提交 b64c05e7 编写于 作者: G Grant Grundler 提交者: Greg Kroah-Hartman

[PATCH] PCI: clean up msi.c a bit

Clean up: move assignments outside of if() statements.
AFAICT, no functional change. Easier to read/understand.

Depends on "[PATCH 1/3] msi vector targeting abstractions"
by Mark Maule <maule@sgi.com>.
I expect one hunk to fail if applied against 2.6.15.

This is essentially Joe Perches' patch.
I've cleaned up the one instance added by Mark's patch.
Signed-off-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 b0e6e962
......@@ -103,9 +103,9 @@ static void set_msi_affinity(unsigned int vector, cpumask_t cpu_mask)
switch (entry->msi_attrib.type) {
case PCI_CAP_ID_MSI:
{
int pos;
int pos = pci_find_capability(entry->dev, PCI_CAP_ID_MSI);
if (!(pos = pci_find_capability(entry->dev, PCI_CAP_ID_MSI)))
if (!pos)
return;
pci_read_config_dword(entry->dev, msi_lower_address_reg(pos),
......@@ -347,9 +347,9 @@ static int assign_msi_vector(void)
static int get_new_vector(void)
{
int vector;
int vector = assign_msi_vector();
if ((vector = assign_msi_vector()) > 0)
if (vector > 0)
set_intr_gate(vector, interrupt[vector]);
return vector;
......@@ -369,7 +369,8 @@ static int msi_init(void)
return status;
}
if ((status = msi_cache_init()) < 0) {
status = msi_cache_init();
if (status < 0) {
pci_msi_enable = 0;
printk(KERN_WARNING "PCI: MSI cache init failed\n");
return status;
......@@ -523,10 +524,12 @@ static int msi_capability_init(struct pci_dev *dev)
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
pci_read_config_word(dev, msi_control_reg(pos), &control);
/* MSI Entry Initialization */
if (!(entry = alloc_msi_entry()))
entry = alloc_msi_entry();
if (!entry)
return -ENOMEM;
if ((vector = get_msi_vector(dev)) < 0) {
vector = get_msi_vector(dev);
if (vector < 0) {
kmem_cache_free(msi_cachep, entry);
return -EBUSY;
}
......@@ -620,7 +623,8 @@ static int msix_capability_init(struct pci_dev *dev,
entry = alloc_msi_entry();
if (!entry)
break;
if ((vector = get_msi_vector(dev)) < 0)
vector = get_msi_vector(dev);
if (vector < 0)
break;
j = entries[i].entry;
......@@ -701,10 +705,12 @@ int pci_enable_msi(struct pci_dev* dev)
temp = dev->irq;
if ((status = msi_init()) < 0)
status = msi_init();
if (status < 0)
return status;
if (!(pos = pci_find_capability(dev, PCI_CAP_ID_MSI)))
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
if (!pos)
return -EINVAL;
pci_read_config_word(dev, msi_control_reg(pos), &control);
......@@ -728,8 +734,8 @@ int pci_enable_msi(struct pci_dev* dev)
dev->irq = temp;
}
/* Check whether driver already requested for MSI-X vectors */
if ((pos = pci_find_capability(dev, PCI_CAP_ID_MSIX)) > 0 &&
!msi_lookup_vector(dev, PCI_CAP_ID_MSIX)) {
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
if (pos > 0 && !msi_lookup_vector(dev, PCI_CAP_ID_MSIX)) {
printk(KERN_INFO "PCI: %s: Can't enable MSI. "
"Device already has MSI-X vectors assigned\n",
pci_name(dev));
......@@ -755,7 +761,10 @@ void pci_disable_msi(struct pci_dev* dev)
u16 control;
unsigned long flags;
if (!dev || !(pos = pci_find_capability(dev, PCI_CAP_ID_MSI)))
if (!dev)
return;
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
if (!pos)
return;
pci_read_config_word(dev, msi_control_reg(pos), &control);
......@@ -924,10 +933,12 @@ int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
if (!pci_msi_enable || !dev || !entries)
return -EINVAL;
if ((status = msi_init()) < 0)
status = msi_init();
if (status < 0)
return status;
if (!(pos = pci_find_capability(dev, PCI_CAP_ID_MSIX)))
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
if (!pos)
return -EINVAL;
pci_read_config_word(dev, msi_control_reg(pos), &control);
......@@ -1006,7 +1017,11 @@ void pci_disable_msix(struct pci_dev* dev)
int pos, temp;
u16 control;
if (!dev || !(pos = pci_find_capability(dev, PCI_CAP_ID_MSIX)))
if (!dev)
return;
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
if (!pos)
return;
pci_read_config_word(dev, msi_control_reg(pos), &control);
......@@ -1066,8 +1081,8 @@ void msi_remove_pci_irq_vectors(struct pci_dev* dev)
return;
temp = dev->irq; /* Save IOAPIC IRQ */
if ((pos = pci_find_capability(dev, PCI_CAP_ID_MSI)) > 0 &&
!msi_lookup_vector(dev, PCI_CAP_ID_MSI)) {
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
if (pos > 0 && !msi_lookup_vector(dev, PCI_CAP_ID_MSI)) {
spin_lock_irqsave(&msi_lock, flags);
state = msi_desc[dev->irq]->msi_attrib.state;
spin_unlock_irqrestore(&msi_lock, flags);
......@@ -1080,8 +1095,8 @@ void msi_remove_pci_irq_vectors(struct pci_dev* dev)
msi_free_vector(dev, dev->irq, 0);
dev->irq = temp; /* Restore IOAPIC IRQ */
}
if ((pos = pci_find_capability(dev, PCI_CAP_ID_MSIX)) > 0 &&
!msi_lookup_vector(dev, PCI_CAP_ID_MSIX)) {
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
if (pos > 0 && !msi_lookup_vector(dev, PCI_CAP_ID_MSIX)) {
int vector, head, tail = 0, warning = 0;
void __iomem *base = NULL;
......
......@@ -495,9 +495,8 @@ pci_enable_device_bars(struct pci_dev *dev, int bars)
int
pci_enable_device(struct pci_dev *dev)
{
int err;
if ((err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1)))
int err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
if (err)
return err;
pci_fixup_device(pci_fixup_enable, dev);
dev->is_enabled = 1;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册