提交 80780a54 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: bcmgenet: remove PHY_BRCM_100MBPS_WAR

Now that we have removed the need for the PHY_BRCM_100MBPS_WAR flag, we
can remove it from the GENET driver and the broadcom shared header file.
The PHY driver checks the PHY supported bitmask instead.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e18556ee
......@@ -296,7 +296,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
struct bcmgenet_priv *priv = netdev_priv(dev);
struct device_node *dn = priv->pdev->dev.of_node;
struct phy_device *phydev;
unsigned int phy_flags;
int ret;
if (priv->phydev) {
......@@ -338,15 +337,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
return ret;
}
phy_flags = PHY_BRCM_100MBPS_WAR;
/* workarounds are only needed for 100Mpbs PHYs, and
* never on GENET V1 hardware
*/
if ((phydev->supported & PHY_GBIT_FEATURES) || GENET_IS_V1(priv))
phy_flags = 0;
phydev->dev_flags |= phy_flags;
phydev->advertising = phydev->supported;
/* The internal PHY has its link interrupts routed to the
......
......@@ -40,7 +40,6 @@
#define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000
#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000
/* Broadcom BCM7xxx specific workarounds */
#define PHY_BRCM_100MBPS_WAR 0x00010000
#define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff)
#define PHY_BRCM_7XXX_PATCH(x) ((x) & 0xff)
#define PHY_BCM_FLAGS_VALID 0x80000000
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册