提交 9431996f 编写于 作者: J Juerg Haefliger 提交者: Mark M. Hoffman

hwmon: New SMSC DME1737 driver

Add support for the hardware monitoring and fan control
capabilities of the SMSC DME1737 and Asus A8000 Super-I/O chips.

The hardware monitoring logic of this chip is similar to the LM85 but
has some additional features that this driver supports. Even though
it's a Super-I/O chip, the hardware monitoring logic can only be
accessed via SMBus.

Signed-off-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
上级 87f0f31b
...@@ -442,6 +442,18 @@ config SENSORS_SIS5595 ...@@ -442,6 +442,18 @@ config SENSORS_SIS5595
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called sis5595. will be called sis5595.
config SENSORS_DME1737
tristate "SMSC DME1737 and compatibles"
depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the hardware monitoring
and fan control features of the SMSC DME1737 (and compatibles
like the Asus A8000) Super-I/O chip.
This driver can also be built as a module. If so, the module
will be called dme1737.
config SENSORS_SMSC47M1 config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles" tristate "SMSC LPC47M10x and compatibles"
help help
......
...@@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o ...@@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
obj-$(CONFIG_SENSORS_AMS) += ams/ obj-$(CONFIG_SENSORS_AMS) += ams/
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_FSCHER) += fscher.o obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
......
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册