powerpc: Merge in the ppc64 version of the prom code.

This brings in the ppc64 version of prom_init.c, prom.c and btext.c
and makes them work for ppc32.  This also brings in the new calling
convention, where the first entry to the kernel (with r5 != 0) goes
to the prom_init code, which then restarts from the beginning (with
r5 == 0) after it has done its stuff.

For now this also brings in the ppc32 version of setup.c.  It also
merges lmb.h.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/kernel/Makefile

@@ -5,10 +5,11 @@
 ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS	+= -mno-minimal-toc
 endif
-
 ifeq ($(CONFIG_PPC32),y)
-extra-$(CONFIG_PPC_STD_MMU)	:= head.o
+CFLAGS_prom_init.o      += -fPIC
 endif
+
+extra-$(CONFIG_PPC_STD_MMU)	:= head.o
 extra-$(CONFIG_PPC64)		:= head_64.o
 extra-$(CONFIG_40x)		:= head_4xx.o
 extra-$(CONFIG_44x)		:= head_44x.o
@@ -18,13 +19,15 @@ extra-$(CONFIG_6xx)		+= idle_6xx.o
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
 extra-y				+= vmlinux.lds
 
-obj-y				:= traps.o
-obj-$(CONFIG_PPC32)		+= semaphore.o process.o
+obj-y				:= traps.o prom.o semaphore.o
+obj-$(CONFIG_PPC32)		+= setup.o process.o
 obj-$(CONFIG_PPC64)		+= idle_power4.o
 ifeq ($(CONFIG_PPC32),y)
+obj-$(CONFIG_PPC_OF)		+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 endif
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
+obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 
 ifeq ($(CONFIG_PPC_ISERIES),y)
 arch/powerpc/kernel/head_64.o: arch/powerpc/platforms/iseries/lparmap.s

arch/powerpc/kernel/head.S

@@ -134,11 +134,13 @@ __start:
  * because OF may have I/O devices mapped into that area
  * (particularly on CHRP).
  */
-	mr	r31,r3			/* save parameters */
+	cmpwi	0,r5,0
+	beq	1f
+	bl	prom_init
+	trap
+
+1:	mr	r31,r3			/* save parameters */
 	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
 	li	r24,0			/* cpu # */
 
 /*
@@ -204,8 +206,7 @@ __after_mmu_off:
  * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
  * the exception vectors at 0 (and therefore this copy
  * overwrites OF's exception vectors with our own).
- * If the MMU is already turned on, we copy stuff to KERNELBASE,
- * otherwise we copy it to 0.
+ * The MMU is off at this point.
  */
 	bl	reloc_offset
 	mr	r26,r3
@@ -1187,9 +1188,6 @@ start_here:
  */
 	mr	r3,r31
 	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
 	bl	machine_init
 	bl	MMU_init
 

arch/powerpc/kernel/ppc_ksyms.c

@@ -212,36 +212,6 @@ EXPORT_SYMBOL(_machine);
 EXPORT_SYMBOL(sys_ctrler);
 EXPORT_SYMBOL(pmac_newworld);
 #endif
-#ifdef CONFIG_PPC_OF
-EXPORT_SYMBOL(find_devices);
-EXPORT_SYMBOL(find_type_devices);
-EXPORT_SYMBOL(find_compatible_devices);
-EXPORT_SYMBOL(find_path_device);
-EXPORT_SYMBOL(device_is_compatible);
-EXPORT_SYMBOL(machine_is_compatible);
-EXPORT_SYMBOL(find_all_nodes);
-EXPORT_SYMBOL(get_property);
-EXPORT_SYMBOL(request_OF_resource);
-EXPORT_SYMBOL(release_OF_resource);
-EXPORT_SYMBOL(pci_busdev_to_OF_node);
-EXPORT_SYMBOL(pci_device_to_OF_node);
-EXPORT_SYMBOL(pci_device_from_OF_node);
-EXPORT_SYMBOL(of_find_node_by_name);
-EXPORT_SYMBOL(of_find_node_by_type);
-EXPORT_SYMBOL(of_find_compatible_node);
-EXPORT_SYMBOL(of_find_node_by_path);
-EXPORT_SYMBOL(of_find_all_nodes);
-EXPORT_SYMBOL(of_get_parent);
-EXPORT_SYMBOL(of_get_next_child);
-EXPORT_SYMBOL(of_node_get);
-EXPORT_SYMBOL(of_node_put);
-#endif /* CONFIG_PPC_OF */
-#if defined(CONFIG_BOOTX_TEXT)
-EXPORT_SYMBOL(btext_update_display);
-#endif
-#if defined(CONFIG_SCSI) && defined(CONFIG_PPC_PMAC)
-EXPORT_SYMBOL(note_scsi_host);
-#endif
 #ifdef CONFIG_VT
 EXPORT_SYMBOL(kd_mksound);
 #endif

arch/powerpc/kernel/setup.c

+/*
+ * Common prep/pmac/chrp boot and setup code.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/ide.h>
+#include <linux/tty.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/console.h>
+
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/bootinfo.h>
+#include <asm/setup.h>
+#include <asm/amigappc.h>
+#include <asm/smp.h>
+#include <asm/elf.h>
+#include <asm/cputable.h>
+#include <asm/bootx.h>
+#include <asm/btext.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/pmac_feature.h>
+#include <asm/sections.h>
+#include <asm/nvram.h>
+#include <asm/xmon.h>
+#include <asm/ocp.h>
+
+#define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \
+		      defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
+		      defined(CONFIG_PPC_MPC52xx))
+
+#if USES_PPC_SYS
+#include <asm/ppc_sys.h>
+#endif
+
+#if defined CONFIG_KGDB
+#include <asm/kgdb.h>
+#endif
+
+extern void platform_init(void);
+extern void bootx_init(unsigned long r4, unsigned long phys);
+
+extern void ppc6xx_idle(void);
+extern void power4_idle(void);
+
+boot_infos_t *boot_infos;
+struct ide_machdep_calls ppc_ide_md;
+
+/* Used with the BI_MEMSIZE bootinfo parameter to store the memory
+   size value reported by the boot loader. */
+unsigned long boot_mem_size;
+
+unsigned long ISA_DMA_THRESHOLD;
+unsigned int DMA_MODE_READ;
+unsigned int DMA_MODE_WRITE;
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+int _machine = 0;
+
+extern void prep_init(void);
+extern void pmac_init(void);
+extern void chrp_init(void);
+
+dev_t boot_dev;
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+#ifdef CONFIG_MAGIC_SYSRQ
+unsigned long SYSRQ_KEY = 0x54;
+#endif /* CONFIG_MAGIC_SYSRQ */
+
+#ifdef CONFIG_VGA_CONSOLE
+unsigned long vgacon_remap_base;
+#endif
+
+struct machdep_calls ppc_md;
+
+/*
+ * These are used in binfmt_elf.c to put aux entries on the stack
+ * for each elf executable being started.
+ */
+int dcache_bsize;
+int icache_bsize;
+int ucache_bsize;
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_FB_VGA16) || \
+    defined(CONFIG_FB_VGA16_MODULE) || defined(CONFIG_FB_VESA)
+struct screen_info screen_info = {
+	0, 25,			/* orig-x, orig-y */
+	0,			/* unused */
+	0,			/* orig-video-page */
+	0,			/* orig-video-mode */
+	80,			/* orig-video-cols */
+	0,0,0,			/* ega_ax, ega_bx, ega_cx */
+	25,			/* orig-video-lines */
+	1,			/* orig-video-isVGA */
+	16			/* orig-video-points */
+};
+#endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */
+
+void machine_restart(char *cmd)
+{
+#ifdef CONFIG_NVRAM
+	nvram_sync();
+#endif
+	ppc_md.restart(cmd);
+}
+
+void machine_power_off(void)
+{
+#ifdef CONFIG_NVRAM
+	nvram_sync();
+#endif
+	ppc_md.power_off();
+}
+
+void machine_halt(void)
+{
+#ifdef CONFIG_NVRAM
+	nvram_sync();
+#endif
+	ppc_md.halt();
+}
+
+void (*pm_power_off)(void) = machine_power_off;
+
+#ifdef CONFIG_TAU
+extern u32 cpu_temp(unsigned long cpu);
+extern u32 cpu_temp_both(unsigned long cpu);
+#endif /* CONFIG_TAU */
+
+int show_cpuinfo(struct seq_file *m, void *v)
+{
+	int i = (int) v - 1;
+	int err = 0;
+	unsigned int pvr;
+	unsigned short maj, min;
+	unsigned long lpj;
+
+	if (i >= NR_CPUS) {
+		/* Show summary information */
+#ifdef CONFIG_SMP
+		unsigned long bogosum = 0;
+		for (i = 0; i < NR_CPUS; ++i)
+			if (cpu_online(i))
+				bogosum += cpu_data[i].loops_per_jiffy;
+		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
+			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
+#endif /* CONFIG_SMP */
+
+		if (ppc_md.show_cpuinfo != NULL)
+			err = ppc_md.show_cpuinfo(m);
+		return err;
+	}
+
+#ifdef CONFIG_SMP
+	if (!cpu_online(i))
+		return 0;
+	pvr = cpu_data[i].pvr;
+	lpj = cpu_data[i].loops_per_jiffy;
+#else
+	pvr = mfspr(SPRN_PVR);
+	lpj = loops_per_jiffy;
+#endif
+
+	seq_printf(m, "processor\t: %d\n", i);
+	seq_printf(m, "cpu\t\t: ");
+
+	if (cur_cpu_spec->pvr_mask)
+		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
+	else
+		seq_printf(m, "unknown (%08x)", pvr);
+#ifdef CONFIG_ALTIVEC
+	if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
+		seq_printf(m, ", altivec supported");
+#endif
+	seq_printf(m, "\n");
+
+#ifdef CONFIG_TAU
+	if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
+#ifdef CONFIG_TAU_AVERAGE
+		/* more straightforward, but potentially misleading */
+		seq_printf(m,  "temperature \t: %u C (uncalibrated)\n",
+			   cpu_temp(i));
+#else
+		/* show the actual temp sensor range */
+		u32 temp;
+		temp = cpu_temp_both(i);
+		seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
+			   temp & 0xff, temp >> 16);
+#endif
+	}
+#endif /* CONFIG_TAU */
+
+	if (ppc_md.show_percpuinfo != NULL) {
+		err = ppc_md.show_percpuinfo(m, i);
+		if (err)
+			return err;
+	}
+
+	/* If we are a Freescale core do a simple check so
+	 * we dont have to keep adding cases in the future */
+	if ((PVR_VER(pvr) & 0x8000) == 0x8000) {
+		maj = PVR_MAJ(pvr);
+		min = PVR_MIN(pvr);
+	} else {
+		switch (PVR_VER(pvr)) {
+			case 0x0020:	/* 403 family */
+				maj = PVR_MAJ(pvr) + 1;
+				min = PVR_MIN(pvr);
+				break;
+			case 0x1008:	/* 740P/750P ?? */
+				maj = ((pvr >> 8) & 0xFF) - 1;
+				min = pvr & 0xFF;
+				break;
+			default:
+				maj = (pvr >> 8) & 0xFF;
+				min = pvr & 0xFF;
+				break;
+		}
+	}
+
+	seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
+		   maj, min, PVR_VER(pvr), PVR_REV(pvr));
+
+	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+		   lpj / (500000/HZ), (lpj / (5000/HZ)) % 100);
+
+#if USES_PPC_SYS
+	if (cur_ppc_sys_spec->ppc_sys_name)
+		seq_printf(m, "chipset\t\t: %s\n",
+			cur_ppc_sys_spec->ppc_sys_name);
+#endif
+
+#ifdef CONFIG_SMP
+	seq_printf(m, "\n");
+#endif
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	int i = *pos;
+
+	return i <= NR_CPUS? (void *) (i + 1): NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+	.start =c_start,
+	.next =	c_next,
+	.stop =	c_stop,
+	.show =	show_cpuinfo,
+};
+
+/*
+ * We're called here very early in the boot.  We determine the machine
+ * type and call the appropriate low-level setup functions.
+ *  -- Cort <cort@fsmlabs.com>
+ *
+ * Note that the kernel may be running at an address which is different
+ * from the address that it was linked at, so we must use RELOC/PTRRELOC
+ * to access static data (including strings).  -- paulus
+ */
+unsigned long __init early_init(unsigned long dt_ptr)
+{
+	unsigned long offset = reloc_offset();
+
+	reloc_got2(offset);
+
+	/*
+	 * Identify the CPU type and fix up code sections
+	 * that depend on which cpu we have.
+	 */
+	identify_cpu(offset, 0);
+	do_cpu_ftr_fixups(offset);
+
+#ifdef CONFIG_BOOTX_TEXT
+	btext_prepare_BAT();
+#endif
+
+	reloc_got2(-offset);
+
+	return KERNELBASE + offset;
+}
+
+#ifdef CONFIG_PPC_OF
+/*
+ * Assume here that all clock rates are the same in a
+ * smp system.  -- Cort
+ */
+int
+of_show_percpuinfo(struct seq_file *m, int i)
+{
+	struct device_node *cpu_node;
+	u32 *fp;
+	int s;
+	
+	cpu_node = find_type_devices("cpu");
+	if (!cpu_node)
+		return 0;
+	for (s = 0; s < i && cpu_node->next; s++)
+		cpu_node = cpu_node->next;
+	fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL);
+	if (fp)
+		seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000);
+	return 0;
+}
+
+void __init
+intuit_machine_type(void)
+{
+	char *model;
+	struct device_node *root;
+	
+	/* ask the OF info if we're a chrp or pmac */
+	root = find_path_device("/");
+	if (root != 0) {
+		/* assume pmac unless proven to be chrp -- Cort */
+		_machine = _MACH_Pmac;
+		model = get_property(root, "device_type", NULL);
+		if (model && !strncmp("chrp", model, 4))
+			_machine = _MACH_chrp;
+		else {
+			model = get_property(root, "model", NULL);
+			if (model && !strncmp(model, "IBM", 3))
+				_machine = _MACH_chrp;
+		}
+	}
+}
+#endif
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+/*
+ * The PPC_MULTIPLATFORM version of platform_init...
+ */
+void __init platform_init(void)
+{
+	/* if we didn't get any bootinfo telling us what we are... */
+	if (_machine == 0) {
+		/* prep boot loader tells us if we're prep or not */
+		if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
+			_machine = _MACH_prep;
+	}
+
+#ifdef CONFIG_PPC_PREP
+	/* not much more to do here, if prep */
+	if (_machine == _MACH_prep) {
+		prep_init();
+		return;
+	}
+#endif
+
+#ifdef CONFIG_ADB
+	if (strstr(cmd_line, "adb_sync")) {
+		extern int __adb_probe_sync;
+		__adb_probe_sync = 1;
+	}
+#endif /* CONFIG_ADB */
+
+	switch (_machine) {
+#ifdef CONFIG_PPC_PMAC
+	case _MACH_Pmac:
+		pmac_init();
+		break;
+#endif
+#ifdef CONFIG_PPC_CHRP
+	case _MACH_chrp:
+		chrp_init();
+		break;
+#endif
+	}
+}
+
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+extern char *of_stdout_device;
+
+static int __init set_preferred_console(void)
+{
+	struct device_node *prom_stdout;
+	char *name;
+	int offset = 0;
+
+	if (of_stdout_device == NULL)
+		return -ENODEV;
+
+	/* The user has requested a console so this is already set up. */
+	if (strstr(saved_command_line, "console="))
+		return -EBUSY;
+
+	prom_stdout = find_path_device(of_stdout_device);
+	if (!prom_stdout)
+		return -ENODEV;
+
+	name = (char *)get_property(prom_stdout, "name", NULL);
+	if (!name)
+		return -ENODEV;
+
+	if (strcmp(name, "serial") == 0) {
+		int i;
+		u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
+		if (i > 8) {
+			switch (reg[1]) {
+				case 0x3f8:
+					offset = 0;
+					break;
+				case 0x2f8:
+					offset = 1;
+					break;
+				case 0x898:
+					offset = 2;
+					break;
+				case 0x890:
+					offset = 3;
+					break;
+				default:
+					/* We dont recognise the serial port */
+					return -ENODEV;
+			}
+		}
+	} else if (strcmp(name, "ch-a") == 0)
+		offset = 0;
+	else if (strcmp(name, "ch-b") == 0)
+		offset = 1;
+	else
+		return -ENODEV;
+	return add_preferred_console("ttyS", offset, NULL);
+}
+console_initcall(set_preferred_console);
+#endif /* CONFIG_SERIAL_CORE_CONSOLE */
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+struct bi_record *find_bootinfo(void)
+{
+	struct bi_record *rec;
+
+	rec = (struct bi_record *)_ALIGN((ulong)__bss_start+(1<<20)-1,(1<<20));
+	if ( rec->tag != BI_FIRST ) {
+		/*
+		 * This 0x10000 offset is a terrible hack but it will go away when
+		 * we have the bootloader handle all the relocation and
+		 * prom calls -- Cort
+		 */
+		rec = (struct bi_record *)_ALIGN((ulong)__bss_start+0x10000+(1<<20)-1,(1<<20));
+		if ( rec->tag != BI_FIRST )
+			return NULL;
+	}
+	return rec;
+}
+
+/*
+ * Find out what kind of machine we're on and save any data we need
+ * from the early boot process (devtree is copied on pmac by prom_init()).
+ * This is called very early on the boot process, after a minimal
+ * MMU environment has been set up but before MMU_init is called.
+ */
+void __init machine_init(unsigned long dt_ptr, unsigned long phys)
+{
+	early_init_devtree(__va(dt_ptr));
+
+#ifdef CONFIG_CMDLINE
+	strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
+#endif /* CONFIG_CMDLINE */
+
+#ifdef CONFIG_6xx
+	ppc_md.power_save = ppc6xx_idle;
+#endif
+#ifdef CONFIG_POWER4
+	ppc_md.power_save = power4_idle;
+#endif
+
+	platform_init();
+
+	if (ppc_md.progress)
+		ppc_md.progress("id mach(): done", 0x200);
+}
+
+#ifdef CONFIG_BOOKE_WDT
+/* Checks wdt=x and wdt_period=xx command-line option */
+int __init early_parse_wdt(char *p)
+{
+	if (p && strncmp(p, "0", 1) != 0)
+	       booke_wdt_enabled = 1;
+
+	return 0;
+}
+early_param("wdt", early_parse_wdt);
+
+int __init early_parse_wdt_period (char *p)
+{
+	if (p)
+		booke_wdt_period = simple_strtoul(p, NULL, 0);
+
+	return 0;
+}
+early_param("wdt_period", early_parse_wdt_period);
+#endif	/* CONFIG_BOOKE_WDT */
+
+/* Checks "l2cr=xxxx" command-line option */
+int __init ppc_setup_l2cr(char *str)
+{
+	if (cpu_has_feature(CPU_FTR_L2CR)) {
+		unsigned long val = simple_strtoul(str, NULL, 0);
+		printk(KERN_INFO "l2cr set to %lx\n", val);
+		_set_L2CR(0);		/* force invalidate by disable cache */
+		_set_L2CR(val);		/* and enable it */
+	}
+	return 1;
+}
+__setup("l2cr=", ppc_setup_l2cr);
+
+#ifdef CONFIG_GENERIC_NVRAM
+
+/* Generic nvram hooks used by drivers/char/gen_nvram.c */
+unsigned char nvram_read_byte(int addr)
+{
+	if (ppc_md.nvram_read_val)
+		return ppc_md.nvram_read_val(addr);
+	return 0xff;
+}
+EXPORT_SYMBOL(nvram_read_byte);
+
+void nvram_write_byte(unsigned char val, int addr)
+{
+	if (ppc_md.nvram_write_val)
+		ppc_md.nvram_write_val(addr, val);
+}
+EXPORT_SYMBOL(nvram_write_byte);
+
+void nvram_sync(void)
+{
+	if (ppc_md.nvram_sync)
+		ppc_md.nvram_sync();
+}
+EXPORT_SYMBOL(nvram_sync);
+
+#endif /* CONFIG_NVRAM */
+
+static struct cpu cpu_devices[NR_CPUS];
+
+int __init ppc_init(void)
+{
+	int i;
+
+	/* clear the progress line */
+	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
+
+	/* register CPU devices */
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_possible(i))
+			register_cpu(&cpu_devices[i], i, NULL);
+
+	/* call platform init */
+	if (ppc_md.init != NULL) {
+		ppc_md.init();
+	}
+	return 0;
+}
+
+arch_initcall(ppc_init);
+
+/* Warning, IO base is not yet inited */
+void __init setup_arch(char **cmdline_p)
+{
+	extern char *klimit;
+	extern void do_init_bootmem(void);
+
+	/* so udelay does something sensible, assume <= 1000 bogomips */
+	loops_per_jiffy = 500000000 / HZ;
+
+#ifdef CONFIG_BOOTX_TEXT
+	map_boot_text();
+#endif
+
+	unflatten_device_tree();
+	finish_device_tree();
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+	/* This could be called "early setup arch", it must be done
+	 * now because xmon need it
+	 */
+	if (_machine == _MACH_Pmac)
+		pmac_feature_init();	/* New cool way */
+#endif
+
+#ifdef CONFIG_XMON
+	xmon_map_scc();
+	if (strstr(cmd_line, "xmon"))
+		xmon(NULL);
+#endif /* CONFIG_XMON */
+	if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab);
+
+#if defined(CONFIG_KGDB)
+	if (ppc_md.kgdb_map_scc)
+		ppc_md.kgdb_map_scc();
+	set_debug_traps();
+	if (strstr(cmd_line, "gdb")) {
+		if (ppc_md.progress)
+			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
+		printk("kgdb breakpoint activated\n");
+		breakpoint();
+	}
+#endif
+
+	/*
+	 * Set cache line size based on type of cpu as a default.
+	 * Systems with OF can look in the properties on the cpu node(s)
+	 * for a possibly more accurate value.
+	 */
+	if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) {
+		dcache_bsize = cur_cpu_spec->dcache_bsize;
+		icache_bsize = cur_cpu_spec->icache_bsize;
+		ucache_bsize = 0;
+	} else
+		ucache_bsize = dcache_bsize = icache_bsize
+			= cur_cpu_spec->dcache_bsize;
+
+	/* reboot on panic */
+	panic_timeout = 180;
+
+	init_mm.start_code = PAGE_OFFSET;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = (unsigned long) klimit;
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
+	*cmdline_p = cmd_line;
+
+	parse_early_param();
+
+	/* set up the bootmem stuff with available memory */
+	do_init_bootmem();
+	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
+
+#ifdef CONFIG_PPC_OCP
+	/* Initialize OCP device list */
+	ocp_early_init();
+	if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
+#endif
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
+	ppc_md.setup_arch();
+	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
+
+	paging_init();
+
+	/* this is for modules since _machine can be a define -- Cort */
+	ppc_md.ppc_machine = _machine;
+}

arch/powerpc/platforms/powermac/pmac_setup.c

@@ -101,6 +101,8 @@ int ppc_override_l2cr = 0;
 int ppc_override_l2cr_value;
 int has_l2cache = 0;
 
+int pmac_newworld = 1;
+
 static int current_root_goodness = -1;
 
 extern int pmac_newworld;
@@ -355,8 +357,8 @@ static void __init ohare_init(void)
 	}
 }
 
-extern char *bootpath;
-extern char *bootdevice;
+char *bootpath;
+char *bootdevice;
 void *boot_host;
 int boot_target;
 int boot_part;
@@ -391,6 +393,7 @@ note_scsi_host(struct device_node *node, void *host)
 		}
 	}
 }
+EXPORT_SYMBOL(note_scsi_host);
 #endif
 
 #if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
@@ -565,9 +568,7 @@ pmac_halt(void)
 	pmac_power_off();
 }
 
-void __init
-pmac_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	  unsigned long r6, unsigned long r7)
+void __init pmac_init(void)
 {
 	/* isa_io_base gets set in pmac_find_bridges */
 	isa_mem_base = PMAC_ISA_MEM_BASE;

include/asm-powerpc/cputable.h

@@ -57,6 +57,9 @@ struct cpu_spec {
 
 extern struct cpu_spec		*cur_cpu_spec;
 
+extern void identify_cpu(unsigned long offset, unsigned long cpu);
+extern void do_cpu_ftr_fixups(unsigned long offset);
+
 #endif /* __ASSEMBLY__ */
 
 /* CPU kernel features */

include/asm-powerpc/iommu.h

+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Rewrite, cleanup:
+ * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_IOMMU_H
+#define _ASM_IOMMU_H
+
+#include <asm/types.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+/*
+ * IOMAP_MAX_ORDER defines the largest contiguous block
+ * of dma space we can get.  IOMAP_MAX_ORDER = 13
+ * allows up to 2**12 pages (4096 * 4096) = 16 MB
+ */
+#define IOMAP_MAX_ORDER 13
+
+struct iommu_table {
+	unsigned long  it_busno;     /* Bus number this table belongs to */
+	unsigned long  it_size;      /* Size of iommu table in entries */
+	unsigned long  it_offset;    /* Offset into global table */
+	unsigned long  it_base;      /* mapped address of tce table */
+	unsigned long  it_index;     /* which iommu table this is */
+	unsigned long  it_type;      /* type: PCI or Virtual Bus */
+	unsigned long  it_blocksize; /* Entries in each block (cacheline) */
+	unsigned long  it_hint;      /* Hint for next alloc */
+	unsigned long  it_largehint; /* Hint for large allocs */
+	unsigned long  it_halfpoint; /* Breaking point for small/large allocs */
+	spinlock_t     it_lock;      /* Protects it_map */
+	unsigned long *it_map;       /* A simple allocation bitmap for now */
+};
+
+struct scatterlist;
+struct device_node;
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+
+/* Walks all buses and creates iommu tables */
+extern void iommu_setup_pSeries(void);
+extern void iommu_setup_u3(void);
+
+/* Frees table for an individual device node */
+extern void iommu_free_table(struct device_node *dn);
+
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+#ifdef CONFIG_PPC_PSERIES
+
+/* Creates table for an individual device node */
+extern void iommu_devnode_init_pSeries(struct device_node *dn);
+
+#endif /* CONFIG_PPC_PSERIES */
+
+#ifdef CONFIG_PPC_ISERIES
+
+/* Creates table for an individual device node */
+extern void iommu_devnode_init_iSeries(struct device_node *dn);
+
+#endif /* CONFIG_PPC_ISERIES */
+
+/* Initializes an iommu_table based in values set in the passed-in
+ * structure
+ */
+extern struct iommu_table *iommu_init_table(struct iommu_table * tbl);
+
+extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction direction);
+extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
+		int nelems, enum dma_data_direction direction);
+
+extern void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
+		dma_addr_t *dma_handle, unsigned int __nocast flag);
+extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
+		void *vaddr, dma_addr_t dma_handle);
+extern dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
+		size_t size, enum dma_data_direction direction);
+extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
+		size_t size, enum dma_data_direction direction);
+
+extern void iommu_init_early_pSeries(void);
+extern void iommu_init_early_iSeries(void);
+extern void iommu_init_early_u3(void);
+
+#ifdef CONFIG_PCI
+extern void pci_iommu_init(void);
+extern void pci_direct_iommu_init(void);
+#else
+static inline void pci_iommu_init(void) { }
+#endif
+
+extern void alloc_u3_dart_table(void);
+
+#endif /* _ASM_IOMMU_H */

include/asm-powerpc/lmb.h

+#ifndef _PPC64_LMB_H
+#define _PPC64_LMB_H
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <asm/prom.h>
+
+#define MAX_LMB_REGIONS 128
+
+#define LMB_ALLOC_ANYWHERE	0
+
+struct lmb_property {
+	unsigned long base;
+	unsigned long size;
+};
+
+struct lmb_region {
+	unsigned long cnt;
+	unsigned long size;
+	struct lmb_property region[MAX_LMB_REGIONS+1];
+};
+
+struct lmb {
+	unsigned long debug;
+	unsigned long rmo_size;
+	struct lmb_region memory;
+	struct lmb_region reserved;
+};
+
+extern struct lmb lmb;
+
+extern void __init lmb_init(void);
+extern void __init lmb_analyze(void);
+extern long __init lmb_add(unsigned long, unsigned long);
+extern long __init lmb_reserve(unsigned long, unsigned long);
+extern unsigned long __init lmb_alloc(unsigned long, unsigned long);
+extern unsigned long __init lmb_alloc_base(unsigned long, unsigned long,
+					   unsigned long);
+extern unsigned long __init lmb_phys_mem_size(void);
+extern unsigned long __init lmb_end_of_DRAM(void);
+extern unsigned long __init lmb_abs_to_phys(unsigned long);
+extern void __init lmb_enforce_memory_limit(unsigned long);
+
+extern void lmb_dump_all(void);
+
+extern unsigned long io_hole_start;
+
+static inline unsigned long
+lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
+{
+	return type->region[region_nr].size;
+}
+static inline unsigned long
+lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
+{
+	return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
+}
+static inline unsigned long
+lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+	return type->region[region_nr].base >> PAGE_SHIFT;
+}
+static inline unsigned long
+lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+	return lmb_start_pfn(type, region_nr) +
+	       lmb_size_pages(type, region_nr);
+}
+
+#endif /* _PPC64_LMB_H */

include/asm-powerpc/pSeries_reconfig.h

+#ifndef _PPC64_PSERIES_RECONFIG_H
+#define _PPC64_PSERIES_RECONFIG_H
+
+#include <linux/notifier.h>
+
+/*
+ * Use this API if your code needs to know about OF device nodes being
+ * added or removed on pSeries systems.
+ */
+
+#define PSERIES_RECONFIG_ADD    0x0001
+#define PSERIES_RECONFIG_REMOVE 0x0002
+
+#ifdef CONFIG_PPC_PSERIES
+extern int pSeries_reconfig_notifier_register(struct notifier_block *);
+extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
+#else /* !CONFIG_PPC_PSERIES */
+static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
+#endif /* CONFIG_PPC_PSERIES */
+
+#endif /* _PPC64_PSERIES_RECONFIG_H */

include/asm-powerpc/prom.h

+#ifndef _POWERPC_PROM_H
+#define _POWERPC_PROM_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <asm/atomic.h>
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed	/* marker */
+#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
+#define OF_DT_END_NODE		0x2		/* End node */
+#define OF_DT_PROP		0x3		/* Property: name off, size,
+						 * content */
+#define OF_DT_NOP		0x4		/* nop */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		0x10
+
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header
+{
+	u32	magic;			/* magic word OF_DT_HEADER */
+	u32	totalsize;		/* total size of DT block */
+	u32	off_dt_struct;		/* offset to structure */
+	u32	off_dt_strings;		/* offset to strings */
+	u32	off_mem_rsvmap;		/* offset to memory reserve map */
+	u32	version;		/* format version */
+	u32	last_comp_version;	/* last compatible version */
+	/* version 2 fields below */
+	u32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
+	/* version 3 fields below */
+	u32	dt_strings_size;	/* size of the DT strings block */
+};
+
+
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct address_range {
+	unsigned long space;
+	unsigned long address;
+	unsigned long size;
+};
+
+struct interrupt_info {
+	int	line;
+	int	sense;		/* +ve/-ve logic, edge or level, etc. */
+};
+
+struct pci_address {
+	u32 a_hi;
+	u32 a_mid;
+	u32 a_lo;
+};
+
+struct isa_address {
+	u32 a_hi;
+	u32 a_lo;
+};
+
+struct isa_range {
+	struct isa_address isa_addr;
+	struct pci_address pci_addr;
+	unsigned int size;
+};
+
+struct reg_property {
+	unsigned long address;
+	unsigned long size;
+};
+
+struct reg_property32 {
+	unsigned int address;
+	unsigned int size;
+};
+
+struct reg_property64 {
+	unsigned long address;
+	unsigned long size;
+};
+
+struct property {
+	char	*name;
+	int	length;
+	unsigned char *value;
+	struct property *next;
+};
+
+struct device_node {
+	char	*name;
+	char	*type;
+	phandle	node;
+	phandle linux_phandle;
+	int	n_addrs;
+	struct	address_range *addrs;
+	int	n_intrs;
+	struct	interrupt_info *intrs;
+	char	*full_name;
+
+	struct	property *properties;
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct  proc_dir_entry *pde;	/* this node's proc directory */
+	struct  kref kref;
+	unsigned long _flags;
+	void	*data;
+};
+
+extern struct device_node *of_chosen;
+
+/* flag descriptions */
+#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
+
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
+{
+	dn->pde = de;
+}
+
+
+/* OBSOLETE: Old style node lookup */
+extern struct device_node *find_devices(const char *name);
+extern struct device_node *find_type_devices(const char *type);
+extern struct device_node *find_path_device(const char *path);
+extern struct device_node *find_compatible_devices(const char *type,
+						   const char *compat);
+extern struct device_node *find_all_nodes(void);
+
+/* New style node lookup */
+extern struct device_node *of_find_node_by_name(struct device_node *from,
+	const char *name);
+extern struct device_node *of_find_node_by_type(struct device_node *from,
+	const char *type);
+extern struct device_node *of_find_compatible_node(struct device_node *from,
+	const char *type, const char *compat);
+extern struct device_node *of_find_node_by_path(const char *path);
+extern struct device_node *of_find_node_by_phandle(phandle handle);
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_get_parent(const struct device_node *node);
+extern struct device_node *of_get_next_child(const struct device_node *node,
+					     struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(const struct device_node *);
+
+/* Other Prototypes */
+extern void finish_device_tree(void);
+extern void unflatten_device_tree(void);
+extern void early_init_devtree(void *);
+extern int device_is_compatible(struct device_node *device, const char *);
+extern int machine_is_compatible(const char *compat);
+extern unsigned char *get_property(struct device_node *node, const char *name,
+				   int *lenp);
+extern void print_properties(struct device_node *node);
+extern int prom_n_addr_cells(struct device_node* np);
+extern int prom_n_size_cells(struct device_node* np);
+extern int prom_n_intr_cells(struct device_node* np);
+extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
+extern void prom_add_property(struct device_node* np, struct property* prop);
+
+/*
+ * PCI <-> OF matching functions
+ * (XXX should these be here?)
+ */
+struct pci_bus;
+struct pci_dev;
+extern int pci_device_from_OF_node(struct device_node *node,
+				   u8* bus, u8* devfn);
+extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
+extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
+extern void pci_create_OF_bus_map(void);
+extern struct resource *request_OF_resource(struct device_node* node,
+				int index, const char* name_postfix);
+extern int release_OF_resource(struct device_node* node, int index);
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PROM_H */

include/asm-powerpc/rtas.h

+#ifndef _POWERPC_RTAS_H
+#define _POWERPC_RTAS_H
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+
+/*
+ * Definitions for talking to the RTAS on CHRP machines.
+ *
+ * Copyright (C) 2001 Peter Bergner
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define RTAS_UNKNOWN_SERVICE (-1)
+#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
+
+/* Buffer size for ppc_rtas system call. */
+#define RTAS_RMOBUF_MAX (64 * 1024)
+
+/* RTAS return status codes */
+#define RTAS_BUSY		-2    /* RTAS Busy */
+#define RTAS_EXTENDED_DELAY_MIN	9900
+#define RTAS_EXTENDED_DELAY_MAX	9905
+
+/*
+ * In general to call RTAS use rtas_token("string") to lookup
+ * an RTAS token for the given string (e.g. "event-scan").
+ * To actually perform the call use
+ *    ret = rtas_call(token, n_in, n_out, ...)
+ * Where n_in is the number of input parameters and
+ *       n_out is the number of output parameters
+ *
+ * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE
+ * will be returned as a token.  rtas_call() does look for this
+ * token and error out gracefully so rtas_call(rtas_token("str"), ...)
+ * may be safely used for one-shot calls to RTAS.
+ *
+ */
+
+typedef u32 rtas_arg_t;
+
+struct rtas_args {
+	u32 token;
+	u32 nargs;
+	u32 nret; 
+	rtas_arg_t args[16];
+	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
+};  
+
+extern struct rtas_args rtas_stop_self_args;
+
+struct rtas_t {
+	unsigned long entry;		/* physical address pointer */
+	unsigned long base;		/* physical address pointer */
+	unsigned long size;
+	spinlock_t lock;
+	struct rtas_args args;
+	struct device_node *dev;	/* virtual address pointer */
+};
+
+/* RTAS event classes */
+#define RTAS_INTERNAL_ERROR		0x80000000 /* set bit 0 */
+#define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
+#define RTAS_POWERMGM_EVENTS		0x20000000 /* set bit 2 */
+#define RTAS_HOTPLUG_EVENTS		0x10000000 /* set bit 3 */
+#define RTAS_EVENT_SCAN_ALL_EVENTS	0xf0000000
+
+/* RTAS event severity */
+#define RTAS_SEVERITY_FATAL		0x5
+#define RTAS_SEVERITY_ERROR		0x4
+#define RTAS_SEVERITY_ERROR_SYNC	0x3
+#define RTAS_SEVERITY_WARNING		0x2
+#define RTAS_SEVERITY_EVENT		0x1
+#define RTAS_SEVERITY_NO_ERROR		0x0
+
+/* RTAS event disposition */
+#define RTAS_DISP_FULLY_RECOVERED	0x0
+#define RTAS_DISP_LIMITED_RECOVERY	0x1
+#define RTAS_DISP_NOT_RECOVERED		0x2
+
+/* RTAS event initiator */
+#define RTAS_INITIATOR_UNKNOWN		0x0
+#define RTAS_INITIATOR_CPU		0x1
+#define RTAS_INITIATOR_PCI		0x2
+#define RTAS_INITIATOR_ISA		0x3
+#define RTAS_INITIATOR_MEMORY		0x4
+#define RTAS_INITIATOR_POWERMGM		0x5
+
+/* RTAS event target */
+#define RTAS_TARGET_UNKNOWN		0x0
+#define RTAS_TARGET_CPU			0x1
+#define RTAS_TARGET_PCI			0x2
+#define RTAS_TARGET_ISA			0x3
+#define RTAS_TARGET_MEMORY		0x4
+#define RTAS_TARGET_POWERMGM		0x5
+
+/* RTAS event type */
+#define RTAS_TYPE_RETRY			0x01
+#define RTAS_TYPE_TCE_ERR		0x02
+#define RTAS_TYPE_INTERN_DEV_FAIL	0x03
+#define RTAS_TYPE_TIMEOUT		0x04
+#define RTAS_TYPE_DATA_PARITY		0x05
+#define RTAS_TYPE_ADDR_PARITY		0x06
+#define RTAS_TYPE_CACHE_PARITY		0x07
+#define RTAS_TYPE_ADDR_INVALID		0x08
+#define RTAS_TYPE_ECC_UNCORR		0x09
+#define RTAS_TYPE_ECC_CORR		0x0a
+#define RTAS_TYPE_EPOW			0x40
+#define RTAS_TYPE_PLATFORM		0xE0
+#define RTAS_TYPE_IO			0xE1
+#define RTAS_TYPE_INFO			0xE2
+#define RTAS_TYPE_DEALLOC		0xE3
+#define RTAS_TYPE_DUMP			0xE4
+/* I don't add PowerMGM events right now, this is a different topic */ 
+#define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
+#define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
+#define RTAS_TYPE_PMGM_LID_OPEN		0x62
+#define RTAS_TYPE_PMGM_LID_CLOSE	0x63
+#define RTAS_TYPE_PMGM_SLEEP_BTN	0x64
+#define RTAS_TYPE_PMGM_WAKE_BTN		0x65
+#define RTAS_TYPE_PMGM_BATTERY_WARN	0x66
+#define RTAS_TYPE_PMGM_BATTERY_CRIT	0x67
+#define RTAS_TYPE_PMGM_SWITCH_TO_BAT	0x68
+#define RTAS_TYPE_PMGM_SWITCH_TO_AC	0x69
+#define RTAS_TYPE_PMGM_KBD_OR_MOUSE	0x6a
+#define RTAS_TYPE_PMGM_ENCLOS_OPEN	0x6b
+#define RTAS_TYPE_PMGM_ENCLOS_CLOSED	0x6c
+#define RTAS_TYPE_PMGM_RING_INDICATE	0x6d
+#define RTAS_TYPE_PMGM_LAN_ATTENTION	0x6e
+#define RTAS_TYPE_PMGM_TIME_ALARM	0x6f
+#define RTAS_TYPE_PMGM_CONFIG_CHANGE	0x70
+#define RTAS_TYPE_PMGM_SERVICE_PROC	0x71
+
+struct rtas_error_log {
+	unsigned long version:8;		/* Architectural version */
+	unsigned long severity:3;		/* Severity level of error */
+	unsigned long disposition:2;		/* Degree of recovery */
+	unsigned long extended:1;		/* extended log present? */
+	unsigned long /* reserved */ :2;	/* Reserved for future use */
+	unsigned long initiator:4;		/* Initiator of event */
+	unsigned long target:4;			/* Target of failed operation */
+	unsigned long type:8;			/* General event or error*/
+	unsigned long extended_log_length:32;	/* length in bytes */
+	unsigned char buffer[1];
+};
+
+struct flash_block {
+	char *data;
+	unsigned long length;
+};
+
+/* This struct is very similar but not identical to
+ * that needed by the rtas flash update.
+ * All we need to do for rtas is rewrite num_blocks
+ * into a version/length and translate the pointers
+ * to absolute.
+ */
+#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block))
+struct flash_block_list {
+	unsigned long num_blocks;
+	struct flash_block_list *next;
+	struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
+};
+struct flash_block_list_header { /* just the header of flash_block_list */
+	unsigned long num_blocks;
+	struct flash_block_list *next;
+};
+extern struct flash_block_list_header rtas_firmware_flash_list;
+
+extern struct rtas_t rtas;
+
+extern void enter_rtas(unsigned long);
+extern int rtas_token(const char *service);
+extern int rtas_call(int token, int, int, int *, ...);
+extern void call_rtas_display_status(unsigned char);
+extern void rtas_restart(char *cmd);
+extern void rtas_power_off(void);
+extern void rtas_halt(void);
+extern void rtas_os_term(char *str);
+extern int rtas_get_sensor(int sensor, int index, int *state);
+extern int rtas_get_power_level(int powerdomain, int *level);
+extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
+extern int rtas_set_indicator(int indicator, int index, int new_value);
+extern void rtas_progress(char *s, unsigned short hex);
+extern void rtas_initialize(void);
+
+struct rtc_time;
+extern void rtas_get_boot_time(struct rtc_time *rtc_time);
+extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
+extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
+
+/* Given an RTAS status code of 9900..9905 compute the hinted delay */
+unsigned int rtas_extended_busy_delay_time(int status);
+static inline int rtas_is_extended_busy(int status)
+{
+	return status >= 9900 && status <= 9909;
+}
+
+extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
+
+/* Error types logged.  */
+#define ERR_FLAG_ALREADY_LOGGED	0x0
+#define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
+#define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
+#define ERR_TYPE_KERNEL_PANIC	0x4	/* from panic() */
+
+/* All the types and not flags */
+#define ERR_TYPE_MASK	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
+
+#define RTAS_DEBUG KERN_DEBUG "RTAS: "
+ 
+#define RTAS_ERROR_LOG_MAX 2048
+
+/*
+ * Return the firmware-specified size of the error log buffer
+ *  for all rtas calls that require an error buffer argument.
+ *  This includes 'check-exception' and 'rtas-last-error'.
+ */
+extern int rtas_get_error_log_max(void);
+
+/* Event Scan Parameters */
+#define EVENT_SCAN_ALL_EVENTS	0xf0000000
+#define SURVEILLANCE_TOKEN	9000
+#define LOG_NUMBER		64		/* must be a power of two */
+#define LOG_NUMBER_MASK		(LOG_NUMBER-1)
+
+/* Some RTAS ops require a data buffer and that buffer must be < 4G.
+ * Rather than having a memory allocator, just use this buffer
+ * (get the lock first), make the RTAS call.  Copy the data instead
+ * of holding the buffer for long.
+ */
+
+#define RTAS_DATA_BUF_SIZE 4096
+extern spinlock_t rtas_data_buf_lock;
+extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
+
+extern void rtas_stop_self(void);
+
+/* RMO buffer reserved for user-space RTAS use */
+extern unsigned long rtas_rmo_buf;
+
+#define GLOBAL_INTERRUPT_QUEUE 9005
+
+#endif /* _POWERPC_RTAS_H */

include/asm-powerpc/system.h

@@ -346,7 +346,12 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
 
 #define arch_align_stack(x) (x)
 
+/* Used in very early kernel initialization. */
 extern unsigned long reloc_offset(void);
+extern unsigned long add_reloc_offset(unsigned long);
+extern void reloc_got2(unsigned long);
+
+#define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_SYSTEM_H */