提交 b45d9147 编写于 作者: L Lennert Buytenhek 提交者: Dale Farnsworth

mv643xx_eth: Remove unused register defines

Most of the register defines in drivers/net/mv643xx_eth.h aren't
used at all.  Nuke them -- we can always re-add them if/when we
need them, and meanwhile, they unnecessarily clutter up the
header file.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NTzachi Perelstein <tzachi@marvell.com>
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
上级 5688fe87
......@@ -57,115 +57,28 @@
*/
#define PHY_ADDR_REG 0x0000
#define SMI_REG 0x0004
#define UNIT_DEFAULT_ADDR_REG 0x0008
#define UNIT_DEFAULTID_REG 0x000c
#define UNIT_INTERRUPT_CAUSE_REG 0x0080
#define UNIT_INTERRUPT_MASK_REG 0x0084
#define UNIT_INTERNAL_USE_REG 0x04fc
#define UNIT_ERROR_ADDR_REG 0x0094
#define BAR_0 0x0200
#define BAR_1 0x0208
#define BAR_2 0x0210
#define BAR_3 0x0218
#define BAR_4 0x0220
#define BAR_5 0x0228
#define SIZE_REG_0 0x0204
#define SIZE_REG_1 0x020c
#define SIZE_REG_2 0x0214
#define SIZE_REG_3 0x021c
#define SIZE_REG_4 0x0224
#define SIZE_REG_5 0x022c
#define HEADERS_RETARGET_BASE_REG 0x0230
#define HEADERS_RETARGET_CONTROL_REG 0x0234
#define HIGH_ADDR_REMAP_REG_0 0x0280
#define HIGH_ADDR_REMAP_REG_1 0x0284
#define HIGH_ADDR_REMAP_REG_2 0x0288
#define HIGH_ADDR_REMAP_REG_3 0x028c
#define BASE_ADDR_ENABLE_REG 0x0290
/*
* Per-port registers.
*/
#define ACCESS_PROTECTION_REG(p) (0x0294 + ((p) << 2))
#define PORT_CONFIG_REG(p) (0x0400 + ((p) << 10))
#define PORT_CONFIG_EXTEND_REG(p) (0x0404 + ((p) << 10))
#define MII_SERIAL_PARAMETRS_REG(p) (0x0408 + ((p) << 10))
#define GMII_SERIAL_PARAMETRS_REG(p) (0x040c + ((p) << 10))
#define VLAN_ETHERTYPE_REG(p) (0x0410 + ((p) << 10))
#define MAC_ADDR_LOW(p) (0x0414 + ((p) << 10))
#define MAC_ADDR_HIGH(p) (0x0418 + ((p) << 10))
#define SDMA_CONFIG_REG(p) (0x041c + ((p) << 10))
#define DSCP_0(p) (0x0420 + ((p) << 10))
#define DSCP_1(p) (0x0424 + ((p) << 10))
#define DSCP_2(p) (0x0428 + ((p) << 10))
#define DSCP_3(p) (0x042c + ((p) << 10))
#define DSCP_4(p) (0x0430 + ((p) << 10))
#define DSCP_5(p) (0x0434 + ((p) << 10))
#define DSCP_6(p) (0x0438 + ((p) << 10))
#define PORT_SERIAL_CONTROL_REG(p) (0x043c + ((p) << 10))
#define VLAN_PRIORITY_TAG_TO_PRIORITY(p) (0x0440 + ((p) << 10))
#define PORT_STATUS_REG(p) (0x0444 + ((p) << 10))
#define TRANSMIT_QUEUE_COMMAND_REG(p) (0x0448 + ((p) << 10))
#define TX_QUEUE_FIXED_PRIORITY(p) (0x044c + ((p) << 10))
#define PORT_TX_TOKEN_BUCKET_RATE_CONFIG(p) (0x0450 + ((p) << 10))
#define MAXIMUM_TRANSMIT_UNIT(p) (0x0458 + ((p) << 10))
#define PORT_MAXIMUM_TOKEN_BUCKET_SIZE(p) (0x045c + ((p) << 10))
#define INTERRUPT_CAUSE_REG(p) (0x0460 + ((p) << 10))
#define INTERRUPT_CAUSE_EXTEND_REG(p) (0x0464 + ((p) << 10))
#define INTERRUPT_MASK_REG(p) (0x0468 + ((p) << 10))
#define INTERRUPT_EXTEND_MASK_REG(p) (0x046c + ((p) << 10))
#define RX_FIFO_URGENT_THRESHOLD_REG(p) (0x0470 + ((p) << 10))
#define TX_FIFO_URGENT_THRESHOLD_REG(p) (0x0474 + ((p) << 10))
#define RX_MINIMAL_FRAME_SIZE_REG(p) (0x047c + ((p) << 10))
#define RX_DISCARDED_FRAMES_COUNTER(p) (0x0484 + ((p) << 10))
#define PORT_DEBUG_0_REG(p) (0x048c + ((p) << 10))
#define PORT_DEBUG_1_REG(p) (0x0490 + ((p) << 10))
#define PORT_INTERNAL_ADDR_ERROR_REG(p) (0x0494 + ((p) << 10))
#define INTERNAL_USE_REG(p) (0x04fc + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_0(p) (0x060c + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_1(p) (0x061c + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_2(p) (0x062c + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_3(p) (0x063c + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_4(p) (0x064c + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_5(p) (0x065c + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_6(p) (0x066c + ((p) << 10))
#define RX_CURRENT_QUEUE_DESC_PTR_7(p) (0x067c + ((p) << 10))
#define RECEIVE_QUEUE_COMMAND_REG(p) (0x0680 + ((p) << 10))
#define CURRENT_SERVED_TX_DESC_PTR(p) (0x0684 + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_0(p) (0x06c0 + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_1(p) (0x06c4 + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_2(p) (0x06c8 + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_3(p) (0x06cc + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_4(p) (0x06d0 + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_5(p) (0x06d4 + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_6(p) (0x06d8 + ((p) << 10))
#define TX_CURRENT_QUEUE_DESC_PTR_7(p) (0x06dc + ((p) << 10))
#define TX_QUEUE_0_TOKEN_BUCKET_COUNT(p) (0x0700 + ((p) << 10))
#define TX_QUEUE_0_TOKEN_BUCKET_CONFIG(p) (0x0704 + ((p) << 10))
#define TX_QUEUE_0_ARBITER_CONFIG(p) (0x0708 + ((p) << 10))
#define TX_QUEUE_1_TOKEN_BUCKET_COUNT(p) (0x0710 + ((p) << 10))
#define TX_QUEUE_1_TOKEN_BUCKET_CONFIG(p) (0x0714 + ((p) << 10))
#define TX_QUEUE_1_ARBITER_CONFIG(p) (0x0718 + ((p) << 10))
#define TX_QUEUE_2_TOKEN_BUCKET_COUNT(p) (0x0720 + ((p) << 10))
#define TX_QUEUE_2_TOKEN_BUCKET_CONFIG(p) (0x0724 + ((p) << 10))
#define TX_QUEUE_2_ARBITER_CONFIG(p) (0x0728 + ((p) << 10))
#define TX_QUEUE_3_TOKEN_BUCKET_COUNT(p) (0x0730 + ((p) << 10))
#define TX_QUEUE_3_TOKEN_BUCKET_CONFIG(p) (0x0734 + ((p) << 10))
#define TX_QUEUE_3_ARBITER_CONFIG(p) (0x0738 + ((p) << 10))
#define TX_QUEUE_4_TOKEN_BUCKET_COUNT(p) (0x0740 + ((p) << 10))
#define TX_QUEUE_4_TOKEN_BUCKET_CONFIG(p) (0x0744 + ((p) << 10))
#define TX_QUEUE_4_ARBITER_CONFIG(p) (0x0748 + ((p) << 10))
#define TX_QUEUE_5_TOKEN_BUCKET_COUNT(p) (0x0750 + ((p) << 10))
#define TX_QUEUE_5_TOKEN_BUCKET_CONFIG(p) (0x0754 + ((p) << 10))
#define TX_QUEUE_5_ARBITER_CONFIG(p) (0x0758 + ((p) << 10))
#define TX_QUEUE_6_TOKEN_BUCKET_COUNT(p) (0x0760 + ((p) << 10))
#define TX_QUEUE_6_TOKEN_BUCKET_CONFIG(p) (0x0764 + ((p) << 10))
#define TX_QUEUE_6_ARBITER_CONFIG(p) (0x0768 + ((p) << 10))
#define TX_QUEUE_7_TOKEN_BUCKET_COUNT(p) (0x0770 + ((p) << 10))
#define TX_QUEUE_7_TOKEN_BUCKET_CONFIG(p) (0x0774 + ((p) << 10))
#define TX_QUEUE_7_ARBITER_CONFIG(p) (0x0778 + ((p) << 10))
#define PORT_TX_TOKEN_BUCKET_COUNT(p) (0x0780 + ((p) << 10))
#define MIB_COUNTERS_BASE(p) (0x1000 + ((p) << 7))
#define DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(p) (0x1400 + ((p) << 10))
#define DA_FILTER_OTHER_MULTICAST_TABLE_BASE(p) (0x1500 + ((p) << 10))
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册