提交 7a06a122 编写于 作者: D Dmitry Kravkov 提交者: David S. Miller

bnx2x: don't reset device while reading its configuration.

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 3395a033
......@@ -5822,7 +5822,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
* take the UNDI lock to protect undi_unload flow from accessing
* registers while we're resetting the chip
*/
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
bnx2x_reset_common(bp);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
......@@ -5834,7 +5834,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
}
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
......@@ -8570,10 +8570,12 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
/* Check if there is any driver already loaded */
val = REG_RD(bp, MISC_REG_UNPREPARED);
if (val == 0x1) {
/* Check if it is the UNDI driver
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
/*
* Check if it is the UNDI driver
* UNDI driver initializes CID offset for normal bell to 0x7
*/
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
if (val == 0x7) {
u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
......@@ -8611,9 +8613,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
bnx2x_fw_command(bp, reset_code, 0);
}
/* now it's safe to release the lock */
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
bnx2x_undi_int_disable(bp);
port = BP_PORT(bp);
......@@ -8663,8 +8662,10 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
bp->fw_seq =
(SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
} else
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
}
/* now it's safe to release the lock */
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
}
}
......@@ -9440,6 +9441,10 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
bp->igu_base_sb = 0;
} else {
bp->common.int_block = INT_BLOCK_IGU;
/* do not allow device reset during IGU info preocessing */
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
......@@ -9471,6 +9476,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
bnx2x_get_igu_cam_info(bp);
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
}
/*
......
......@@ -5766,7 +5766,7 @@
#define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8
#define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9
#define HW_LOCK_RESOURCE_SPIO 2
#define HW_LOCK_RESOURCE_UNDI 5
#define HW_LOCK_RESOURCE_RESET 5
#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4)
#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5)
#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册