ALT_CALGARY = 5, /* Second Planar Calgary */
};
/*
* there is a real-mode segmented pointer pointing to the
* 4K EBDA area at 0x40E.
*/
static inline unsigned long get_bios_ebda(void)
{
unsigned long address = *(unsigned short *)phys_to_virt(0x40EUL);
address <<= 4;
return address;
}
#endif /* __ASM_RIO_H */
#ifdef __KERNEL__
# if defined(CONFIG_X86_32) || defined(__i386__)
# ifdef CONFIG_X86_32
# include "unistd_32.h"
# else
# include "unistd_64.h"
# endif
#else
# ifdef __i386__
# include "unistd_32.h"
# else
# include "unistd_64.h"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册