Merge branch 'next' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge

arch/powerpc/Kconfig

@@ -775,6 +775,7 @@ config LOWMEM_CAM_NUM_BOOL
 	  Say N here unless you know what you are doing.
 
 config LOWMEM_CAM_NUM
+	depends on FSL_BOOKE
 	int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
 	default 3
 

arch/powerpc/boot/dts/ksi8560.dts

@@ -57,14 +57,14 @@
 		bus-frequency = <0>;				/* Fixed by bootwrapper */
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;		/* 32 bytes */
 			cache-size = <0x40000>;			/* L2, 256K */

arch/powerpc/boot/dts/pq2fads.dts

@@ -17,6 +17,14 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -45,7 +53,7 @@
 		#size-cells = <1>;
 		reg = <0xf0010100 0x60>;
 
-		ranges = <0x0 0x0 0xfe000000 0x800000
+		ranges = <0x0 0x0 0xff800000 0x800000
 		          0x1 0x0 0xf4500000 0x8000
 		          0x8 0x0 0xf8200000 0x8000>;
 
@@ -71,7 +79,7 @@
 		};
 	};
 
-	pci@f0010800 {
+	pci0: pci@f0010800 {
 		device_type = "pci";
 		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
 		compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
@@ -142,7 +150,7 @@
 				reg = <0x119f0 0x10 0x115f0 0x10>;
 			};
 
-			serial@11a00 {
+			serial0: serial@11a00 {
 				device_type = "serial";
 				compatible = "fsl,mpc8280-scc-uart",
 				             "fsl,cpm2-scc-uart";
@@ -153,7 +161,7 @@
 				fsl,cpm-command = <0x800000>;
 			};
 
-			serial@11a20 {
+			serial1: serial@11a20 {
 				device_type = "serial";
 				compatible = "fsl,mpc8280-scc-uart",
 				             "fsl,cpm2-scc-uart";
@@ -164,7 +172,7 @@
 				fsl,cpm-command = <0x4a00000>;
 			};
 
-			ethernet@11320 {
+			enet0: ethernet@11320 {
 				device_type = "network";
 				compatible = "fsl,mpc8280-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
@@ -176,7 +184,7 @@
 				fsl,cpm-command = <0x16200300>;
 			};
 
-			ethernet@11340 {
+			enet1: ethernet@11340 {
 				device_type = "network";
 				compatible = "fsl,mpc8280-fcc-enet",
 				             "fsl,cpm2-fcc-enet";

arch/powerpc/boot/dts/sbc8548.dts

@@ -156,14 +156,14 @@
 		compatible = "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8548-memory-controller";
+			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8548-l2-cache-controller";
+			compatible = "fsl,mpc8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
 			cache-size = <0x80000>;	// L2, 512K

arch/powerpc/boot/dts/sbc8560.dts

@@ -61,14 +61,14 @@
 		clock-frequency = <0>;
 
 		memory-controller@2000 {
-			compatible = "fsl,8560-memory-controller";
+			compatible = "fsl,mpc8560-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8560-l2-cache-controller";
+			compatible = "fsl,mpc8560-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
 			cache-size = <0x40000>;		// L2, 256K

arch/powerpc/boot/dts/socrates.dts

@@ -52,6 +52,7 @@
 	soc8544@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
+		device_type = "soc";
 
 		ranges = <0x00000000 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00001000>;	// CCSRBAR 1M

arch/powerpc/boot/dts/stx_gp3_8560.dts

@@ -57,14 +57,14 @@
 		compatible = "fsl,mpc8560-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/tqm8540.dts

@@ -59,14 +59,14 @@
 		compatible = "fsl,mpc8540-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/tqm8541.dts

@@ -58,14 +58,14 @@
 		compatible = "fsl,mpc8541-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/tqm8555.dts

@@ -58,14 +58,14 @@
 		compatible = "fsl,mpc8555-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/tqm8560.dts

@@ -60,14 +60,14 @@
 		compatible = "fsl,mpc8560-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/include/asm/mpic.h

@@ -22,6 +22,14 @@
 #define MPIC_GREG_FEATURE_1		0x00010
 #define MPIC_GREG_GLOBAL_CONF_0		0x00020
 #define		MPIC_GREG_GCONF_RESET			0x80000000
+/* On the FSL mpic implementations the Mode field is expand to be
+ * 2 bits wide:
+ *	0b00 = pass through (interrupts routed to IRQ0)
+ *	0b01 = Mixed mode
+ *	0b10 = reserved
+ *	0b11 = External proxy / coreint
+ */
+#define		MPIC_GREG_GCONF_COREINT			0x60000000
 #define		MPIC_GREG_GCONF_8259_PTHROU_DIS		0x20000000
 #define		MPIC_GREG_GCONF_NO_BIAS			0x10000000
 #define		MPIC_GREG_GCONF_BASE_MASK		0x000fffff
@@ -357,6 +365,8 @@ struct mpic
 #define MPIC_BROKEN_FRR_NIRQS		0x00000800
 /* Destination only supports a single CPU at a time */
 #define MPIC_SINGLE_DEST_CPU		0x00001000
+/* Enable CoreInt delivery of interrupts */
+#define MPIC_ENABLE_COREINT		0x00002000
 
 /* MPIC HW modification ID */
 #define MPIC_REGSET_MASK		0xf0000000
@@ -470,6 +480,8 @@ extern void mpic_end_irq(unsigned int irq);
 extern unsigned int mpic_get_one_irq(struct mpic *mpic);
 /* This one gets from the primary mpic */
 extern unsigned int mpic_get_irq(void);
+/* This one gets from the primary mpic via CoreInt*/
+extern unsigned int mpic_get_coreint_irq(void);
 /* Fetch Machine Check interrupt from primary mpic */
 extern unsigned int mpic_get_mcirq(void);
 

arch/powerpc/include/asm/reg.h

@@ -143,6 +143,36 @@
 #define FPSCR_NI	0x00000004	/* FPU non IEEE-Mode */
 #define FPSCR_RN	0x00000003	/* FPU rounding control */
 
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH	0x80000000	/* Summary integer overflow high */
+#define SPEFSCR_OVH	0x40000000	/* Integer overflow high */
+#define SPEFSCR_FGH	0x20000000	/* Embedded FP guard bit high */
+#define SPEFSCR_FXH	0x10000000	/* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH	0x08000000	/* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH	0x04000000	/* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH	0x02000000	/* Embedded FP underflow high */
+#define SPEFSCR_FOVFH	0x01000000	/* Embedded FP overflow high */
+#define SPEFSCR_FINXS	0x00200000	/* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS	0x00100000	/* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS	0x00080000	/* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS	0x00040000	/* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS	0x00020000	/* Embedded FP overflow sticky */
+#define SPEFSCR_MODE	0x00010000	/* Embedded FP mode */
+#define SPEFSCR_SOV	0x00008000	/* Integer summary overflow */
+#define SPEFSCR_OV	0x00004000	/* Integer overflow */
+#define SPEFSCR_FG	0x00002000	/* Embedded FP guard bit */
+#define SPEFSCR_FX	0x00001000	/* Embedded FP sticky bit */
+#define SPEFSCR_FINV	0x00000800	/* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ	0x00000400	/* Embedded FP div by zero */
+#define SPEFSCR_FUNF	0x00000200	/* Embedded FP underflow */
+#define SPEFSCR_FOVF	0x00000100	/* Embedded FP overflow */
+#define SPEFSCR_FINXE	0x00000040	/* Embedded FP inexact enable */
+#define SPEFSCR_FINVE	0x00000020	/* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE	0x00000010	/* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE	0x00000008	/* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE	0x00000004	/* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 	0x00000003	/* Embedded FP rounding mode control */
+
 /* Special Purpose Registers (SPRNs)*/
 #define SPRN_CTR	0x009	/* Count Register */
 #define SPRN_DSCR	0x11

arch/powerpc/include/asm/reg_booke.h

@@ -423,36 +423,6 @@
 #define SGR_NORMAL	0		/* Speculative fetching allowed. */
 #define SGR_GUARDED	1		/* Speculative fetching disallowed. */
 
-/* Bit definitions for SPEFSCR. */
-#define SPEFSCR_SOVH	0x80000000	/* Summary integer overflow high */
-#define SPEFSCR_OVH	0x40000000	/* Integer overflow high */
-#define SPEFSCR_FGH	0x20000000	/* Embedded FP guard bit high */
-#define SPEFSCR_FXH	0x10000000	/* Embedded FP sticky bit high */
-#define SPEFSCR_FINVH	0x08000000	/* Embedded FP invalid operation high */
-#define SPEFSCR_FDBZH	0x04000000	/* Embedded FP div by zero high */
-#define SPEFSCR_FUNFH	0x02000000	/* Embedded FP underflow high */
-#define SPEFSCR_FOVFH	0x01000000	/* Embedded FP overflow high */
-#define SPEFSCR_FINXS	0x00200000	/* Embedded FP inexact sticky */
-#define SPEFSCR_FINVS	0x00100000	/* Embedded FP invalid op. sticky */
-#define SPEFSCR_FDBZS	0x00080000	/* Embedded FP div by zero sticky */
-#define SPEFSCR_FUNFS	0x00040000	/* Embedded FP underflow sticky */
-#define SPEFSCR_FOVFS	0x00020000	/* Embedded FP overflow sticky */
-#define SPEFSCR_MODE	0x00010000	/* Embedded FP mode */
-#define SPEFSCR_SOV	0x00008000	/* Integer summary overflow */
-#define SPEFSCR_OV	0x00004000	/* Integer overflow */
-#define SPEFSCR_FG	0x00002000	/* Embedded FP guard bit */
-#define SPEFSCR_FX	0x00001000	/* Embedded FP sticky bit */
-#define SPEFSCR_FINV	0x00000800	/* Embedded FP invalid operation */
-#define SPEFSCR_FDBZ	0x00000400	/* Embedded FP div by zero */
-#define SPEFSCR_FUNF	0x00000200	/* Embedded FP underflow */
-#define SPEFSCR_FOVF	0x00000100	/* Embedded FP overflow */
-#define SPEFSCR_FINXE	0x00000040	/* Embedded FP inexact enable */
-#define SPEFSCR_FINVE	0x00000020	/* Embedded FP invalid op. enable */
-#define SPEFSCR_FDBZE	0x00000010	/* Embedded FP div by zero enable */
-#define SPEFSCR_FUNFE	0x00000008	/* Embedded FP underflow enable */
-#define SPEFSCR_FOVFE	0x00000004	/* Embedded FP overflow enable */
-#define SPEFSCR_FRMC 	0x00000003	/* Embedded FP rounding mode control */
-
 /*
  * The IBM-403 is an even more odd special case, as it is much
  * older than the IBM-405 series.  We put these down here incase someone

arch/powerpc/include/asm/sfp-machine.h

@@ -29,9 +29,9 @@
 
 /* basic word size definitions */
 #define _FP_W_TYPE_SIZE		32
-#define _FP_W_TYPE		unsigned long
-#define _FP_WS_TYPE		signed long
-#define _FP_I_TYPE		long
+#define _FP_W_TYPE		unsigned int
+#define _FP_WS_TYPE		signed int
+#define _FP_I_TYPE		int
 
 #define __ll_B			((UWtype) 1 << (W_TYPE_SIZE / 2))
 #define __ll_lowpart(t)		((UWtype) (t) & (__ll_B - 1))

arch/powerpc/sysdev/mpic.c

@@ -1170,6 +1170,12 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 			mb();
 	}
 
+	/* CoreInt */
+	if (flags & MPIC_ENABLE_COREINT)
+		mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
+			   mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
+			   | MPIC_GREG_GCONF_COREINT);
+
 	if (flags & MPIC_ENABLE_MCK)
 		mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
 			   mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
@@ -1525,6 +1531,34 @@ unsigned int mpic_get_irq(void)
 	return mpic_get_one_irq(mpic);
 }
 
+unsigned int mpic_get_coreint_irq(void)
+{
+#ifdef CONFIG_BOOKE
+	struct mpic *mpic = mpic_primary;
+	u32 src;
+
+	BUG_ON(mpic == NULL);
+
+	src = mfspr(SPRN_EPR);
+
+	if (unlikely(src == mpic->spurious_vec)) {
+		if (mpic->flags & MPIC_SPV_EOI)
+			mpic_eoi(mpic);
+		return NO_IRQ;
+	}
+	if (unlikely(mpic->protected && test_bit(src, mpic->protected))) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "%s: Got protected source %d !\n",
+			       mpic->name, (int)src);
+		return NO_IRQ;
+	}
+
+	return irq_linear_revmap(mpic->irqhost, src);
+#else
+	return NO_IRQ;
+#endif
+}
+
 unsigned int mpic_get_mcirq(void)
 {
 	struct mpic *mpic = mpic_primary;

drivers/serial/cpm_uart/cpm_uart_core.c

@@ -1106,6 +1106,10 @@ static int cpm_uart_init_port(struct device_node *np,
 	for (i = 0; i < NUM_GPIOS; i++)
 		pinfo->gpios[i] = of_get_gpio(np, i);
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+	udbg_putc = NULL;
+#endif
+
 	return cpm_uart_request_port(&pinfo->port);
 
 out_pram:
@@ -1255,10 +1259,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 			baud = 9600;
 	}
 
-#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
-	udbg_putc = NULL;
-#endif
-
 	if (IS_SMC(pinfo)) {
 		out_be16(&pinfo->smcup->smc_brkcr, 0);
 		cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
@@ -1339,13 +1339,13 @@ static int __devinit cpm_uart_probe(struct of_device *ofdev,
 
 	dev_set_drvdata(&ofdev->dev, pinfo);
 
+	/* initialize the device pointer for the port */
+	pinfo->port.dev = &ofdev->dev;
+
 	ret = cpm_uart_init_port(ofdev->node, pinfo);
 	if (ret)
 		return ret;
 
-	/* initialize the device pointer for the port */
-	pinfo->port.dev = &ofdev->dev;
-
 	return uart_add_one_port(&cpm_reg, &pinfo->port);
 }
 

drivers/video/fsl-diu-fb.c

@@ -1352,14 +1352,15 @@ static int fsl_diu_resume(struct of_device *ofdev)
 #endif				/* CONFIG_PM */
 
 /* Align to 64-bit(8-byte), 32-byte, etc. */
-static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+static int allocate_buf(struct device *dev, struct diu_addr *buf, u32 size,
+			u32 bytes_align)
 {
 	u32 offset, ssize;
 	u32 mask;
 	dma_addr_t paddr = 0;
 
 	ssize = size + bytes_align;
-	buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA |
+	buf->vaddr = dma_alloc_coherent(dev, ssize, &paddr, GFP_DMA |
 							     __GFP_ZERO);
 	if (!buf->vaddr)
 		return -ENOMEM;
@@ -1376,9 +1377,10 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
 	return 0;
 }
 
-static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
+		     u32 bytes_align)
 {
-	dma_free_coherent(NULL, size + bytes_align,
+	dma_free_coherent(dev, size + bytes_align,
 				buf->vaddr, (buf->paddr - buf->offset));
 	return;
 }
@@ -1476,17 +1478,19 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 	machine_data->monitor_port = monitor_port;
 
 	/* Area descriptor memory pool aligns to 64-bit boundary */
-	if (allocate_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
+	if (allocate_buf(&ofdev->dev, &pool.ad,
+			 sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
 		return -ENOMEM;
 
 	/* Get memory for Gamma Table  - 32-byte aligned memory */
-	if (allocate_buf(&pool.gamma, 768, 32)) {
+	if (allocate_buf(&ofdev->dev, &pool.gamma, 768, 32)) {
 		ret = -ENOMEM;
 		goto error;
 	}
 
 	/* For performance, cursor bitmap buffer aligns to 32-byte boundary */
-	if (allocate_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32)) {
+	if (allocate_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+			 32)) {
 		ret = -ENOMEM;
 		goto error;
 	}
@@ -1554,11 +1558,13 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 		i > 0; i--)
 		uninstall_fb(machine_data->fsl_diu_info[i - 1]);
 	if (pool.ad.vaddr)
-		free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
+		free_buf(&ofdev->dev, &pool.ad,
+			 sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
 	if (pool.gamma.vaddr)
-		free_buf(&pool.gamma, 768, 32);
+		free_buf(&ofdev->dev, &pool.gamma, 768, 32);
 	if (pool.cursor.vaddr)
-		free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
+		free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+			 32);
 	if (machine_data->dummy_aoi_virt)
 		fsl_diu_free(machine_data->dummy_aoi_virt, 64);
 	iounmap(dr.diu_reg);
@@ -1584,11 +1590,13 @@ static int fsl_diu_remove(struct of_device *ofdev)
 	for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--)
 		uninstall_fb(machine_data->fsl_diu_info[i - 1]);
 	if (pool.ad.vaddr)
-		free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
+		free_buf(&ofdev->dev, &pool.ad,
+			 sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
 	if (pool.gamma.vaddr)
-		free_buf(&pool.gamma, 768, 32);
+		free_buf(&ofdev->dev, &pool.gamma, 768, 32);
 	if (pool.cursor.vaddr)
-		free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
+		free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+			 32);
 	if (machine_data->dummy_aoi_virt)
 		fsl_diu_free(machine_data->dummy_aoi_virt, 64);
 	iounmap(dr.diu_reg);

include/linux/fsl_devices.h

@@ -18,7 +18,6 @@
 #define _FSL_DEVICE_H_
 
 #include <linux/types.h>
-#include <linux/phy.h>
 
 /*
  * Some conventions on how we handle peripherals on Freescale chips
@@ -44,27 +43,6 @@
  *
  */
 
-struct gianfar_platform_data {
-	/* device specific information */
-	u32	device_flags;
-	char	bus_id[BUS_ID_SIZE];
-	phy_interface_t interface;
-};
-
-struct gianfar_mdio_data {
-	/* board specific information */
-	int	irq[32];
-};
-
-/* Flags in gianfar_platform_data */
-#define FSL_GIANFAR_BRD_HAS_PHY_INTR	0x00000001 /* set or use a timer */
-#define FSL_GIANFAR_BRD_IS_REDUCED	0x00000002 /* Set if RGMII, RMII */
-
-struct fsl_i2c_platform_data {
-	/* device specific information */
-	u32	device_flags;
-};
-
 /* Flags related to I2C device features */
 #define FSL_I2C_DEV_SEPARATE_DFSRR	0x00000001
 #define FSL_I2C_DEV_CLOCK_5200		0x00000002