提交 a410963b 编写于 作者: L Linus Torvalds

Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

Pull embedded i2c changes from Wolfram Sang:
 "Changes for the "embedded" part of the I2C subsystem:

   - lots of devicetree conversions of drivers (and preparations for
     that)
   - big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin
   - Rafael's struct dev_pm_ops conversion patches for I2C
   - usual driver cleanups and fixes

  All patches have been in linux-next for an apropriate time and all
  patches touching files outside of i2c-folders should have proper acks
  from the maintainers."

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits)
  Revert "i2c: tegra: convert normal suspend/resume to *_noirq"
  I2C: MV64XYZ: Add Device Tree support
  i2c: stu300: use devm managed resources
  i2c: i2c-ocores: support for 16bit and 32bit IO
  V4L/DVB: mfd: use reg_shift instead of regstep
  i2c: i2c-ocores: Use reg-shift property
  i2c: i2c-ocores: DT bindings and minor fixes.
  i2c: mv64xxxx: remove EXPERIMENTAL tag
  i2c-s3c2410: Use plain pm_runtime_put()
  i2c: s3c2410: Fix pointer type passed to of_match_node()
  i2c: mxs: Set I2C timing registers for mxs-i2c
  i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file.
  i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data.
  i2c:i2c-bfin-twi: include twi head file
  i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load.
  i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly.
  i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves.
  i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios".
  i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios.
  i2c-mv64xxxx: allow more than one driver instance
  ...

Conflicts:
	drivers/i2c/busses/i2c-nomadik.c
......@@ -4,6 +4,8 @@ Required properties:
- compatible: Should be "fsl,<chip>-i2c"
- reg: Should contain registers location and length
- interrupts: Should contain ERROR and DMA interrupts
- clock-frequency: Desired I2C bus clock frequency in Hz.
Only 100000Hz and 400000Hz modes are supported.
Examples:
......@@ -13,4 +15,5 @@ i2c0: i2c@80058000 {
compatible = "fsl,imx28-i2c";
reg = <0x80058000 2000>;
interrupts = <111 68>;
clock-frequency = <100000>;
};
Device tree configuration for i2c-ocores
Required properties:
- compatible : "opencores,i2c-ocores"
- reg : bus address start and address range size of device
- interrupts : interrupt number
- clock-frequency : frequency of bus clock in Hz
- #address-cells : should be <1>
- #size-cells : should be <0>
Optional properties:
- reg-shift : device register offsets are shifted by this value
- reg-io-width : io register width in bytes (1, 2 or 4)
- regstep : deprecated, use reg-shift above
Example:
i2c0: ocores@a0000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "opencores,i2c-ocores";
reg = <0xa0000000 0x8>;
interrupts = <10>;
clock-frequency = <20000000>;
reg-shift = <0>; /* 8 bit registers */
reg-io-width = <1>; /* 8 bit read/write */
dummy@60 {
compatible = "dummy";
reg = <0x60>;
};
};
* I2C
* Marvell MMP I2C controller
Required properties :
......@@ -32,3 +32,20 @@ Examples:
interrupts = <58>;
};
* Marvell MV64XXX I2C controller
Required properties :
- reg : Offset and length of the register set for the device
- compatible : Should be "marvell,mv64xxx-i2c"
- interrupts : The interrupt number
- clock-frequency : Desired I2C bus clock frequency in Hz.
Examples:
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
interrupts = <29>;
clock-frequency = <100000>;
};
......@@ -660,6 +660,7 @@
compatible = "fsl,imx28-i2c";
reg = <0x80058000 2000>;
interrupts = <111 68>;
clock-frequency = <100000>;
status = "disabled";
};
......@@ -669,6 +670,7 @@
compatible = "fsl,imx28-i2c";
reg = <0x8005a000 2000>;
interrupts = <110 69>;
clock-frequency = <100000>;
status = "disabled";
};
......
......@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
......@@ -40,7 +41,6 @@
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <plat/i2c.h>
#include <plat/ste_dma40.h>
#include <plat/gpio-nomadik.h>
......
......@@ -12,7 +12,7 @@
#include <linux/dma-mapping.h>
#include <linux/sys_soc.h>
#include <linux/amba/bus.h>
#include <plat/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
#include <mach/crypto-ux500.h>
struct spi_master_cntlr;
......@@ -56,27 +56,15 @@ dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
struct nmk_i2c_controller;
static inline struct platform_device *
static inline struct amba_device *
dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
struct nmk_i2c_controller *data)
{
struct resource res[] = {
DEFINE_RES_MEM(base, SZ_4K),
DEFINE_RES_IRQ(irq),
};
/* Conjure a name similar to what the platform device used to have */
char name[16];
struct platform_device_info pdevinfo = {
.parent = parent,
.name = "nmk-i2c",
.id = id,
.res = res,
.num_res = ARRAY_SIZE(res),
.data = data,
.size_data = sizeof(*data),
.dma_mask = DMA_BIT_MASK(32),
};
return platform_device_register_full(&pdevinfo);
snprintf(name, sizeof(name), "nmk-i2c.%d", id);
return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0);
}
static inline struct amba_device *
......
......@@ -15,7 +15,7 @@
*
**/
struct imxi2c_platform_data {
int bitrate;
u32 bitrate;
};
#endif /* __ASM_ARCH_I2C_H_ */
......@@ -462,7 +462,7 @@ config I2C_MPC
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL
depends on (MV64X60 || PLAT_ORION)
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
......@@ -483,10 +483,11 @@ config I2C_MXS
config I2C_NOMADIK
tristate "ST-Ericsson Nomadik/Ux500 I2C Controller"
depends on PLAT_NOMADIK
depends on ARM_AMBA
help
If you say yes to this option, support will be included for the
I2C interface from ST-Ericsson's Nomadik and Ux500 architectures.
I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
as well as the STA2X11 PCIe I/O HUB.
config I2C_NUC900
tristate "NUC900 I2C Driver"
......
......@@ -279,30 +279,31 @@ static int __devexit at91_i2c_remove(struct platform_device *pdev)
/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */
static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
static int at91_i2c_suspend(struct device *dev)
{
clk_disable(twi_clk);
return 0;
}
static int at91_i2c_resume(struct platform_device *pdev)
static int at91_i2c_resume(struct device *dev)
{
return clk_enable(twi_clk);
}
static SIMPLE_DEV_PM_OPS(at91_i2c_pm, at91_i2c_suspend, at91_i2c_resume);
#define AT91_I2C_PM (&at91_i2c_pm)
#else
#define at91_i2c_suspend NULL
#define at91_i2c_resume NULL
#define AT91_I2C_PM NULL
#endif
static struct platform_driver at91_i2c_driver = {
.probe = at91_i2c_probe,
.remove = __devexit_p(at91_i2c_remove),
.suspend = at91_i2c_suspend,
.resume = at91_i2c_resume,
.driver = {
.name = "at91_i2c",
.owner = THIS_MODULE,
.pm = AT91_I2C_PM,
},
};
......
......@@ -25,6 +25,7 @@
#include <asm/blackfin.h>
#include <asm/portmux.h>
#include <asm/irq.h>
#include <asm/bfin_twi.h>
/* SMBus mode*/
#define TWI_I2C_MODE_STANDARD 1
......@@ -32,56 +33,6 @@
#define TWI_I2C_MODE_COMBINED 3
#define TWI_I2C_MODE_REPEAT 4
struct bfin_twi_iface {
int irq;
spinlock_t lock;
char read_write;
u8 command;
u8 *transPtr;
int readNum;
int writeNum;
int cur_mode;
int manual_stop;
int result;
struct i2c_adapter adap;
struct completion complete;
struct i2c_msg *pmsg;
int msg_num;
int cur_msg;
u16 saved_clkdiv;
u16 saved_control;
void __iomem *regs_base;
};
#define DEFINE_TWI_REG(reg, off) \
static inline u16 read_##reg(struct bfin_twi_iface *iface) \
{ return bfin_read16(iface->regs_base + (off)); } \
static inline void write_##reg(struct bfin_twi_iface *iface, u16 v) \
{ bfin_write16(iface->regs_base + (off), v); }
DEFINE_TWI_REG(CLKDIV, 0x00)
DEFINE_TWI_REG(CONTROL, 0x04)
DEFINE_TWI_REG(SLAVE_CTL, 0x08)
DEFINE_TWI_REG(SLAVE_STAT, 0x0C)
DEFINE_TWI_REG(SLAVE_ADDR, 0x10)
DEFINE_TWI_REG(MASTER_CTL, 0x14)
DEFINE_TWI_REG(MASTER_STAT, 0x18)
DEFINE_TWI_REG(MASTER_ADDR, 0x1C)
DEFINE_TWI_REG(INT_STAT, 0x20)
DEFINE_TWI_REG(INT_MASK, 0x24)
DEFINE_TWI_REG(FIFO_CTL, 0x28)
DEFINE_TWI_REG(FIFO_STAT, 0x2C)
DEFINE_TWI_REG(XMT_DATA8, 0x80)
DEFINE_TWI_REG(XMT_DATA16, 0x84)
DEFINE_TWI_REG(RCV_DATA8, 0x88)
DEFINE_TWI_REG(RCV_DATA16, 0x8C)
static const u16 pin_req[2][3] = {
{P_TWI0_SCL, P_TWI0_SDA, 0},
{P_TWI1_SCL, P_TWI1_SDA, 0},
};
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
unsigned short twi_int_status)
{
......@@ -99,7 +50,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
*/
else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | MDIR | RSTART);
read_MASTER_CTL(iface) | MDIR);
else if (iface->manual_stop)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
......@@ -107,10 +58,10 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
iface->cur_msg + 1 < iface->msg_num) {
if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | RSTART | MDIR);
read_MASTER_CTL(iface) | MDIR);
else
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
read_MASTER_CTL(iface) & ~MDIR);
}
}
if (twi_int_status & RCVSERV) {
......@@ -130,17 +81,25 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
}
iface->transPtr++;
iface->readNum--;
} else if (iface->manual_stop) {
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg + 1 < iface->msg_num) {
if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | RSTART | MDIR);
else
}
if (iface->readNum == 0) {
if (iface->manual_stop) {
/* Temporary workaround to avoid possible bus stall -
* Flush FIFO before issuing the STOP condition
*/
read_RCV_DATA16(iface);
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
read_MASTER_CTL(iface) | STOP);
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg + 1 < iface->msg_num) {
if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | MDIR);
else
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~MDIR);
}
}
}
if (twi_int_status & MERR) {
......@@ -193,7 +152,8 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
return;
}
if (twi_int_status & MCOMP) {
if ((read_MASTER_CTL(iface) & MEN) == 0 &&
if (twi_int_status & (XMTSERV | RCVSERV) &&
(read_MASTER_CTL(iface) & MEN) == 0 &&
(iface->cur_mode == TWI_I2C_MODE_REPEAT ||
iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
iface->result = -1;
......@@ -221,7 +181,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg+1 < iface->msg_num) {
iface->cur_msg + 1 < iface->msg_num) {
iface->cur_msg++;
iface->transPtr = iface->pmsg[iface->cur_msg].buf;
iface->writeNum = iface->readNum =
......@@ -241,27 +201,29 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
}
}
if (iface->pmsg[iface->cur_msg].len <= 255)
write_MASTER_CTL(iface,
if (iface->pmsg[iface->cur_msg].len <= 255) {
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) &
(~(0xff << 6))) |
(iface->pmsg[iface->cur_msg].len << 6));
else {
(iface->pmsg[iface->cur_msg].len << 6));
iface->manual_stop = 0;
} else {
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) |
(0xff << 6)));
iface->manual_stop = 1;
}
/* remove restart bit and enable master receive */
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
/* remove restart bit before last message */
if (iface->cur_msg + 1 == iface->msg_num)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
} else {
iface->result = 1;
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
}
complete(&iface->complete);
}
complete(&iface->complete);
}
/* Interrupt handler */
......@@ -298,8 +260,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
while (read_MASTER_STAT(iface) & BUSBUSY)
yield();
if (read_MASTER_STAT(iface) & BUSBUSY)
return -EAGAIN;
iface->pmsg = msgs;
iface->msg_num = num;
......@@ -311,7 +273,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
return -EINVAL;
}
iface->cur_mode = TWI_I2C_MODE_REPEAT;
if (iface->msg_num > 1)
iface->cur_mode = TWI_I2C_MODE_REPEAT;
iface->manual_stop = 0;
iface->transPtr = pmsg->buf;
iface->writeNum = iface->readNum = pmsg->len;
......@@ -356,6 +319,7 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
(iface->msg_num > 1 ? RSTART : 0) |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
SSYNC();
......@@ -398,8 +362,8 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
while (read_MASTER_STAT(iface) & BUSBUSY)
yield();
if (read_MASTER_STAT(iface) & BUSBUSY)
return -EAGAIN;
iface->writeNum = 0;
iface->readNum = 0;
......@@ -520,7 +484,7 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
else
write_MASTER_CTL(iface, 0x1 << 6);
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
default:
......@@ -611,9 +575,9 @@ static struct i2c_algorithm bfin_twi_algorithm = {
.functionality = bfin_twi_functionality,
};
static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state)
static int i2c_bfin_twi_suspend(struct device *dev)
{
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
struct bfin_twi_iface *iface = dev_get_drvdata(dev);
iface->saved_clkdiv = read_CLKDIV(iface);
iface->saved_control = read_CONTROL(iface);
......@@ -626,14 +590,14 @@ static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state
return 0;
}
static int i2c_bfin_twi_resume(struct platform_device *pdev)
static int i2c_bfin_twi_resume(struct device *dev)
{
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
struct bfin_twi_iface *iface = dev_get_drvdata(dev);
int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
0, pdev->name, iface);
0, to_platform_device(dev)->name, iface);
if (rc) {
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
return -ENODEV;
}
......@@ -646,6 +610,9 @@ static int i2c_bfin_twi_resume(struct platform_device *pdev)
return 0;
}
static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
static int i2c_bfin_twi_probe(struct platform_device *pdev)
{
struct bfin_twi_iface *iface;
......@@ -695,7 +662,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
p_adap->timeout = 5 * HZ;
p_adap->retries = 3;
rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi");
rc = peripheral_request_list((unsigned short *)pdev->dev.platform_data,
"i2c-bfin-twi");
if (rc) {
dev_err(&pdev->dev, "Can't setup pin mux!\n");
goto out_error_pin_mux;
......@@ -742,7 +710,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
free_irq(iface->irq, iface);
out_error_req_irq:
out_error_no_irq:
peripheral_free_list(pin_req[pdev->id]);
peripheral_free_list((unsigned short *)pdev->dev.platform_data);
out_error_pin_mux:
iounmap(iface->regs_base);
out_error_ioremap:
......@@ -760,7 +728,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
i2c_del_adapter(&(iface->adap));
free_irq(iface->irq, iface);
peripheral_free_list(pin_req[pdev->id]);
peripheral_free_list((unsigned short *)pdev->dev.platform_data);
iounmap(iface->regs_base);
kfree(iface);
......@@ -770,11 +738,10 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
static struct platform_driver i2c_bfin_twi_driver = {
.probe = i2c_bfin_twi_probe,
.remove = i2c_bfin_twi_remove,
.suspend = i2c_bfin_twi_suspend,
.resume = i2c_bfin_twi_resume,
.driver = {
.name = "i2c-bfin-twi",
.owner = THIS_MODULE,
.pm = &i2c_bfin_twi_pm,
},
};
......
......@@ -117,10 +117,8 @@ static u16 __initdata i2c_clk_div[50][2] = {
struct imx_i2c_struct {
struct i2c_adapter adapter;
struct resource *res;
struct clk *clk;
void __iomem *base;
int irq;
wait_queue_head_t queue;
unsigned long i2csr;
unsigned int disable_delay;
......@@ -472,9 +470,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
struct pinctrl *pinctrl;
void __iomem *base;
resource_size_t res_size;
int irq, bitrate;
int ret;
int irq, ret;
u32 bitrate;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
......@@ -489,25 +486,15 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
return -ENOENT;
}
res_size = resource_size(res);
if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
dev_err(&pdev->dev, "request_mem_region failed\n");
base = devm_request_and_ioremap(&pdev->dev, res);
if (!base)
return -EBUSY;
}
base = ioremap(res->start, res_size);
if (!base) {
dev_err(&pdev->dev, "ioremap failed\n");
ret = -EIO;
goto fail1;
}
i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL);
i2c_imx = devm_kzalloc(&pdev->dev, sizeof(struct imx_i2c_struct),
GFP_KERNEL);
if (!i2c_imx) {
dev_err(&pdev->dev, "can't allocate interface\n");
ret = -ENOMEM;
goto fail2;
return -ENOMEM;
}
/* Setup i2c_imx driver structure */
......@@ -517,29 +504,27 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.dev.parent = &pdev->dev;
i2c_imx->adapter.nr = pdev->id;
i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
i2c_imx->irq = irq;
i2c_imx->base = base;
i2c_imx->res = res;
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
goto fail3;
dev_err(&pdev->dev, "can't get/select pinctrl\n");
return PTR_ERR(pinctrl);
}
/* Get I2C clock */
i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk");
i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c_imx->clk)) {
ret = PTR_ERR(i2c_imx->clk);
dev_err(&pdev->dev, "can't get I2C clock\n");
goto fail3;
return PTR_ERR(i2c_imx->clk);
}
/* Request IRQ */
ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx);
ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
pdev->name, i2c_imx);
if (ret) {
dev_err(&pdev->dev, "can't claim irq %d\n", i2c_imx->irq);
goto fail4;
dev_err(&pdev->dev, "can't claim irq %d\n", irq);
return ret;
}
/* Init queue */
......@@ -564,7 +549,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
if (ret < 0) {
dev_err(&pdev->dev, "registration failed\n");
goto fail5;
return ret;
}
of_i2c_register_devices(&i2c_imx->adapter);
......@@ -572,28 +557,16 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", i2c_imx->irq);
dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n",
i2c_imx->res->start, i2c_imx->res->end);
dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x \n",
res_size, i2c_imx->res->start);
res->start, res->end);
dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x\n",
resource_size(res), res->start);
dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
i2c_imx->adapter.name);
dev_dbg(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
return 0; /* Return OK */
fail5:
free_irq(i2c_imx->irq, i2c_imx);
fail4:
clk_put(i2c_imx->clk);
fail3:
kfree(i2c_imx);
fail2:
iounmap(base);
fail1:
release_mem_region(res->start, resource_size(res));
return ret; /* Return error number */
}
static int __exit i2c_imx_remove(struct platform_device *pdev)
......@@ -605,20 +578,12 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
i2c_del_adapter(&i2c_imx->adapter);
platform_set_drvdata(pdev, NULL);
/* free interrupt */
free_irq(i2c_imx->irq, i2c_imx);
/* setup chip registers to defaults */
writeb(0, i2c_imx->base + IMX_I2C_IADR);
writeb(0, i2c_imx->base + IMX_I2C_IFDR);
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
writeb(0, i2c_imx->base + IMX_I2C_I2SR);
clk_put(i2c_imx->clk);
iounmap(i2c_imx->base);
release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
kfree(i2c_imx);
return 0;
}
......
......@@ -18,6 +18,11 @@
#include <linux/mv643xx_i2c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_i2c.h>
#include <linux/clk.h>
#include <linux/err.h>
/* Register defines */
#define MV64XXX_I2C_REG_SLAVE_ADDR 0x00
......@@ -98,6 +103,9 @@ struct mv64xxx_i2c_data {
int rc;
u32 freq_m;
u32 freq_n;
#if defined(CONFIG_HAVE_CLK)
struct clk *clk;
#endif
wait_queue_head_t waitq;
spinlock_t lock;
struct i2c_msg *msg;
......@@ -521,6 +529,82 @@ mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
drv_data->reg_base_p = 0;
}
#ifdef CONFIG_OF
static int __devinit
mv64xxx_calc_freq(const int tclk, const int n, const int m)
{
return tclk / (10 * (m + 1) * (2 << n));
}
static bool __devinit
mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
u32 *best_m)
{
int freq, delta, best_delta = INT_MAX;
int m, n;
for (n = 0; n <= 7; n++)
for (m = 0; m <= 15; m++) {
freq = mv64xxx_calc_freq(tclk, n, m);
delta = req_freq - freq;
if (delta >= 0 && delta < best_delta) {
*best_m = m;
*best_n = n;
best_delta = delta;
}
if (best_delta == 0)
return true;
}
if (best_delta == INT_MAX)
return false;
return true;
}
static int __devinit
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
struct device_node *np)
{
u32 bus_freq, tclk;
int rc = 0;
/* CLK is mandatory when using DT to describe the i2c bus. We
* need to know tclk in order to calculate bus clock
* factors.
*/
#if !defined(CONFIG_HAVE_CLK)
/* Have OF but no CLK */
return -ENODEV;
#else
if (IS_ERR(drv_data->clk)) {
rc = -ENODEV;
goto out;
}
tclk = clk_get_rate(drv_data->clk);
of_property_read_u32(np, "clock-frequency", &bus_freq);
if (!mv64xxx_find_baud_factors(bus_freq, tclk,
&drv_data->freq_n, &drv_data->freq_m)) {
rc = -EINVAL;
goto out;
}
drv_data->irq = irq_of_parse_and_map(np, 0);
/* Its not yet defined how timeouts will be specified in device tree.
* So hard code the value to 1 second.
*/
drv_data->adapter.timeout = HZ;
out:
return rc;
#endif
}
#else /* CONFIG_OF */
static int __devinit
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
struct device_node *np)
{
return -ENODEV;
}
#endif /* CONFIG_OF */
static int __devinit
mv64xxx_i2c_probe(struct platform_device *pd)
{
......@@ -528,7 +612,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data;
int rc;
if ((pd->id != 0) || !pdata)
if ((!pdata && !pd->dev.of_node))
return -ENODEV;
drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
......@@ -546,19 +630,35 @@ mv64xxx_i2c_probe(struct platform_device *pd)
init_waitqueue_head(&drv_data->waitq);
spin_lock_init(&drv_data->lock);
drv_data->freq_m = pdata->freq_m;
drv_data->freq_n = pdata->freq_n;
drv_data->irq = platform_get_irq(pd, 0);
#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
drv_data->clk = clk_get(&pd->dev, NULL);
if (!IS_ERR(drv_data->clk)) {
clk_prepare(drv_data->clk);
clk_enable(drv_data->clk);
}
#endif
if (pdata) {
drv_data->freq_m = pdata->freq_m;
drv_data->freq_n = pdata->freq_n;
drv_data->irq = platform_get_irq(pd, 0);
drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
} else if (pd->dev.of_node) {
rc = mv64xxx_of_config(drv_data, pd->dev.of_node);
if (rc)
goto exit_unmap_regs;
}
if (drv_data->irq < 0) {
rc = -ENXIO;
goto exit_unmap_regs;
}
drv_data->adapter.dev.parent = &pd->dev;
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
drv_data->adapter.nr = pd->id;
drv_data->adapter.dev.of_node = pd->dev.of_node;
platform_set_drvdata(pd, drv_data);
i2c_set_adapdata(&drv_data->adapter, drv_data);
......@@ -577,11 +677,20 @@ mv64xxx_i2c_probe(struct platform_device *pd)
goto exit_free_irq;
}
of_i2c_register_devices(&drv_data->adapter);
return 0;
exit_free_irq:
free_irq(drv_data->irq, drv_data);
exit_unmap_regs:
#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
if (!IS_ERR(drv_data->clk)) {
clk_disable(drv_data->clk);
clk_unprepare(drv_data->clk);
}
#endif
mv64xxx_i2c_unmap_regs(drv_data);
exit_kfree:
kfree(drv_data);
......@@ -597,17 +706,31 @@ mv64xxx_i2c_remove(struct platform_device *dev)
rc = i2c_del_adapter(&drv_data->adapter);
free_irq(drv_data->irq, drv_data);
mv64xxx_i2c_unmap_regs(drv_data);
#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
if (!IS_ERR(drv_data->clk)) {
clk_disable(drv_data->clk);
clk_unprepare(drv_data->clk);
}
#endif
kfree(drv_data);
return rc;
}
static const struct of_device_id mv64xxx_i2c_of_match_table[] __devinitdata = {
{ .compatible = "marvell,mv64xxx-i2c", },
{}
};
MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
static struct platform_driver mv64xxx_i2c_driver = {
.probe = mv64xxx_i2c_probe,
.remove = __devexit_p(mv64xxx_i2c_remove),
.driver = {
.owner = THIS_MODULE,
.name = MV64XXX_I2C_CTLR_NAME,
.of_match_table = of_match_ptr(mv64xxx_i2c_of_match_table),
},
};
......
......@@ -46,6 +46,10 @@
#define MXS_I2C_CTRL0_DIRECTION 0x00010000
#define MXS_I2C_CTRL0_XFER_COUNT(v) ((v) & 0x0000FFFF)
#define MXS_I2C_TIMING0 (0x10)
#define MXS_I2C_TIMING1 (0x20)
#define MXS_I2C_TIMING2 (0x30)
#define MXS_I2C_CTRL1 (0x40)
#define MXS_I2C_CTRL1_SET (0x44)
#define MXS_I2C_CTRL1_CLR (0x48)
......@@ -97,6 +101,35 @@
#define MXS_CMD_I2C_READ (MXS_I2C_CTRL0_SEND_NAK_ON_LAST | \
MXS_I2C_CTRL0_MASTER_MODE)
struct mxs_i2c_speed_config {
uint32_t timing0;
uint32_t timing1;
uint32_t timing2;
};
/*
* Timing values for the default 24MHz clock supplied into the i2c block.
*
* The bus can operate at 95kHz or at 400kHz with the following timing
* register configurations. The 100kHz mode isn't present because it's
* values are not stated in the i.MX233/i.MX28 datasheet. The 95kHz mode
* shall be close enough replacement. Therefore when the bus is configured
* for 100kHz operation, 95kHz timing settings are actually loaded.
*
* For details, see i.MX233 [25.4.2 - 25.4.4] and i.MX28 [27.5.2 - 27.5.4].
*/
static const struct mxs_i2c_speed_config mxs_i2c_95kHz_config = {
.timing0 = 0x00780030,
.timing1 = 0x00800030,
.timing2 = 0x00300030,
};
static const struct mxs_i2c_speed_config mxs_i2c_400kHz_config = {
.timing0 = 0x000f0007,
.timing1 = 0x001f000f,
.timing2 = 0x00300030,
};
/**
* struct mxs_i2c_dev - per device, private MXS-I2C data
*
......@@ -112,11 +145,17 @@ struct mxs_i2c_dev {
struct completion cmd_complete;
u32 cmd_err;
struct i2c_adapter adapter;
const struct mxs_i2c_speed_config *speed;
};
static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
{
stmp_reset_block(i2c->regs);
writel(i2c->speed->timing0, i2c->regs + MXS_I2C_TIMING0);
writel(i2c->speed->timing1, i2c->regs + MXS_I2C_TIMING1);
writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
i2c->regs + MXS_I2C_QUEUECTRL_SET);
......@@ -193,7 +232,7 @@ static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c)
static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
{
u32 data;
u32 uninitialized_var(data);
int i;
for (i = 0; i < len; i++) {
......@@ -319,6 +358,28 @@ static const struct i2c_algorithm mxs_i2c_algo = {
.functionality = mxs_i2c_func,
};
static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
{
uint32_t speed;
struct device *dev = i2c->dev;
struct device_node *node = dev->of_node;
int ret;
if (!node)
return -EINVAL;
i2c->speed = &mxs_i2c_95kHz_config;
ret = of_property_read_u32(node, "clock-frequency", &speed);
if (ret)
dev_warn(dev, "No I2C speed selected, using 100kHz\n");
else if (speed == 400000)
i2c->speed = &mxs_i2c_400kHz_config;
else if (speed != 100000)
dev_warn(dev, "Unsupported I2C speed selected, using 100kHz\n");
return 0;
}
static int __devinit mxs_i2c_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
......@@ -358,6 +419,11 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
return err;
i2c->dev = dev;
err = mxs_i2c_get_ofdata(i2c);
if (err)
return err;
platform_set_drvdata(pdev, i2c);
/* Do reset to enforce correct startup after pinmuxing */
......
......@@ -14,7 +14,8 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/atomic.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
......@@ -23,8 +24,7 @@
#include <linux/io.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <plat/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
#define DRIVER_NAME "nmk-i2c"
......@@ -136,7 +136,7 @@ struct i2c_nmk_client {
/**
* struct nmk_i2c_dev - private data structure of the controller.
* @pdev: parent platform device.
* @adev: parent amba device.
* @adap: corresponding I2C adapter.
* @irq: interrupt line for the controller.
* @virtbase: virtual io memory area.
......@@ -150,7 +150,7 @@ struct i2c_nmk_client {
* @busy: Busy doing transfer.
*/
struct nmk_i2c_dev {
struct platform_device *pdev;
struct amba_device *adev;
struct i2c_adapter adap;
int irq;
void __iomem *virtbase;
......@@ -217,7 +217,7 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
}
}
dev_err(&dev->pdev->dev,
dev_err(&dev->adev->dev,
"flushing operation timed out giving up after %d attempts",
LOOP_ATTEMPTS);
......@@ -276,15 +276,32 @@ static int init_hw(struct nmk_i2c_dev *dev)
/**
* load_i2c_mcr_reg() - load the MCR register
* @dev: private data of controller
* @flags: message flags
*/
static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev)
static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags)
{
u32 mcr = 0;
unsigned short slave_adr_3msb_bits;
/* 7-bit address transaction */
mcr |= GEN_MASK(1, I2C_MCR_AM, 12);
mcr |= GEN_MASK(dev->cli.slave_adr, I2C_MCR_A7, 1);
if (unlikely(flags & I2C_M_TEN)) {
/* 10-bit address transaction */
mcr |= GEN_MASK(2, I2C_MCR_AM, 12);
/*
* Get the top 3 bits.
* EA10 represents extended address in MCR. This includes
* the extension (MSB bits) of the 7 bit address loaded
* in A7
*/
slave_adr_3msb_bits = (dev->cli.slave_adr >> 7) & 0x7;
mcr |= GEN_MASK(slave_adr_3msb_bits, I2C_MCR_EA10, 8);
} else {
/* 7-bit address transaction */
mcr |= GEN_MASK(1, I2C_MCR_AM, 12);
}
/* start byte procedure not applied */
mcr |= GEN_MASK(0, I2C_MCR_SB, 11);
......@@ -364,7 +381,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
* and high speed (up to 3.4 Mb/s)
*/
if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
dev_err(&dev->pdev->dev,
dev_err(&dev->adev->dev,
"do not support this mode defaulting to std. mode\n");
brcr2 = i2c_clk/(100000 * 2) & 0xffff;
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
......@@ -381,19 +398,20 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
/**
* read_i2c() - Read from I2C client device
* @dev: private data of I2C Driver
* @flags: message flags
*
* This function reads from i2c client device when controller is in
* master mode. There is a completion timeout. If there is no transfer
* before timeout error is returned.
*/
static int read_i2c(struct nmk_i2c_dev *dev)
static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
{
u32 status = 0;
u32 mcr;
u32 irq_mask = 0;
int timeout;
mcr = load_i2c_mcr_reg(dev);
mcr = load_i2c_mcr_reg(dev, flags);
writel(mcr, dev->virtbase + I2C_MCR);
/* load the current CR value */
......@@ -423,7 +441,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
dev_err(&dev->pdev->dev,
dev_err(&dev->adev->dev,
"wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
......@@ -431,7 +449,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
if (timeout == 0) {
/* Controller timed out */
dev_err(&dev->pdev->dev, "read from slave 0x%x timed out\n",
dev_err(&dev->adev->dev, "read from slave 0x%x timed out\n",
dev->cli.slave_adr);
status = -ETIMEDOUT;
}
......@@ -459,17 +477,18 @@ static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes)
/**
* write_i2c() - Write data to I2C client.
* @dev: private data of I2C Driver
* @flags: message flags
*
* This function writes data to I2C client
*/
static int write_i2c(struct nmk_i2c_dev *dev)
static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
{
u32 status = 0;
u32 mcr;
u32 irq_mask = 0;
int timeout;
mcr = load_i2c_mcr_reg(dev);
mcr = load_i2c_mcr_reg(dev, flags);
writel(mcr, dev->virtbase + I2C_MCR);
......@@ -510,7 +529,7 @@ static int write_i2c(struct nmk_i2c_dev *dev)
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
dev_err(&dev->pdev->dev,
dev_err(&dev->adev->dev,
"wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
......@@ -518,7 +537,7 @@ static int write_i2c(struct nmk_i2c_dev *dev)
if (timeout == 0) {
/* Controller timed out */
dev_err(&dev->pdev->dev, "write to slave 0x%x timed out\n",
dev_err(&dev->adev->dev, "write to slave 0x%x timed out\n",
dev->cli.slave_adr);
status = -ETIMEDOUT;
}
......@@ -538,11 +557,11 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
if (flags & I2C_M_RD) {
/* read operation */
dev->cli.operation = I2C_READ;
status = read_i2c(dev);
status = read_i2c(dev, flags);
} else {
/* write operation */
dev->cli.operation = I2C_WRITE;
status = write_i2c(dev);
status = write_i2c(dev, flags);
}
if (status || (dev->result)) {
......@@ -557,7 +576,7 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
if (((i2c_sr >> 2) & 0x3) == 0x3) {
/* get the abort cause */
cause = (i2c_sr >> 4) & 0x7;
dev_err(&dev->pdev->dev, "%s\n",
dev_err(&dev->adev->dev, "%s\n",
cause >= ARRAY_SIZE(abort_causes) ?
"unknown reason" :
abort_causes[cause]);
......@@ -630,7 +649,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
if (dev->regulator)
regulator_enable(dev->regulator);
pm_runtime_get_sync(&dev->pdev->dev);
pm_runtime_get_sync(&dev->adev->dev);
clk_enable(dev->clk);
......@@ -644,13 +663,6 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
setup_i2c_controller(dev);
for (i = 0; i < num_msgs; i++) {
if (unlikely(msgs[i].flags & I2C_M_TEN)) {
dev_err(&dev->pdev->dev,
"10 bit addressing not supported\n");
status = -EINVAL;
goto out;
}
dev->cli.slave_adr = msgs[i].addr;
dev->cli.buffer = msgs[i].buf;
dev->cli.count = msgs[i].len;
......@@ -667,7 +679,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
out:
clk_disable(dev->clk);
pm_runtime_put_sync(&dev->pdev->dev);
pm_runtime_put_sync(&dev->adev->dev);
if (dev->regulator)
regulator_disable(dev->regulator);
......@@ -790,7 +802,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
if (dev->cli.count) {
dev->result = -EIO;
dev_err(&dev->pdev->dev,
dev_err(&dev->adev->dev,
"%lu bytes still remain to be xfered\n",
dev->cli.count);
(void) init_hw(dev);
......@@ -834,7 +846,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
dev->result = -EIO;
(void) init_hw(dev);
dev_err(&dev->pdev->dev, "Tx Fifo Over run\n");
dev_err(&dev->adev->dev, "Tx Fifo Over run\n");
complete(&dev->xfer_complete);
break;
......@@ -847,10 +859,10 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
case I2C_IT_RFSE:
case I2C_IT_WTSR:
case I2C_IT_STD:
dev_err(&dev->pdev->dev, "unhandled Interrupt\n");
dev_err(&dev->adev->dev, "unhandled Interrupt\n");
break;
default:
dev_err(&dev->pdev->dev, "spurious Interrupt..\n");
dev_err(&dev->adev->dev, "spurious Interrupt..\n");
break;
}
......@@ -861,8 +873,8 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
#ifdef CONFIG_PM
static int nmk_i2c_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct nmk_i2c_dev *nmk_i2c = platform_get_drvdata(pdev);
struct amba_device *adev = to_amba_device(dev);
struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
if (nmk_i2c->busy)
return -EBUSY;
......@@ -891,7 +903,7 @@ static const struct dev_pm_ops nmk_i2c_pm = {
static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
}
static const struct i2c_algorithm nmk_i2c_algo = {
......@@ -899,78 +911,69 @@ static const struct i2c_algorithm nmk_i2c_algo = {
.functionality = nmk_i2c_functionality
};
static int __devinit nmk_i2c_probe(struct platform_device *pdev)
static atomic_t adapter_id = ATOMIC_INIT(0);
static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
struct resource *res;
struct nmk_i2c_controller *pdata =
pdev->dev.platform_data;
adev->dev.platform_data;
struct nmk_i2c_dev *dev;
struct i2c_adapter *adap;
if (!pdata) {
dev_warn(&adev->dev, "no platform data\n");
return -ENODEV;
}
dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
if (!dev) {
dev_err(&pdev->dev, "cannot allocate memory\n");
dev_err(&adev->dev, "cannot allocate memory\n");
ret = -ENOMEM;
goto err_no_mem;
}
dev->busy = false;
dev->pdev = pdev;
platform_set_drvdata(pdev, dev);
dev->adev = adev;
amba_set_drvdata(adev, dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
ret = -ENOENT;
goto err_no_resource;
}
if (request_mem_region(res->start, resource_size(res),
DRIVER_NAME "I/O region") == NULL) {
ret = -EBUSY;
goto err_no_region;
}
dev->virtbase = ioremap(res->start, resource_size(res));
dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
if (!dev->virtbase) {
ret = -ENOMEM;
goto err_no_ioremap;
}
dev->irq = platform_get_irq(pdev, 0);
dev->irq = adev->irq[0];
ret = request_irq(dev->irq, i2c_irq_handler, 0,
DRIVER_NAME, dev);
if (ret) {
dev_err(&pdev->dev, "cannot claim the irq %d\n", dev->irq);
dev_err(&adev->dev, "cannot claim the irq %d\n", dev->irq);
goto err_irq;
}
dev->regulator = regulator_get(&pdev->dev, "v-i2c");
dev->regulator = regulator_get(&adev->dev, "v-i2c");
if (IS_ERR(dev->regulator)) {
dev_warn(&pdev->dev, "could not get i2c regulator\n");
dev_warn(&adev->dev, "could not get i2c regulator\n");
dev->regulator = NULL;
}
pm_suspend_ignore_children(&pdev->dev, true);
pm_runtime_enable(&pdev->dev);
pm_suspend_ignore_children(&adev->dev, true);
dev->clk = clk_get(&pdev->dev, NULL);
dev->clk = clk_get(&adev->dev, NULL);
if (IS_ERR(dev->clk)) {
dev_err(&pdev->dev, "could not get i2c clock\n");
dev_err(&adev->dev, "could not get i2c clock\n");
ret = PTR_ERR(dev->clk);
goto err_no_clk;
}
adap = &dev->adap;
adap->dev.parent = &pdev->dev;
adap->dev.parent = &adev->dev;
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &nmk_i2c_algo;
adap->timeout = msecs_to_jiffies(pdata->timeout);
adap->nr = atomic_read(&adapter_id);
snprintf(adap->name, sizeof(adap->name),
"Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start);
/* fetch the controller id */
adap->nr = pdev->id;
"Nomadik I2C%d at %pR", adap->nr, &adev->res);
atomic_inc(&adapter_id);
/* fetch the controller configuration from machine */
dev->cfg.clk_freq = pdata->clk_freq;
......@@ -981,16 +984,18 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(adap, dev);
dev_info(&pdev->dev,
dev_info(&adev->dev,
"initialize %s on virtual base %p\n",
adap->name, dev->virtbase);
ret = i2c_add_numbered_adapter(adap);
if (ret) {
dev_err(&pdev->dev, "failed to add adapter\n");
dev_err(&adev->dev, "failed to add adapter\n");
goto err_add_adap;
}
pm_runtime_put(&adev->dev);
return 0;
err_add_adap:
......@@ -998,25 +1003,21 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
err_no_clk:
if (dev->regulator)
regulator_put(dev->regulator);
pm_runtime_disable(&pdev->dev);
free_irq(dev->irq, dev);
err_irq:
iounmap(dev->virtbase);
err_no_ioremap:
release_mem_region(res->start, resource_size(res));
err_no_region:
platform_set_drvdata(pdev, NULL);
err_no_resource:
amba_set_drvdata(adev, NULL);
kfree(dev);
err_no_mem:
return ret;
}
static int __devexit nmk_i2c_remove(struct platform_device *pdev)
static int nmk_i2c_remove(struct amba_device *adev)
{
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct nmk_i2c_dev *dev = platform_get_drvdata(pdev);
struct resource *res = &adev->res;
struct nmk_i2c_dev *dev = amba_get_drvdata(adev);
i2c_del_adapter(&dev->adap);
flush_i2c_fifo(dev);
......@@ -1031,31 +1032,46 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
clk_put(dev->clk);
if (dev->regulator)
regulator_put(dev->regulator);
pm_runtime_disable(&pdev->dev);
platform_set_drvdata(pdev, NULL);
pm_runtime_disable(&adev->dev);
amba_set_drvdata(adev, NULL);
kfree(dev);
return 0;
}
static struct platform_driver nmk_i2c_driver = {
.driver = {
static struct amba_id nmk_i2c_ids[] = {
{
.id = 0x00180024,
.mask = 0x00ffffff,
},
{
.id = 0x00380024,
.mask = 0x00ffffff,
},
{},
};
MODULE_DEVICE_TABLE(amba, nmk_i2c_ids);
static struct amba_driver nmk_i2c_driver = {
.drv = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.pm = &nmk_i2c_pm,
},
.id_table = nmk_i2c_ids,
.probe = nmk_i2c_probe,
.remove = __devexit_p(nmk_i2c_remove),
.remove = nmk_i2c_remove,
};
static int __init nmk_i2c_init(void)
{
return platform_driver_register(&nmk_i2c_driver);
return amba_driver_register(&nmk_i2c_driver);
}
static void __exit nmk_i2c_exit(void)
{
platform_driver_unregister(&nmk_i2c_driver);
amba_driver_unregister(&nmk_i2c_driver);
}
subsys_initcall(nmk_i2c_init);
......@@ -1064,4 +1080,3 @@ module_exit(nmk_i2c_exit);
MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR");
MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
......@@ -10,40 +10,9 @@
*/
/*
* Device tree configuration:
*
* Required properties:
* - compatible : "opencores,i2c-ocores"
* - reg : bus address start and address range size of device
* - interrupts : interrupt number
* - regstep : size of device registers in bytes
* - clock-frequency : frequency of bus clock in Hz
*
* Example:
*
* i2c0: ocores@a0000000 {
* compatible = "opencores,i2c-ocores";
* reg = <0xa0000000 0x8>;
* interrupts = <10>;
*
* regstep = <1>;
* clock-frequency = <20000000>;
*
* -- Devices connected on this I2C bus get
* -- defined here; address- and size-cells
* -- apply to these child devices
*
* #address-cells = <1>;
* #size-cells = <0>;
*
* dummy@60 {
* compatible = "dummy";
* reg = <60>;
* };
* };
*
* This driver can be used from the device tree, see
* Documentation/devicetree/bindings/i2c/ocore-i2c.txt
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
......@@ -56,10 +25,12 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of_i2c.h>
#include <linux/log2.h>
struct ocores_i2c {
void __iomem *base;
int regstep;
u32 reg_shift;
u32 reg_io_width;
wait_queue_head_t wait;
struct i2c_adapter adap;
struct i2c_msg *msg;
......@@ -102,12 +73,22 @@ struct ocores_i2c {
static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
{
iowrite8(value, i2c->base + reg * i2c->regstep);
if (i2c->reg_io_width == 4)
iowrite32(value, i2c->base + (reg << i2c->reg_shift));
else if (i2c->reg_io_width == 2)
iowrite16(value, i2c->base + (reg << i2c->reg_shift));
else
iowrite8(value, i2c->base + (reg << i2c->reg_shift));
}
static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg)
{
return ioread8(i2c->base + reg * i2c->regstep);
if (i2c->reg_io_width == 4)
return ioread32(i2c->base + (reg << i2c->reg_shift));
else if (i2c->reg_io_width == 2)
return ioread16(i2c->base + (reg << i2c->reg_shift));
else
return ioread8(i2c->base + (reg << i2c->reg_shift));
}
static void ocores_process(struct ocores_i2c *i2c)
......@@ -247,26 +228,35 @@ static struct i2c_adapter ocores_adapter = {
};
#ifdef CONFIG_OF
static int ocores_i2c_of_probe(struct platform_device* pdev,
struct ocores_i2c* i2c)
static int ocores_i2c_of_probe(struct platform_device *pdev,
struct ocores_i2c *i2c)
{
const __be32* val;
val = of_get_property(pdev->dev.of_node, "regstep", NULL);
if (!val) {
dev_err(&pdev->dev, "Missing required parameter 'regstep'");
return -ENODEV;
struct device_node *np = pdev->dev.of_node;
u32 val;
if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) {
/* no 'reg-shift', check for deprecated 'regstep' */
if (!of_property_read_u32(np, "regstep", &val)) {
if (!is_power_of_2(val)) {
dev_err(&pdev->dev, "invalid regstep %d\n",
val);
return -EINVAL;
}
i2c->reg_shift = ilog2(val);
dev_warn(&pdev->dev,
"regstep property deprecated, use reg-shift\n");
}
}
i2c->regstep = be32_to_cpup(val);
val = of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
if (!val) {
if (of_property_read_u32(np, "clock-frequency", &val)) {
dev_err(&pdev->dev,
"Missing required parameter 'clock-frequency'");
"Missing required parameter 'clock-frequency'\n");
return -ENODEV;
}
i2c->clock_khz = be32_to_cpup(val) / 1000;
i2c->clock_khz = val / 1000;
of_property_read_u32(pdev->dev.of_node, "reg-io-width",
&i2c->reg_io_width);
return 0;
}
#else
......@@ -308,7 +298,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
if (pdata) {
i2c->regstep = pdata->regstep;
i2c->reg_shift = pdata->reg_shift;
i2c->reg_io_width = pdata->reg_io_width;
i2c->clock_khz = pdata->clock_khz;
} else {
ret = ocores_i2c_of_probe(pdev, i2c);
......@@ -316,6 +307,9 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
return ret;
}
if (i2c->reg_io_width == 0)
i2c->reg_io_width = 1; /* Set to default value */
ocores_init(i2c);
init_waitqueue_head(&i2c->wait);
......@@ -351,7 +345,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
return 0;
}
static int __devexit ocores_i2c_remove(struct platform_device* pdev)
static int __devexit ocores_i2c_remove(struct platform_device *pdev)
{
struct ocores_i2c *i2c = platform_get_drvdata(pdev);
......@@ -367,9 +361,9 @@ static int __devexit ocores_i2c_remove(struct platform_device* pdev)
}
#ifdef CONFIG_PM
static int ocores_i2c_suspend(struct platform_device *pdev, pm_message_t state)
static int ocores_i2c_suspend(struct device *dev)
{
struct ocores_i2c *i2c = platform_get_drvdata(pdev);
struct ocores_i2c *i2c = dev_get_drvdata(dev);
u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
/* make sure the device is disabled */
......@@ -378,17 +372,19 @@ static int ocores_i2c_suspend(struct platform_device *pdev, pm_message_t state)
return 0;
}
static int ocores_i2c_resume(struct platform_device *pdev)
static int ocores_i2c_resume(struct device *dev)
{
struct ocores_i2c *i2c = platform_get_drvdata(pdev);
struct ocores_i2c *i2c = dev_get_drvdata(dev);
ocores_init(i2c);
return 0;
}
static SIMPLE_DEV_PM_OPS(ocores_i2c_pm, ocores_i2c_suspend, ocores_i2c_resume);
#define OCORES_I2C_PM (&ocores_i2c_pm)
#else
#define ocores_i2c_suspend NULL
#define ocores_i2c_resume NULL
#define OCORES_I2C_PM NULL
#endif
static struct of_device_id ocores_i2c_match[] = {
......@@ -400,12 +396,11 @@ MODULE_DEVICE_TABLE(of, ocores_i2c_match);
static struct platform_driver ocores_i2c_driver = {
.probe = ocores_i2c_probe,
.remove = __devexit_p(ocores_i2c_remove),
.suspend = ocores_i2c_suspend,
.resume = ocores_i2c_resume,
.driver = {
.owner = THIS_MODULE,
.name = "ocores-i2c",
.of_match_table = ocores_i2c_match,
.pm = OCORES_I2C_PM,
},
};
......
......@@ -49,8 +49,8 @@
/* I2C controller revisions present on specific hardware */
#define OMAP_I2C_REV_ON_2430 0x36
#define OMAP_I2C_REV_ON_3430 0x3C
#define OMAP_I2C_REV_ON_3530_4430 0x40
#define OMAP_I2C_REV_ON_3430_3530 0x3C
#define OMAP_I2C_REV_ON_3630_4430 0x40
/* timeout waiting for the controller to respond */
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
......@@ -173,7 +173,7 @@ enum {
/* Errata definitions */
#define I2C_OMAP_ERRATA_I207 (1 << 0)
#define I2C_OMAP3_1P153 (1 << 1)
#define I2C_OMAP_ERRATA_I462 (1 << 1)
struct omap_i2c_dev {
struct device *dev;
......@@ -269,47 +269,6 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
(i2c_dev->regs[reg] << i2c_dev->reg_shift));
}
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate);
omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
}
/*
* Don't write to this register if the IE state is 0 as it can
* cause deadlock.
*/
if (dev->iestate)
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
}
static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
u16 iv;
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
else
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
if (dev->rev < OMAP_I2C_OMAP1_REV_2) {
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
} else {
omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
/* Flush posted write */
omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
}
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
{
u16 psc = 0, scll = 0, sclh = 0, buf = 0;
......@@ -346,7 +305,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
SYSC_AUTOIDLE_MASK);
} else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
} else if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) {
dev->syscstate = SYSC_AUTOIDLE_MASK;
dev->syscstate |= SYSC_ENAWAKEUP_MASK;
dev->syscstate |= (SYSC_IDLEMODE_SMART <<
......@@ -468,11 +427,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
/* Take the I2C module out of reset: */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
dev->errata = 0;
if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
dev->errata |= I2C_OMAP_ERRATA_I207;
/* Enable interrupts */
dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
......@@ -514,7 +468,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
struct i2c_msg *msg, int stop)
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
int r;
unsigned long timeout;
u16 w;
dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
......@@ -536,7 +490,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w);
init_completion(&dev->cmd_complete);
INIT_COMPLETION(dev->cmd_complete);
dev->cmd_err = 0;
w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
......@@ -584,12 +538,10 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
* REVISIT: We should abort the transfer on signals, but the bus goes
* into arbitration and we're currently unable to recover from it.
*/
r = wait_for_completion_timeout(&dev->cmd_complete,
OMAP_I2C_TIMEOUT);
timeout = wait_for_completion_timeout(&dev->cmd_complete,
OMAP_I2C_TIMEOUT);
dev->buf_len = 0;
if (r < 0)
return r;
if (r == 0) {
if (timeout == 0) {
dev_err(dev->dev, "controller timed out\n");
omap_i2c_init(dev);
return -ETIMEDOUT;
......@@ -630,7 +582,9 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
int i;
int r;
pm_runtime_get_sync(dev->dev);
r = pm_runtime_get_sync(dev->dev);
if (IS_ERR_VALUE(r))
return r;
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
......@@ -767,11 +721,11 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id)
#endif
/*
* OMAP3430 Errata 1.153: When an XRDY/XDR is hit, wait for XUDF before writing
* OMAP3430 Errata i462: When an XRDY/XDR is hit, wait for XUDF before writing
* data to DATA_REG. Otherwise some data bytes can be lost while transferring
* them from the memory to the I2C interface.
*/
static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
static int errata_omap3_i462(struct omap_i2c_dev *dev, u16 *stat, int *err)
{
unsigned long timeout = 10000;
......@@ -779,7 +733,6 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
OMAP_I2C_STAT_XDR));
*err |= OMAP_I2C_STAT_XUDF;
return -ETIMEDOUT;
}
......@@ -792,6 +745,7 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
return 0;
}
*err |= OMAP_I2C_STAT_XUDF;
return 0;
}
......@@ -930,8 +884,8 @@ omap_i2c_isr(int this_irq, void *dev_id)
break;
}
if ((dev->errata & I2C_OMAP3_1P153) &&
errata_omap3_1p153(dev, &stat, &err))
if ((dev->errata & I2C_OMAP_ERRATA_I462) &&
errata_omap3_i462(dev, &stat, &err))
goto complete;
omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
......@@ -1048,6 +1002,7 @@ omap_i2c_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, dev);
init_completion(&dev->cmd_complete);
dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
......@@ -1057,12 +1012,19 @@ omap_i2c_probe(struct platform_device *pdev)
dev->regs = (u8 *)reg_map_ip_v1;
pm_runtime_enable(dev->dev);
pm_runtime_get_sync(dev->dev);
r = pm_runtime_get_sync(dev->dev);
if (IS_ERR_VALUE(r))
goto err_free_mem;
dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
if (dev->rev <= OMAP_I2C_REV_ON_3430)
dev->errata |= I2C_OMAP3_1P153;
dev->errata = 0;
if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
dev->errata |= I2C_OMAP_ERRATA_I207;
if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
dev->errata |= I2C_OMAP_ERRATA_I462;
if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
u16 s;
......@@ -1079,7 +1041,7 @@ omap_i2c_probe(struct platform_device *pdev)
dev->fifo_size = (dev->fifo_size / 2);
if (dev->rev >= OMAP_I2C_REV_ON_3530_4430)
if (dev->rev >= OMAP_I2C_REV_ON_3630_4430)
dev->b_hw = 0; /* Disable hardware fixes */
else
dev->b_hw = 1; /* Enable hardware fixes */
......@@ -1095,7 +1057,7 @@ omap_i2c_probe(struct platform_device *pdev)
isr = (dev->rev < OMAP_I2C_OMAP1_REV_2) ? omap_i2c_omap1_isr :
omap_i2c_isr;
r = request_irq(dev->irq, isr, 0, pdev->name, dev);
r = request_irq(dev->irq, isr, IRQF_NO_SUSPEND, pdev->name, dev);
if (r) {
dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
......@@ -1105,8 +1067,6 @@ omap_i2c_probe(struct platform_device *pdev)
dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
pm_runtime_put(dev->dev);
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
......@@ -1126,6 +1086,8 @@ omap_i2c_probe(struct platform_device *pdev)
of_i2c_register_devices(adap);
pm_runtime_put(dev->dev);
return 0;
err_free_irq:
......@@ -1134,6 +1096,7 @@ omap_i2c_probe(struct platform_device *pdev)
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
pm_runtime_put(dev->dev);
iounmap(dev->base);
pm_runtime_disable(&pdev->dev);
err_free_mem:
platform_set_drvdata(pdev, NULL);
kfree(dev);
......@@ -1143,17 +1106,23 @@ omap_i2c_probe(struct platform_device *pdev)
return r;
}
static int
omap_i2c_remove(struct platform_device *pdev)
static int __devexit omap_i2c_remove(struct platform_device *pdev)
{
struct omap_i2c_dev *dev = platform_get_drvdata(pdev);
struct resource *mem;
int ret;
platform_set_drvdata(pdev, NULL);
free_irq(dev->irq, dev);
i2c_del_adapter(&dev->adapter);
ret = pm_runtime_get_sync(&pdev->dev);
if (IS_ERR_VALUE(ret))
return ret;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
iounmap(dev->base);
kfree(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
......@@ -1161,13 +1130,26 @@ omap_i2c_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM
#ifdef CONFIG_PM_RUNTIME
static int omap_i2c_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
u16 iv;
_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
omap_i2c_idle(_dev);
if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
} else {
omap_i2c_write_reg(_dev, OMAP_I2C_STAT_REG, _dev->iestate);
/* Flush posted write */
omap_i2c_read_reg(_dev, OMAP_I2C_STAT_REG);
}
return 0;
}
......@@ -1177,23 +1159,40 @@ static int omap_i2c_runtime_resume(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
omap_i2c_unidle(_dev);
if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
}
/*
* Don't write to this register if the IE state is 0 as it can
* cause deadlock.
*/
if (_dev->iestate)
omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
return 0;
}
#endif /* CONFIG_PM_RUNTIME */
static struct dev_pm_ops omap_i2c_pm_ops = {
.runtime_suspend = omap_i2c_runtime_suspend,
.runtime_resume = omap_i2c_runtime_resume,
SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
omap_i2c_runtime_resume, NULL)
};
#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
#else
#define OMAP_I2C_PM_OPS NULL
#endif
#endif /* CONFIG_PM */
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
.remove = omap_i2c_remove,
.remove = __devexit_p(omap_i2c_remove),
.driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
......
......@@ -587,25 +587,27 @@ static struct i2c_algorithm pnx_algorithm = {
};
#ifdef CONFIG_PM
static int i2c_pnx_controller_suspend(struct platform_device *pdev,
pm_message_t state)
static int i2c_pnx_controller_suspend(struct device *dev)
{
struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
clk_disable(alg_data->clk);
return 0;
}
static int i2c_pnx_controller_resume(struct platform_device *pdev)
static int i2c_pnx_controller_resume(struct device *dev)
{
struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
return clk_enable(alg_data->clk);
}
static SIMPLE_DEV_PM_OPS(i2c_pnx_pm,
i2c_pnx_controller_suspend, i2c_pnx_controller_resume);
#define PNX_I2C_PM (&i2c_pnx_pm)
#else
#define i2c_pnx_controller_suspend NULL
#define i2c_pnx_controller_resume NULL
#define PNX_I2C_PM NULL
#endif
static int __devinit i2c_pnx_probe(struct platform_device *pdev)
......@@ -783,11 +785,10 @@ static struct platform_driver i2c_pnx_driver = {
.name = "pnx-i2c",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(i2c_pnx_of_match),
.pm = PNX_I2C_PM,
},
.probe = i2c_pnx_probe,
.remove = __devexit_p(i2c_pnx_remove),
.suspend = i2c_pnx_controller_suspend,
.resume = i2c_pnx_controller_resume,
};
static int __init i2c_adap_pnx_init(void)
......
......@@ -254,7 +254,7 @@ static int __devexit puv3_i2c_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
static int puv3_i2c_suspend(struct platform_device *dev, pm_message_t state)
static int puv3_i2c_suspend(struct device *dev)
{
int poll_count;
/* Disable the IIC */
......@@ -267,23 +267,20 @@ static int puv3_i2c_suspend(struct platform_device *dev, pm_message_t state)
return 0;
}
static int puv3_i2c_resume(struct platform_device *dev)
{
return 0 ;
}
static SIMPLE_DEV_PM_OPS(puv3_i2c_pm, puv3_i2c_suspend, NULL);
#define PUV3_I2C_PM (&puv3_i2c_pm)
#else
#define puv3_i2c_suspend NULL
#define puv3_i2c_resume NULL
#define PUV3_I2C_PM NULL
#endif
static struct platform_driver puv3_i2c_driver = {
.probe = puv3_i2c_probe,
.remove = __devexit_p(puv3_i2c_remove),
.suspend = puv3_i2c_suspend,
.resume = puv3_i2c_resume,
.driver = {
.name = "PKUnity-v3-I2C",
.owner = THIS_MODULE,
.pm = PUV3_I2C_PM,
}
};
......
......@@ -122,7 +122,7 @@ static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pde
{
if (pdev->dev.of_node) {
const struct of_device_id *match;
match = of_match_node(&s3c24xx_i2c_match, pdev->dev.of_node);
match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node);
return (unsigned int)match->data;
}
......@@ -609,7 +609,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
if (ret != -EAGAIN) {
clk_disable(i2c->clk);
pm_runtime_put_sync(&adap->dev);
pm_runtime_put(&adap->dev);
return ret;
}
......@@ -619,7 +619,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
}
clk_disable(i2c->clk);
pm_runtime_put_sync(&adap->dev);
pm_runtime_put(&adap->dev);
return -EREMOTEIO;
}
......
/*
* Copyright (C) 2007-2009 ST-Ericsson AB
* Copyright (C) 2007-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* ST DDC I2C master mode driver, used in e.g. U300 series platforms.
* Author: Linus Walleij <linus.walleij@stericsson.com>
......@@ -139,8 +139,6 @@ module_param(scl_frequency, uint, 0644);
* struct stu300_dev - the stu300 driver state holder
* @pdev: parent platform device
* @adapter: corresponding I2C adapter
* @phybase: location of I/O area in memory
* @physize: size of I/O area in memory
* @clk: hardware block clock
* @irq: assigned interrupt line
* @cmd_issue_lock: this locks the following cmd_ variables
......@@ -155,8 +153,6 @@ module_param(scl_frequency, uint, 0644);
struct stu300_dev {
struct platform_device *pdev;
struct i2c_adapter adapter;
resource_size_t phybase;
resource_size_t physize;
void __iomem *virtbase;
struct clk *clk;
int irq;
......@@ -873,64 +869,44 @@ stu300_probe(struct platform_device *pdev)
int ret = 0;
char clk_name[] = "I2C0";
dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL);
dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL);
if (!dev) {
dev_err(&pdev->dev, "could not allocate device struct\n");
ret = -ENOMEM;
goto err_no_devmem;
return -ENOMEM;
}
bus_nr = pdev->id;
clk_name[3] += (char)bus_nr;
dev->clk = clk_get(&pdev->dev, clk_name);
dev->clk = devm_clk_get(&pdev->dev, clk_name);
if (IS_ERR(dev->clk)) {
ret = PTR_ERR(dev->clk);
dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
goto err_no_clk;
return PTR_ERR(dev->clk);
}
dev->pdev = pdev;
platform_set_drvdata(pdev, dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
ret = -ENOENT;
goto err_no_resource;
}
dev->phybase = res->start;
dev->physize = resource_size(res);
if (request_mem_region(dev->phybase, dev->physize,
NAME " I/O Area") == NULL) {
ret = -EBUSY;
goto err_no_ioregion;
}
if (!res)
return -ENOENT;
dev->virtbase = ioremap(dev->phybase, dev->physize);
dev->virtbase = devm_request_and_ioremap(&pdev->dev, res);
dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
"base %p\n", bus_nr, dev->virtbase);
if (!dev->virtbase) {
ret = -ENOMEM;
goto err_no_ioremap;
}
if (!dev->virtbase)
return -ENOMEM;
dev->irq = platform_get_irq(pdev, 0);
if (request_irq(dev->irq, stu300_irh, 0,
NAME, dev)) {
ret = -EIO;
goto err_no_irq;
}
ret = devm_request_irq(&pdev->dev, dev->irq, stu300_irh, 0, NAME, dev);
if (ret < 0)
return ret;
dev->speed = scl_frequency;
clk_enable(dev->clk);
clk_prepare_enable(dev->clk);
ret = stu300_init_hw(dev);
clk_disable(dev->clk);
if (ret != 0) {
dev_err(&dev->pdev->dev, "error initializing hardware.\n");
goto err_init_hw;
return -EIO;
}
/* IRQ event handling initialization */
......@@ -952,57 +928,43 @@ stu300_probe(struct platform_device *pdev)
/* i2c device drivers may be active on return from add_adapter() */
ret = i2c_add_numbered_adapter(adap);
if (ret) {
dev_err(&dev->pdev->dev, "failure adding ST Micro DDC "
dev_err(&pdev->dev, "failure adding ST Micro DDC "
"I2C adapter\n");
goto err_add_adapter;
return ret;
}
return 0;
err_add_adapter:
err_init_hw:
free_irq(dev->irq, dev);
err_no_irq:
iounmap(dev->virtbase);
err_no_ioremap:
release_mem_region(dev->phybase, dev->physize);
err_no_ioregion:
platform_set_drvdata(pdev, NULL);
err_no_resource:
clk_put(dev->clk);
err_no_clk:
kfree(dev);
err_no_devmem:
dev_err(&pdev->dev, "failed to add " NAME " adapter: %d\n",
pdev->id);
return ret;
platform_set_drvdata(pdev, dev);
return 0;
}
#ifdef CONFIG_PM
static int stu300_suspend(struct platform_device *pdev, pm_message_t state)
static int stu300_suspend(struct device *device)
{
struct stu300_dev *dev = platform_get_drvdata(pdev);
struct stu300_dev *dev = dev_get_drvdata(device);
/* Turn off everything */
stu300_wr8(0x00, dev->virtbase + I2C_CR);
return 0;
}
static int stu300_resume(struct platform_device *pdev)
static int stu300_resume(struct device *device)
{
int ret = 0;
struct stu300_dev *dev = platform_get_drvdata(pdev);
struct stu300_dev *dev = dev_get_drvdata(device);
clk_enable(dev->clk);
ret = stu300_init_hw(dev);
clk_disable(dev->clk);
if (ret != 0)
dev_err(&pdev->dev, "error re-initializing hardware.\n");
dev_err(device, "error re-initializing hardware.\n");
return ret;
}
static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume);
#define STU300_I2C_PM (&stu300_pm)
#else
#define stu300_suspend NULL
#define stu300_resume NULL
#define STU300_I2C_PM NULL
#endif
static int __exit
......@@ -1013,12 +975,7 @@ stu300_remove(struct platform_device *pdev)
i2c_del_adapter(&dev->adapter);
/* Turn off everything */
stu300_wr8(0x00, dev->virtbase + I2C_CR);
free_irq(dev->irq, dev);
iounmap(dev->virtbase);
release_mem_region(dev->phybase, dev->physize);
clk_put(dev->clk);
platform_set_drvdata(pdev, NULL);
kfree(dev);
return 0;
}
......@@ -1026,10 +983,9 @@ static struct platform_driver stu300_i2c_driver = {
.driver = {
.name = NAME,
.owner = THIS_MODULE,
.pm = STU300_I2C_PM,
},
.remove = __exit_p(stu300_remove),
.suspend = stu300_suspend,
.resume = stu300_resume,
};
......
......@@ -97,8 +97,21 @@
#define I2C_HEADER_10BIT_ADDR (1<<18)
#define I2C_HEADER_IE_ENABLE (1<<17)
#define I2C_HEADER_REPEAT_START (1<<16)
#define I2C_HEADER_CONTINUE_XFER (1<<15)
#define I2C_HEADER_MASTER_ADDR_SHIFT 12
#define I2C_HEADER_SLAVE_ADDR_SHIFT 1
/*
* msg_end_type: The bus control which need to be send at end of transfer.
* @MSG_END_STOP: Send stop pulse at end of transfer.
* @MSG_END_REPEAT_START: Send repeat start at end of transfer.
* @MSG_END_CONTINUE: The following on message is coming and so do not send
* stop or repeat start.
*/
enum msg_end_type {
MSG_END_STOP,
MSG_END_REPEAT_START,
MSG_END_CONTINUE,
};
/**
* struct tegra_i2c_dev - per device i2c context
......@@ -106,7 +119,6 @@
* @adapter: core i2c layer adapter information
* @clk: clock reference for i2c controller
* @i2c_clk: clock reference for i2c bus
* @iomem: memory resource for registers
* @base: ioremapped registers cookie
* @cont_id: i2c controller id, used for for packet header
* @irq: irq number of transfer complete interrupt
......@@ -124,7 +136,6 @@ struct tegra_i2c_dev {
struct i2c_adapter adapter;
struct clk *clk;
struct clk *i2c_clk;
struct resource *iomem;
void __iomem *base;
int cont_id;
int irq;
......@@ -165,6 +176,10 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
unsigned long reg)
{
writel(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
/* Read back register to make sure that register writes completed */
if (reg != I2C_TX_FIFO)
readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
}
static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
......@@ -449,7 +464,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
}
static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
struct i2c_msg *msg, int stop)
struct i2c_msg *msg, enum msg_end_type end_state)
{
u32 packet_header;
u32 int_mask;
......@@ -476,7 +491,9 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
packet_header = I2C_HEADER_IE_ENABLE;
if (!stop)
if (end_state == MSG_END_CONTINUE)
packet_header |= I2C_HEADER_CONTINUE_XFER;
else if (end_state == MSG_END_REPEAT_START)
packet_header |= I2C_HEADER_REPEAT_START;
if (msg->flags & I2C_M_TEN) {
packet_header |= msg->addr;
......@@ -548,8 +565,14 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
clk_prepare_enable(i2c_dev->clk);
for (i = 0; i < num; i++) {
int stop = (i == (num - 1)) ? 1 : 0;
ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], stop);
enum msg_end_type end_type = MSG_END_STOP;
if (i < (num - 1)) {
if (msgs[i + 1].flags & I2C_M_NOSTART)
end_type = MSG_END_CONTINUE;
else
end_type = MSG_END_REPEAT_START;
}
ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
if (ret)
break;
}
......@@ -559,7 +582,8 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
static u32 tegra_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART;
}
static const struct i2c_algorithm tegra_i2c_algo = {
......@@ -572,7 +596,6 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
struct tegra_i2c_dev *i2c_dev;
struct tegra_i2c_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
struct resource *iomem;
struct clk *clk;
struct clk *i2c_clk;
const unsigned int *prop;
......@@ -585,50 +608,41 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "no mem resource\n");
return -EINVAL;
}
iomem = request_mem_region(res->start, resource_size(res), pdev->name);
if (!iomem) {
dev_err(&pdev->dev, "I2C region already claimed\n");
return -EBUSY;
}
base = ioremap(iomem->start, resource_size(iomem));
base = devm_request_and_ioremap(&pdev->dev, res);
if (!base) {
dev_err(&pdev->dev, "Cannot ioremap I2C region\n");
return -ENOMEM;
dev_err(&pdev->dev, "Cannot request/ioremap I2C registers\n");
return -EADDRNOTAVAIL;
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(&pdev->dev, "no irq resource\n");
ret = -EINVAL;
goto err_iounmap;
return -EINVAL;
}
irq = res->start;
clk = clk_get(&pdev->dev, NULL);
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "missing controller clock");
ret = PTR_ERR(clk);
goto err_release_region;
return PTR_ERR(clk);
}
i2c_clk = clk_get(&pdev->dev, "i2c");
i2c_clk = devm_clk_get(&pdev->dev, "i2c");
if (IS_ERR(i2c_clk)) {
dev_err(&pdev->dev, "missing bus clock");
ret = PTR_ERR(i2c_clk);
goto err_clk_put;
return PTR_ERR(i2c_clk);
}
i2c_dev = kzalloc(sizeof(struct tegra_i2c_dev), GFP_KERNEL);
i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
if (!i2c_dev) {
ret = -ENOMEM;
goto err_i2c_clk_put;
dev_err(&pdev->dev, "Could not allocate struct tegra_i2c_dev");
return -ENOMEM;
}
i2c_dev->base = base;
i2c_dev->clk = clk;
i2c_dev->i2c_clk = i2c_clk;
i2c_dev->iomem = iomem;
i2c_dev->adapter.algo = &tegra_i2c_algo;
i2c_dev->irq = irq;
i2c_dev->cont_id = pdev->id;
......@@ -657,13 +671,14 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
ret = tegra_i2c_init(i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize i2c controller");
goto err_free;
return ret;
}
ret = request_irq(i2c_dev->irq, tegra_i2c_isr, 0, pdev->name, i2c_dev);
ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
tegra_i2c_isr, 0, pdev->name, i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
goto err_free;
return ret;
}
clk_prepare_enable(i2c_dev->i2c_clk);
......@@ -681,45 +696,26 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
if (ret) {
dev_err(&pdev->dev, "Failed to add I2C adapter\n");
goto err_free_irq;
clk_disable_unprepare(i2c_dev->i2c_clk);
return ret;
}
of_i2c_register_devices(&i2c_dev->adapter);
return 0;
err_free_irq:
free_irq(i2c_dev->irq, i2c_dev);
err_free:
kfree(i2c_dev);
err_i2c_clk_put:
clk_put(i2c_clk);
err_clk_put:
clk_put(clk);
err_release_region:
release_mem_region(iomem->start, resource_size(iomem));
err_iounmap:
iounmap(base);
return ret;
}
static int __devexit tegra_i2c_remove(struct platform_device *pdev)
{
struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
i2c_del_adapter(&i2c_dev->adapter);
free_irq(i2c_dev->irq, i2c_dev);
clk_put(i2c_dev->i2c_clk);
clk_put(i2c_dev->clk);
release_mem_region(i2c_dev->iomem->start,
resource_size(i2c_dev->iomem));
iounmap(i2c_dev->base);
kfree(i2c_dev);
return 0;
}
#ifdef CONFIG_PM
static int tegra_i2c_suspend(struct platform_device *pdev, pm_message_t state)
static int tegra_i2c_suspend(struct device *dev)
{
struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
i2c_lock_adapter(&i2c_dev->adapter);
i2c_dev->is_suspended = true;
......@@ -728,9 +724,9 @@ static int tegra_i2c_suspend(struct platform_device *pdev, pm_message_t state)
return 0;
}
static int tegra_i2c_resume(struct platform_device *pdev)
static int tegra_i2c_resume(struct device *dev)
{
struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
int ret;
i2c_lock_adapter(&i2c_dev->adapter);
......@@ -748,6 +744,11 @@ static int tegra_i2c_resume(struct platform_device *pdev)
return 0;
}
static SIMPLE_DEV_PM_OPS(tegra_i2c_pm, tegra_i2c_suspend, tegra_i2c_resume);
#define TEGRA_I2C_PM (&tegra_i2c_pm)
#else
#define TEGRA_I2C_PM NULL
#endif
#if defined(CONFIG_OF)
......@@ -758,21 +759,16 @@ static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
{},
};
MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
#else
#define tegra_i2c_of_match NULL
#endif
static struct platform_driver tegra_i2c_driver = {
.probe = tegra_i2c_probe,
.remove = __devexit_p(tegra_i2c_remove),
#ifdef CONFIG_PM
.suspend = tegra_i2c_suspend,
.resume = tegra_i2c_resume,
#endif
.driver = {
.name = "tegra-i2c",
.owner = THIS_MODULE,
.of_match_table = tegra_i2c_of_match,
.of_match_table = of_match_ptr(tegra_i2c_of_match),
.pm = TEGRA_I2C_PM,
},
};
......
......@@ -83,7 +83,7 @@ timberdale_xiic_platform_data = {
static __devinitdata struct ocores_i2c_platform_data
timberdale_ocores_platform_data = {
.regstep = 4,
.reg_shift = 2,
.clock_khz = 62500,
.devices = timberdale_i2c_board_info,
.num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
......
......@@ -12,7 +12,8 @@
#define _LINUX_I2C_OCORES_H
struct ocores_i2c_platform_data {
u32 regstep; /* distance between registers */
u32 reg_shift; /* register offset shift value */
u32 reg_io_width; /* register io read/write width */
u32 clock_khz; /* input clock in kHz */
u8 num_devices; /* number of devices in the devices list */
struct i2c_board_info const *devices; /* devices connected to the bus */
......
......@@ -5,8 +5,8 @@
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*/
#ifndef __PLAT_I2C_H
#define __PLAT_I2C_H
#ifndef __PDATA_I2C_NOMADIK_H
#define __PDATA_I2C_NOMADIK_H
enum i2c_freq_mode {
I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */
......@@ -36,4 +36,4 @@ struct nmk_i2c_controller {
enum i2c_freq_mode sm;
};
#endif /* __PLAT_I2C_H */
#endif /* __PDATA_I2C_NOMADIK_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册