提交 9e03fdfd 编写于 作者: J Javier Cardona 提交者: John W. Linville

mac80211: Update mesh config IE to 11s draft 3.02

The mesh config information element has changed significantly since draft 1.08
This patch brings it up to date.

Thanks to Sam Leffler and Rui Paulo for identifying this.
Signed-off-by: NJavier Cardona <javier@cozybit.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 90d6f928
...@@ -115,7 +115,7 @@ ...@@ -115,7 +115,7 @@
#define IEEE80211_MAX_SSID_LEN 32 #define IEEE80211_MAX_SSID_LEN 32
#define IEEE80211_MAX_MESH_ID_LEN 32 #define IEEE80211_MAX_MESH_ID_LEN 32
#define IEEE80211_MESH_CONFIG_LEN 19 #define IEEE80211_MESH_CONFIG_LEN 24
#define IEEE80211_QOS_CTL_LEN 2 #define IEEE80211_QOS_CTL_LEN 2
#define IEEE80211_QOS_CTL_TID_MASK 0x000F #define IEEE80211_QOS_CTL_TID_MASK 0x000F
......
...@@ -367,6 +367,10 @@ struct ieee80211_if_mesh { ...@@ -367,6 +367,10 @@ struct ieee80211_if_mesh {
u8 mesh_pm_id[4]; u8 mesh_pm_id[4];
/* Congestion Control Mode Identifier */ /* Congestion Control Mode Identifier */
u8 mesh_cc_id[4]; u8 mesh_cc_id[4];
/* Synchronization Protocol Identifier */
u8 mesh_sp_id[4];
/* Authentication Protocol Identifier */
u8 mesh_auth_id[4];
/* Local mesh Destination Sequence Number */ /* Local mesh Destination Sequence Number */
u32 dsn; u32 dsn;
/* Last used PREQ ID */ /* Last used PREQ ID */
......
...@@ -18,8 +18,11 @@ ...@@ -18,8 +18,11 @@
#define PP_OFFSET 1 /* Path Selection Protocol */ #define PP_OFFSET 1 /* Path Selection Protocol */
#define PM_OFFSET 5 /* Path Selection Metric */ #define PM_OFFSET 5 /* Path Selection Metric */
#define CC_OFFSET 9 /* Congestion Control Mode */ #define CC_OFFSET 9 /* Congestion Control Mode */
#define CAPAB_OFFSET 17 #define SP_OFFSET 13 /* Synchronization Protocol */
#define ACCEPT_PLINKS 0x80 #define AUTH_OFFSET 17 /* Authentication Protocol */
#define CAPAB_OFFSET 22
#define CAPAB_ACCEPT_PLINKS 0x80
#define CAPAB_FORWARDING 0x10
#define TMR_RUNNING_HK 0 #define TMR_RUNNING_HK 0
#define TMR_RUNNING_MP 1 #define TMR_RUNNING_MP 1
...@@ -84,7 +87,9 @@ bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_dat ...@@ -84,7 +87,9 @@ bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_dat
memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 && memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 && memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0) memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0 &&
memcmp(ifmsh->mesh_sp_id, ie->mesh_config + SP_OFFSET, 4) == 0 &&
memcmp(ifmsh->mesh_auth_id, ie->mesh_config + AUTH_OFFSET, 4) == 0)
return true; return true;
return false; return false;
...@@ -97,7 +102,7 @@ bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_dat ...@@ -97,7 +102,7 @@ bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_dat
*/ */
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
{ {
return (*(ie->mesh_config + CAPAB_OFFSET) & ACCEPT_PLINKS) != 0; return (*(ie->mesh_config + CAPAB_OFFSET) & CAPAB_ACCEPT_PLINKS) != 0;
} }
/** /**
...@@ -123,11 +128,18 @@ void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) ...@@ -123,11 +128,18 @@ void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
void mesh_ids_set_default(struct ieee80211_if_mesh *sta) void mesh_ids_set_default(struct ieee80211_if_mesh *sta)
{ {
u8 def_id[4] = {0x00, 0x0F, 0xAC, 0xff}; u8 oui[3] = {0x00, 0x0F, 0xAC};
memcpy(sta->mesh_pp_id, def_id, 4); memcpy(sta->mesh_pp_id, oui, sizeof(oui));
memcpy(sta->mesh_pm_id, def_id, 4); memcpy(sta->mesh_pm_id, oui, sizeof(oui));
memcpy(sta->mesh_cc_id, def_id, 4); memcpy(sta->mesh_cc_id, oui, sizeof(oui));
memcpy(sta->mesh_sp_id, oui, sizeof(oui));
memcpy(sta->mesh_auth_id, oui, sizeof(oui));
sta->mesh_pp_id[sizeof(oui)] = 0;
sta->mesh_pm_id[sizeof(oui)] = 0;
sta->mesh_cc_id[sizeof(oui)] = 0xff;
sta->mesh_sp_id[sizeof(oui)] = 0xff;
sta->mesh_auth_id[sizeof(oui)] = 0x0;
} }
int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
...@@ -245,7 +257,7 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) ...@@ -245,7 +257,7 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
if (sdata->u.mesh.mesh_id_len) if (sdata->u.mesh.mesh_id_len)
memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len); memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len);
pos = skb_put(skb, 21); pos = skb_put(skb, 2 + IEEE80211_MESH_CONFIG_LEN);
*pos++ = WLAN_EID_MESH_CONFIG; *pos++ = WLAN_EID_MESH_CONFIG;
*pos++ = IEEE80211_MESH_CONFIG_LEN; *pos++ = IEEE80211_MESH_CONFIG_LEN;
/* Version */ /* Version */
...@@ -263,15 +275,22 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) ...@@ -263,15 +275,22 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
memcpy(pos, sdata->u.mesh.mesh_cc_id, 4); memcpy(pos, sdata->u.mesh.mesh_cc_id, 4);
pos += 4; pos += 4;
/* Channel precedence: /* Synchronization protocol identifier */
* Not running simple channel unification protocol memcpy(pos, sdata->u.mesh.mesh_sp_id, 4);
*/
memset(pos, 0x00, 4);
pos += 4; pos += 4;
/* Authentication Protocol identifier */
memcpy(pos, sdata->u.mesh.mesh_auth_id, 4);
pos += 4;
/* Mesh Formation Info */
memset(pos, 0x00, 1);
pos += 1;
/* Mesh capability */ /* Mesh capability */
sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata); sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
*pos++ = sdata->u.mesh.accepting_plinks ? ACCEPT_PLINKS : 0x00; *pos = CAPAB_FORWARDING;
*pos++ |= sdata->u.mesh.accepting_plinks ? CAPAB_ACCEPT_PLINKS : 0x00;
*pos++ = 0x00; *pos++ = 0x00;
return; return;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册