ARM: imx: fix build failure concerning otg/ulpi

The build failure was introduced by

	13dd0c97 (USB: otg/ulpi: extend the generic ulpi driver.)
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

arch/arm/mach-imx/mach-cpuimx27.c

@@ -279,13 +279,13 @@ static void __init eukrea_cpuimx27_init(void)
 #if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 		mxc_register_device(&mxc_otg_host, &otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 #endif

arch/arm/mach-imx/mach-pca100.c

@@ -419,13 +419,13 @@ static void __init pca100_init(void)
 #if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 		mxc_register_device(&mxc_otg_host, &otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 #endif

arch/arm/mach-mx25/mach-cpuimx25.c

@@ -138,7 +138,7 @@ static void __init eukrea_cpuimx25_init(void)
 #if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 		mxc_register_device(&mxc_otg, &otg_pdata);
 	}

arch/arm/mach-mx3/mach-cpuimx35.c

@@ -192,7 +192,7 @@ static void __init mxc_board_init(void)
 #if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 		mxc_register_device(&mxc_otg_host, &otg_pdata);
 	}