提交 a371a07d 编写于 作者: R raghavendra.koushik@neterion.com 提交者: Jeff Garzik

[PATCH] S2io: New link handling scheme for Xframe II

Hi,
The below patch implements a new "Link state change handling"
scheme supported by the Xframe II adapter. It also bumps up the
driver version to 2.0.2.0.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
上级 b6e3f982
......@@ -167,7 +167,11 @@ typedef struct _XENA_dev_config {
u8 unused4[0x08];
u64 gpio_int_reg;
#define GPIO_INT_REG_LINK_DOWN BIT(1)
#define GPIO_INT_REG_LINK_UP BIT(2)
u64 gpio_int_mask;
#define GPIO_INT_MASK_LINK_DOWN BIT(1)
#define GPIO_INT_MASK_LINK_UP BIT(2)
u64 gpio_alarms;
u8 unused5[0x38];
......@@ -279,8 +283,10 @@ typedef struct _XENA_dev_config {
u64 gpio_control;
#define GPIO_CTRL_GPIO_0 BIT(8)
u64 misc_control;
#define MISC_LINK_STABILITY_PRD(val) vBIT(val,29,3)
u8 unused7_1[0x240 - 0x200];
u8 unused7_1[0x240 - 0x208];
u64 wreq_split_mask;
#define WREQ_SPLIT_MASK_SET_MASK(val) vBIT(val, 52, 12)
......
......@@ -67,7 +67,7 @@
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
static char s2io_driver_version[] = "Version 1.7.7";
static char s2io_driver_version[] = "Version 2.0.2.0";
static inline int RXD_IS_UP2DT(RxD_t *rxdp)
{
......@@ -1456,8 +1456,28 @@ static int init_nic(struct s2io_nic *nic)
writeq(val64, &bar0->wreq_split_mask);
}
/* Setting Link stability period to 64 ms */
if (nic->device_type == XFRAME_II_DEVICE) {
val64 = MISC_LINK_STABILITY_PRD(3);
writeq(val64, &bar0->misc_control);
}
return SUCCESS;
}
#define LINK_UP_DOWN_INTERRUPT 1
#define MAC_RMAC_ERR_TIMER 2
#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE)
#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER
#else
int s2io_link_fault_indication(nic_t *nic)
{
if (nic->device_type == XFRAME_II_DEVICE)
return LINK_UP_DOWN_INTERRUPT;
else
return MAC_RMAC_ERR_TIMER;
}
#endif
/**
* en_dis_able_nic_intrs - Enable or Disable the interrupts
......@@ -1485,11 +1505,22 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
/*
* Disabled all PCIX, Flash, MDIO, IIC and GPIO
* If Hercules adapter enable GPIO otherwise
* disabled all PCIX, Flash, MDIO, IIC and GPIO
* interrupts for now.
* TODO
*/
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
if (s2io_link_fault_indication(nic) ==
LINK_UP_DOWN_INTERRUPT ) {
temp64 = readq(&bar0->pic_int_mask);
temp64 &= ~((u64) PIC_INT_GPIO);
writeq(temp64, &bar0->pic_int_mask);
temp64 = readq(&bar0->gpio_int_mask);
temp64 &= ~((u64) GPIO_INT_MASK_LINK_UP);
writeq(temp64, &bar0->gpio_int_mask);
} else {
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
}
/*
* No MSI Support is available presently, so TTI and
* RTI interrupts are also disabled.
......@@ -1580,17 +1611,8 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
writeq(temp64, &bar0->general_int_mask);
/*
* All MAC block error interrupts are disabled for now
* except the link status change interrupt.
* TODO
*/
val64 = MAC_INT_STATUS_RMAC_INT;
temp64 = readq(&bar0->mac_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->mac_int_mask);
val64 = readq(&bar0->mac_rmac_err_mask);
val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT);
writeq(val64, &bar0->mac_rmac_err_mask);
} else if (flag == DISABLE_INTRS) {
/*
* Disable MAC Intrs in the general intr mask register
......@@ -1879,8 +1901,10 @@ static int start_nic(struct s2io_nic *nic)
}
/* Enable select interrupts */
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
RX_MAC_INTR | MC_INTR;
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR;
interruptible |= TX_PIC_INTR | RX_PIC_INTR;
interruptible |= TX_MAC_INTR | RX_MAC_INTR;
en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
/*
......@@ -2004,8 +2028,9 @@ static void stop_nic(struct s2io_nic *nic)
config = &nic->config;
/* Disable all interrupts */
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
RX_MAC_INTR | MC_INTR;
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR;
interruptible |= TX_PIC_INTR | RX_PIC_INTR;
interruptible |= TX_MAC_INTR | RX_MAC_INTR;
en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
/* Disable PRCs */
......@@ -2618,10 +2643,12 @@ static void alarm_intr_handler(struct s2io_nic *nic)
register u64 val64 = 0, err_reg = 0;
/* Handling link status change error Intr */
err_reg = readq(&bar0->mac_rmac_err_reg);
writeq(err_reg, &bar0->mac_rmac_err_reg);
if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
schedule_work(&nic->set_link_task);
if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
err_reg = readq(&bar0->mac_rmac_err_reg);
writeq(err_reg, &bar0->mac_rmac_err_reg);
if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
schedule_work(&nic->set_link_task);
}
}
/* Handling Ecc errors */
......@@ -2947,7 +2974,7 @@ int s2io_open(struct net_device *dev)
* Nic is initialized
*/
netif_carrier_off(dev);
sp->last_link_state = 0; /* Unkown link state */
sp->last_link_state = LINK_DOWN;
/* Initialize H/W and enable interrupts */
if (s2io_card_up(sp)) {
......@@ -3159,6 +3186,53 @@ s2io_alarm_handle(unsigned long data)
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
}
static void s2io_txpic_intr_handle(nic_t *sp)
{
XENA_dev_config_t *bar0 = (XENA_dev_config_t *) sp->bar0;
u64 val64;
val64 = readq(&bar0->pic_int_status);
if (val64 & PIC_INT_GPIO) {
val64 = readq(&bar0->gpio_int_reg);
if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
(val64 & GPIO_INT_REG_LINK_UP)) {
val64 |= GPIO_INT_REG_LINK_DOWN;
val64 |= GPIO_INT_REG_LINK_UP;
writeq(val64, &bar0->gpio_int_reg);
goto masking;
}
if (((sp->last_link_state == LINK_UP) &&
(val64 & GPIO_INT_REG_LINK_DOWN)) ||
((sp->last_link_state == LINK_DOWN) &&
(val64 & GPIO_INT_REG_LINK_UP))) {
val64 = readq(&bar0->gpio_int_mask);
val64 |= GPIO_INT_MASK_LINK_DOWN;
val64 |= GPIO_INT_MASK_LINK_UP;
writeq(val64, &bar0->gpio_int_mask);
s2io_set_link((unsigned long)sp);
}
masking:
if (sp->last_link_state == LINK_UP) {
/*enable down interrupt */
val64 = readq(&bar0->gpio_int_mask);
/* unmasks link down intr */
val64 &= ~GPIO_INT_MASK_LINK_DOWN;
/* masks link up intr */
val64 |= GPIO_INT_MASK_LINK_UP;
writeq(val64, &bar0->gpio_int_mask);
} else {
/*enable UP Interrupt */
val64 = readq(&bar0->gpio_int_mask);
/* unmasks link up interrupt */
val64 &= ~GPIO_INT_MASK_LINK_UP;
/* masks link down interrupt */
val64 |= GPIO_INT_MASK_LINK_DOWN;
writeq(val64, &bar0->gpio_int_mask);
}
}
}
/**
* s2io_isr - ISR handler of the device .
* @irq: the irq of the device.
......@@ -3241,6 +3315,8 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
tx_intr_handler(&mac_control->fifos[i]);
}
if (reason & GEN_INTR_TXPIC)
s2io_txpic_intr_handle(sp);
/*
* If the Rx buffer count is below the panic threshold then
* reallocate the buffers from the interrupt handler itself,
......@@ -4644,11 +4720,13 @@ static void s2io_set_link(unsigned long data)
}
subid = nic->pdev->subsystem_device;
/*
* Allow a small delay for the NICs self initiated
* cleanup to complete.
*/
msleep(100);
if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
/*
* Allow a small delay for the NICs self initiated
* cleanup to complete.
*/
msleep(100);
}
val64 = readq(&bar0->adapter_status);
if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
......@@ -4666,13 +4744,16 @@ static void s2io_set_link(unsigned long data)
val64 |= ADAPTER_LED_ON;
writeq(val64, &bar0->adapter_control);
}
val64 = readq(&bar0->adapter_status);
if (!LINK_IS_UP(val64)) {
DBG_PRINT(ERR_DBG, "%s:", dev->name);
DBG_PRINT(ERR_DBG, " Link down");
DBG_PRINT(ERR_DBG, "after ");
DBG_PRINT(ERR_DBG, "enabling ");
DBG_PRINT(ERR_DBG, "device \n");
if (s2io_link_fault_indication(nic) ==
MAC_RMAC_ERR_TIMER) {
val64 = readq(&bar0->adapter_status);
if (!LINK_IS_UP(val64)) {
DBG_PRINT(ERR_DBG, "%s:", dev->name);
DBG_PRINT(ERR_DBG, " Link down");
DBG_PRINT(ERR_DBG, "after ");
DBG_PRINT(ERR_DBG, "enabling ");
DBG_PRINT(ERR_DBG, "device \n");
}
}
if (nic->device_enabled_once == FALSE) {
nic->device_enabled_once = TRUE;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册