提交 73bc7d31 编写于 作者: M Melchior FRANZ 提交者: Greg Kroah-Hartman

USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)

So far the USBLED driver only supports Delcom's "USB Visual Signal
Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The
driver generates virtual files "red", "green", and "blue" under the
device's /sys/ directory, where color values can be read from and
written to.

This patch adds support for Dream Cheeky's "DL100B Webmail Notifier"
(http://www.dreamcheeky.com/webmail-notifier -- available from several
shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL).
This device isn't as pretty as Delcom's, but it's *far* cheaper, and
its 3 LEDs can be set in 32 brightness steps each. The grey envelope
contour can easily be removed, leaving a rather neutral white box (with
a few small holes), which is useful for generic signalling purposes.
Of course, the small circuit board can easily be put into a prettier
case.

The DL100B device pretends to be a HID, but the HID descriptor shows
that it's not overly useful as such (see below). The patch therefore
removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary
commands to usbled.c. The protocol info comes from the developer's
manual that Dream Cheeky kindly provided (815DeveloperManual.pdf).

HID descriptor:

  0: 05 01   Usage Page 'Generic Desktop Controls'
  2: 09 10   Usage 'Reserved'
  4: a1 01   Collection 'Application (mouse, keyboard)'
  6: 05 00           Usage Page 'Undefined'
  8: 19 10           Usage Minimum = 16
 10: 29 11           Usage Maximum = 17
 12: 15 00           Logical Minimum = 0
 14: 25 0f           Logical Maximum = 15
 16: 75 08           Report Size = 8
 18: 95 08           Report Count = 8
 20: 91 02           Output data *var abs lin pref-state null-pos non-vol bit-field
 22: 19 10           Usage Minimum = 16
 24: 29 11           Usage Maximum = 17
 26: 15 00           Logical Minimum = 0
 28: 25 0f           Logical Maximum = 15
 30: 75 08           Report Size = 8
 32: 95 08           Report Count = 8
 34: 81 00           Input data array abs lin pref-state null-pos non-vol bit-field
 36: c0      End Collection
Signed-off-by: NMelchior FRANZ <mfranz@aon.at>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 c466cd2b
......@@ -1604,6 +1604,7 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DEALEXTREAME, USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x0004) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
......
......@@ -200,6 +200,8 @@
#define USB_VENDOR_ID_ELECOM 0x056e
#define USB_DEVICE_ID_ELECOM_BM084 0x0061
#define USB_VENDOR_ID_DREAM_CHEEKY 0x1d34
#define USB_VENDOR_ID_ELO 0x04E7
#define USB_DEVICE_ID_ELO_TS2700 0x0020
......
/*
* USB LED driver - 1.1
* USB LED driver
*
* Copyright (C) 2004 Greg Kroah-Hartman (greg@kroah.com)
*
......@@ -20,12 +20,17 @@
#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com"
#define DRIVER_DESC "USB LED Driver"
#define VENDOR_ID 0x0fc5
#define PRODUCT_ID 0x1223
enum led_type {
DELCOM_VISUAL_SIGNAL_INDICATOR,
DREAM_CHEEKY_WEBMAIL_NOTIFIER,
};
/* table of devices that work with this driver */
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(VENDOR_ID, PRODUCT_ID) },
{ USB_DEVICE(0x0fc5, 0x1223),
.driver_info = DELCOM_VISUAL_SIGNAL_INDICATOR },
{ USB_DEVICE(0x1d34, 0x0004),
.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
{ },
};
MODULE_DEVICE_TABLE (usb, id_table);
......@@ -35,15 +40,12 @@ struct usb_led {
unsigned char blue;
unsigned char red;
unsigned char green;
enum led_type type;
};
#define BLUE 0x04
#define RED 0x02
#define GREEN 0x01
static void change_color(struct usb_led *led)
{
int retval;
unsigned char color = 0x07;
unsigned char *buffer;
buffer = kmalloc(8, GFP_KERNEL);
......@@ -52,25 +54,59 @@ static void change_color(struct usb_led *led)
return;
}
if (led->blue)
color &= ~(BLUE);
if (led->red)
color &= ~(RED);
if (led->green)
color &= ~(GREEN);
dev_dbg(&led->udev->dev,
"blue = %d, red = %d, green = %d, color = %.2x\n",
led->blue, led->red, led->green, color);
retval = usb_control_msg(led->udev,
usb_sndctrlpipe(led->udev, 0),
0x12,
0xc8,
(0x02 * 0x100) + 0x0a,
(0x00 * 0x100) + color,
buffer,
8,
2000);
switch (led->type) {
case DELCOM_VISUAL_SIGNAL_INDICATOR: {
unsigned char color = 0x07;
if (led->blue)
color &= ~0x04;
if (led->red)
color &= ~0x02;
if (led->green)
color &= ~0x01;
dev_dbg(&led->udev->dev,
"blue = %d, red = %d, green = %d, color = %.2x\n",
led->blue, led->red, led->green, color);
retval = usb_control_msg(led->udev,
usb_sndctrlpipe(led->udev, 0),
0x12,
0xc8,
(0x02 * 0x100) + 0x0a,
(0x00 * 0x100) + color,
buffer,
8,
2000);
break;
}
case DREAM_CHEEKY_WEBMAIL_NOTIFIER:
dev_dbg(&led->udev->dev,
"red = %d, green = %d, blue = %d\n",
led->red, led->green, led->blue);
buffer[0] = led->red;
buffer[1] = led->green;
buffer[2] = led->blue;
buffer[3] = buffer[4] = buffer[5] = 0;
buffer[6] = 0x1a;
buffer[7] = 0x05;
retval = usb_control_msg(led->udev,
usb_sndctrlpipe(led->udev, 0),
0x09,
0x21,
0x200,
0,
buffer,
8,
2000);
break;
default:
dev_err(&led->udev->dev, "unknown device type %d\n", led->type);
}
if (retval)
dev_dbg(&led->udev->dev, "retval = %d\n", retval);
kfree(buffer);
......@@ -107,11 +143,12 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id
dev = kzalloc(sizeof(struct usb_led), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory\n");
dev_err(&interface->dev, "out of memory\n");
goto error_mem;
}
dev->udev = usb_get_dev(udev);
dev->type = id->driver_info;
usb_set_intfdata (interface, dev);
......@@ -125,6 +162,31 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id
if (retval)
goto error;
if (dev->type == DREAM_CHEEKY_WEBMAIL_NOTIFIER) {
unsigned char *enable;
enable = kmemdup("\x1f\x02\0\x5f\0\0\x1a\x03", 8, GFP_KERNEL);
if (!enable) {
dev_err(&interface->dev, "out of memory\n");
retval = -ENOMEM;
goto error;
}
retval = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
0x09,
0x21,
0x200,
0,
enable,
8,
2000);
kfree(enable);
if (retval != 8)
goto error;
}
dev_info(&interface->dev, "USB LED device now attached\n");
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册