提交 a2ea14d7 编写于 作者: L Lendacky, Thomas 提交者: David S. Miller

amd-xgbe: Checkpatch driver fixes

This patch contains fixes identified by checkpatch when run with the
strict option.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e6f0562f
......@@ -271,7 +271,6 @@
#define DMA_PBL_X8_DISABLE 0x00
#define DMA_PBL_X8_ENABLE 0x01
/* MAC register offsets */
#define MAC_TCR 0x0000
#define MAC_RCR 0x0004
......@@ -792,7 +791,6 @@
#define MTL_Q_DISABLED 0x00
#define MTL_Q_ENABLED 0x02
/* MTL traffic class register offsets
* Multiple traffic classes can be active. The first class has registers
* that begin at 0x1100. Each subsequent queue has registers that
......@@ -815,7 +813,6 @@
#define MTL_TSA_SP 0x00
#define MTL_TSA_ETS 0x02
/* PCS MMD select register offset
* The MMD select register is used for accessing PCS registers
* when the underlying APB3 interface is using indirect addressing.
......@@ -825,7 +822,6 @@
*/
#define PCS_MMD_SELECT 0xff
/* Descriptor/Packet entry bit positions and sizes */
#define RX_PACKET_ERRORS_CRC_INDEX 2
#define RX_PACKET_ERRORS_CRC_WIDTH 1
......@@ -929,7 +925,6 @@
#define MDIO_AN_COMP_STAT 0x0030
#endif
/* Bit setting and getting macros
* The get macro will extract the current bit field value from within
* the variable
......@@ -957,7 +952,6 @@ do { \
((0x1 << (_width)) - 1)) << (_index))); \
} while (0)
/* Bit setting and getting macros based on register fields
* The get macro uses the bit field definitions formed using the input
* names to extract the current bit field value from within the
......@@ -986,7 +980,6 @@ do { \
_prefix##_##_field##_INDEX, \
_prefix##_##_field##_WIDTH, (_val))
/* Macros for reading or writing registers
* The ioread macros will get bit fields or full values using the
* register definitions formed using the input names
......@@ -1014,7 +1007,6 @@ do { \
XGMAC_IOWRITE((_pdata), _reg, reg_val); \
} while (0)
/* Macros for reading or writing MTL queue or traffic class registers
* Similar to the standard read and write macros except that the
* base register value is calculated by the queue or traffic class number
......@@ -1041,7 +1033,6 @@ do { \
XGMAC_MTL_IOWRITE((_pdata), (_n), _reg, reg_val); \
} while (0)
/* Macros for reading or writing DMA channel registers
* Similar to the standard read and write macros except that the
* base register value is obtained from the ring
......@@ -1066,7 +1057,6 @@ do { \
XGMAC_DMA_IOWRITE((_channel), _reg, reg_val); \
} while (0)
/* Macros for building, reading or writing register values or bits
* within the register values of XPCS registers.
*/
......@@ -1076,7 +1066,6 @@ do { \
#define XPCS_IOREAD(_pdata, _off) \
ioread32((_pdata)->xpcs_regs + (_off))
/* Macros for building, reading or writing register values or bits
* using MDIO. Different from above because of the use of standardized
* Linux include values. No shifting is performed with the bit
......
......@@ -120,7 +120,6 @@
#include "xgbe.h"
#include "xgbe-common.h"
static int xgbe_dcb_ieee_getets(struct net_device *netdev,
struct ieee_ets *ets)
{
......
......@@ -121,7 +121,6 @@
#include "xgbe.h"
#include "xgbe-common.h"
static ssize_t xgbe_common_read(char __user *buffer, size_t count,
loff_t *ppos, unsigned int value)
{
......
......@@ -117,7 +117,6 @@
#include "xgbe.h"
#include "xgbe-common.h"
static void xgbe_unmap_skb(struct xgbe_prv_data *, struct xgbe_ring_data *);
static void xgbe_free_ring(struct xgbe_prv_data *pdata,
......@@ -524,11 +523,8 @@ static void xgbe_realloc_skb(struct xgbe_channel *channel)
/* Allocate skb & assign to each rdesc */
skb = dev_alloc_skb(pdata->rx_buf_size);
if (skb == NULL) {
netdev_alert(pdata->netdev,
"failed to allocate skb\n");
if (skb == NULL)
break;
}
skb_dma = dma_map_single(pdata->dev, skb->data,
pdata->rx_buf_size, DMA_FROM_DEVICE);
if (dma_mapping_error(pdata->dev, skb_dma)) {
......
......@@ -122,7 +122,6 @@
#include "xgbe.h"
#include "xgbe-common.h"
static unsigned int xgbe_usec_to_riwt(struct xgbe_prv_data *pdata,
unsigned int usec)
{
......
......@@ -126,7 +126,6 @@
#include "xgbe.h"
#include "xgbe-common.h"
static int xgbe_poll(struct napi_struct *, int);
static void xgbe_set_rx_mode(struct net_device *);
......
......@@ -121,7 +121,6 @@
#include "xgbe.h"
#include "xgbe-common.h"
struct xgbe_stats {
char stat_string[ETH_GSTRING_LEN];
int stat_size;
......@@ -173,6 +172,7 @@ static const struct xgbe_stats xgbe_gstring_stats[] = {
XGMAC_MMC_STAT("rx_watchdog_errors", rxwatchdogerror),
XGMAC_MMC_STAT("rx_pause_frames", rxpauseframes),
};
#define XGBE_STATS_COUNT ARRAY_SIZE(xgbe_gstring_stats)
static void xgbe_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
......
......@@ -128,7 +128,6 @@
#include "xgbe.h"
#include "xgbe-common.h"
MODULE_AUTHOR("Tom Lendacky <thomas.lendacky@amd.com>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(XGBE_DRV_VERSION);
......
......@@ -123,7 +123,6 @@
#include "xgbe.h"
#include "xgbe-common.h"
static int xgbe_mdio_read(struct mii_bus *mii, int prtad, int mmd_reg)
{
struct xgbe_prv_data *pdata = mii->priv;
......
......@@ -122,7 +122,6 @@
#include "xgbe.h"
#include "xgbe-common.h"
static cycle_t xgbe_cc_read(const struct cyclecounter *cc)
{
struct xgbe_prv_data *pdata = container_of(cc,
......
......@@ -128,7 +128,6 @@
#include <linux/net_tstamp.h>
#include <net/dcbnl.h>
#define XGBE_DRV_NAME "amd-xgbe"
#define XGBE_DRV_VERSION "1.0.0-a"
#define XGBE_DRV_DESC "AMD 10 Gigabit Ethernet Driver"
......@@ -198,7 +197,6 @@
((_ring)->rdata + \
((_idx) & ((_ring)->rdesc_count - 1)))
/* Default coalescing parameters */
#define XGMAC_INIT_DMA_TX_USECS 50
#define XGMAC_INIT_DMA_TX_FRAMES 25
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册