提交 5e696617 编写于 作者: B Benjamin Herrenschmidt 提交者: Paul Mackerras

powerpc/mm: Split mmu_context handling

This splits the mmu_context handling between 32-bit hash based
processors, 64-bit hash based processors and everybody else.  This is
preliminary work for adding SMP support for BookE processors.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 6d2170be
......@@ -2,240 +2,26 @@
#define __ASM_POWERPC_MMU_CONTEXT_H
#ifdef __KERNEL__
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <asm/mmu.h>
#include <asm/cputable.h>
#include <asm-generic/mm_hooks.h>
#ifndef CONFIG_PPC64
#include <asm/atomic.h>
#include <linux/bitops.h>
/*
* On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
* (virtual segment identifiers) for each context. Although the
* hardware supports 24-bit VSIDs, and thus >1 million contexts,
* we only use 32,768 of them. That is ample, since there can be
* at most around 30,000 tasks in the system anyway, and it means
* that we can use a bitmap to indicate which contexts are in use.
* Using a bitmap means that we entirely avoid all of the problems
* that we used to have when the context number overflowed,
* particularly on SMP systems.
* -- paulus.
*/
/*
* This function defines the mapping from contexts to VSIDs (virtual
* segment IDs). We use a skew on both the context and the high 4 bits
* of the 32-bit virtual address (the "effective segment ID") in order
* to spread out the entries in the MMU hash table. Note, if this
* function is changed then arch/ppc/mm/hashtable.S will have to be
* changed to correspond.
*/
#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
& 0xffffff)
/*
The MPC8xx has only 16 contexts. We rotate through them on each
task switch. A better way would be to keep track of tasks that
own contexts, and implement an LRU usage. That way very active
tasks don't always have to pay the TLB reload overhead. The
kernel pages are mapped shared, so the kernel can run on behalf
of any task that makes a kernel entry. Shared does not mean they
are not protected, just that the ASID comparison is not performed.
-- Dan
The IBM4xx has 256 contexts, so we can just rotate through these
as a way of "switching" contexts. If the TID of the TLB is zero,
the PID/TID comparison is disabled, so we can use a TID of zero
to represent all kernel pages as shared among all contexts.
-- Dan
*/
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
}
#ifdef CONFIG_8xx
#define NO_CONTEXT 16
#define LAST_CONTEXT 15
#define FIRST_CONTEXT 0
#elif defined(CONFIG_4xx)
#define NO_CONTEXT 256
#define LAST_CONTEXT 255
#define FIRST_CONTEXT 1
#elif defined(CONFIG_E200) || defined(CONFIG_E500)
#define NO_CONTEXT 256
#define LAST_CONTEXT 255
#define FIRST_CONTEXT 1
#else
/* PPC 6xx, 7xx CPUs */
#define NO_CONTEXT ((unsigned long) -1)
#define LAST_CONTEXT 32767
#define FIRST_CONTEXT 1
#endif
/*
* Set the current MMU context.
* On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
* loading up the segment registers for the user part of the address space.
*
* Since the PGD is immediately available, it is much faster to simply
* pass this along as a second parameter, which is required for 8xx and
* can be used for debugging on all processors (if you happen to have
* an Abatron).
*/
extern void set_context(unsigned long contextid, pgd_t *pgd);
/*
* Bitmap of contexts in use.
* The size of this bitmap is LAST_CONTEXT + 1 bits.
*/
extern unsigned long context_map[];
/*
* This caches the next context number that we expect to be free.
* Its use is an optimization only, we can't rely on this context
* number to be free, but it usually will be.
*/
extern unsigned long next_mmu_context;
/*
* If we don't have sufficient contexts to give one to every task
* that could be in the system, we need to be able to steal contexts.
* These variables support that.
*/
#if LAST_CONTEXT < 30000
#define FEW_CONTEXTS 1
extern atomic_t nr_free_contexts;
extern struct mm_struct *context_mm[LAST_CONTEXT+1];
extern void steal_context(void);
#endif
/*
* Get a new mmu context for the address space described by `mm'.
*/
static inline void get_mmu_context(struct mm_struct *mm)
{
unsigned long ctx;
if (mm->context.id != NO_CONTEXT)
return;
#ifdef FEW_CONTEXTS
while (atomic_dec_if_positive(&nr_free_contexts) < 0)
steal_context();
#endif
ctx = next_mmu_context;
while (test_and_set_bit(ctx, context_map)) {
ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
if (ctx > LAST_CONTEXT)
ctx = 0;
}
next_mmu_context = (ctx + 1) & LAST_CONTEXT;
mm->context.id = ctx;
#ifdef FEW_CONTEXTS
context_mm[ctx] = mm;
#endif
}
#include <asm/cputhreads.h>
/*
* Set up the context for a new address space.
* Most if the context management is out of line
*/
static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
{
mm->context.id = NO_CONTEXT;
return 0;
}
/*
* We're finished using the context for an address space.
*/
static inline void destroy_context(struct mm_struct *mm)
{
preempt_disable();
if (mm->context.id != NO_CONTEXT) {
clear_bit(mm->context.id, context_map);
mm->context.id = NO_CONTEXT;
#ifdef FEW_CONTEXTS
atomic_inc(&nr_free_contexts);
#endif
}
preempt_enable();
}
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
#ifdef CONFIG_ALTIVEC
if (cpu_has_feature(CPU_FTR_ALTIVEC))
asm volatile ("dssall;\n"
#ifndef CONFIG_POWER4
"sync;\n" /* G4 needs a sync here, G5 apparently not */
#endif
: : );
#endif /* CONFIG_ALTIVEC */
tsk->thread.pgdir = next->pgd;
if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
cpu_set(smp_processor_id(), next->cpu_vm_mask);
/* No need to flush userspace segments if the mm doesnt change */
if (prev == next)
return;
/* Setup new userspace context */
get_mmu_context(next);
set_context(next->context.id, next->pgd);
}
#define deactivate_mm(tsk,mm) do { } while (0)
/*
* After we have set current->mm to a new value, this activates
* the context for the new mm so we see the new mappings.
*/
#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current)
extern void mmu_context_init(void);
#else
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/sched.h>
/*
* Copyright (C) 2001 PPC 64 Team, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
static inline void enter_lazy_tlb(struct mm_struct *mm,
struct task_struct *tsk)
{
}
/*
* The proto-VSID space has 2^35 - 1 segments available for user mappings.
* Each segment contains 2^28 bytes. Each context maps 2^44 bytes,
* so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
*/
#define NO_CONTEXT 0
#define MAX_CONTEXT ((1UL << 19) - 1)
extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
extern void destroy_context(struct mm_struct *mm);
extern void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next);
extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
extern void set_context(unsigned long id, pgd_t *pgd);
/*
* switch_mm is the entry point called from the architecture independent
......@@ -244,22 +30,39 @@ extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
cpu_set(smp_processor_id(), next->cpu_vm_mask);
/* Mark this context has been used on the new CPU */
cpu_set(smp_processor_id(), next->cpu_vm_mask);
/* 32-bit keeps track of the current PGDIR in the thread struct */
#ifdef CONFIG_PPC32
tsk->thread.pgdir = next->pgd;
#endif /* CONFIG_PPC32 */
/* No need to flush userspace segments if the mm doesnt change */
/* Nothing else to do if we aren't actually switching */
if (prev == next)
return;
/* We must stop all altivec streams before changing the HW
* context
*/
#ifdef CONFIG_ALTIVEC
if (cpu_has_feature(CPU_FTR_ALTIVEC))
asm volatile ("dssall");
#endif /* CONFIG_ALTIVEC */
/* The actual HW switching method differs between the various
* sub architectures.
*/
#ifdef CONFIG_PPC_STD_MMU_64
if (cpu_has_feature(CPU_FTR_SLB))
switch_slb(tsk, next);
else
switch_stab(tsk, next);
#else
/* Out of line for now */
switch_mmu_context(prev, next);
#endif
}
#define deactivate_mm(tsk,mm) do { } while (0)
......@@ -277,6 +80,11 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
local_irq_restore(flags);
}
#endif /* CONFIG_PPC64 */
/* We don't currently use enter_lazy_tlb() for anything */
static inline void enter_lazy_tlb(struct mm_struct *mm,
struct task_struct *tsk)
{
}
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
......@@ -60,6 +60,7 @@ int main(void)
{
DEFINE(THREAD, offsetof(struct task_struct, thread));
DEFINE(MM, offsetof(struct task_struct, mm));
DEFINE(MMCONTEXTID, offsetof(struct mm_struct, context.id));
#ifdef CONFIG_PPC64
DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
#else
......
......@@ -31,6 +31,7 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
#include <asm/bug.h>
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
......@@ -1070,9 +1071,14 @@ start_here:
RFI
/*
* void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next);
*
* Set up the segment registers for a new context.
*/
_ENTRY(set_context)
_ENTRY(switch_mmu_context)
lwz r3,MMCONTEXTID(r4)
cmpwi cr0,r3,0
blt- 4f
mulli r3,r3,897 /* multiply context by skew factor */
rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */
addis r3,r3,0x6000 /* Set Ks, Ku bits */
......@@ -1083,6 +1089,7 @@ _ENTRY(set_context)
/* Context switch the PTE pointer for the Abatron BDI2000.
* The PGDIR is passed as second argument.
*/
lwz r4,MM_PGD(r4)
lis r5, KERNELBASE@h
lwz r5, 0xf0(r5)
stw r4, 0x4(r5)
......@@ -1098,6 +1105,9 @@ _ENTRY(set_context)
sync
isync
blr
4: trap
EMIT_BUG_ENTRY 4b,__FILE__,__LINE__,0
blr
/*
* An undocumented "feature" of 604e requires that the v bit
......
......@@ -174,8 +174,7 @@ EXPORT_SYMBOL(cacheable_memcpy);
#endif
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(next_mmu_context);
EXPORT_SYMBOL(set_context);
EXPORT_SYMBOL(switch_mmu_context);
#endif
#ifdef CONFIG_PPC_STD_MMU_32
......
......@@ -34,6 +34,6 @@ void save_processor_state(void)
void restore_processor_state(void)
{
#ifdef CONFIG_PPC32
set_context(current->active_mm->context.id, current->active_mm->pgd);
switch_mmu_context(NULL, current->active_mm);
#endif
}
......@@ -8,15 +8,16 @@ endif
obj-y := fault.o mem.o pgtable.o \
init_$(CONFIG_WORD_SIZE).o \
pgtable_$(CONFIG_WORD_SIZE).o \
mmu_context_$(CONFIG_WORD_SIZE).o
pgtable_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o
hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC64) += hash_utils_64.o \
slb_low.o slb.o stab.o \
gup.o mmap.o $(hash-y)
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
tlb_hash$(CONFIG_WORD_SIZE).o
tlb_hash$(CONFIG_WORD_SIZE).o \
mmu_context_hash$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_40x) += 40x_mmu.o
obj-$(CONFIG_44x) += 44x_mmu.o
obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o
......
......@@ -28,57 +28,76 @@
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
unsigned long next_mmu_context;
unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
#ifdef FEW_CONTEXTS
atomic_t nr_free_contexts;
struct mm_struct *context_mm[LAST_CONTEXT+1];
void steal_context(void);
#endif /* FEW_CONTEXTS */
/*
* On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
* (virtual segment identifiers) for each context. Although the
* hardware supports 24-bit VSIDs, and thus >1 million contexts,
* we only use 32,768 of them. That is ample, since there can be
* at most around 30,000 tasks in the system anyway, and it means
* that we can use a bitmap to indicate which contexts are in use.
* Using a bitmap means that we entirely avoid all of the problems
* that we used to have when the context number overflowed,
* particularly on SMP systems.
* -- paulus.
*/
#define NO_CONTEXT ((unsigned long) -1)
#define LAST_CONTEXT 32767
#define FIRST_CONTEXT 1
/*
* Initialize the context management stuff.
* This function defines the mapping from contexts to VSIDs (virtual
* segment IDs). We use a skew on both the context and the high 4 bits
* of the 32-bit virtual address (the "effective segment ID") in order
* to spread out the entries in the MMU hash table. Note, if this
* function is changed then arch/ppc/mm/hashtable.S will have to be
* changed to correspond.
*
*
* CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
* & 0xffffff)
*/
void __init
mmu_context_init(void)
static unsigned long next_mmu_context;
static unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
/*
* Set up the context for a new address space.
*/
int init_new_context(struct task_struct *t, struct mm_struct *mm)
{
/*
* Some processors have too few contexts to reserve one for
* init_mm, and require using context 0 for a normal task.
* Other processors reserve the use of context zero for the kernel.
* This code assumes FIRST_CONTEXT < 32.
*/
context_map[0] = (1 << FIRST_CONTEXT) - 1;
next_mmu_context = FIRST_CONTEXT;
#ifdef FEW_CONTEXTS
atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
#endif /* FEW_CONTEXTS */
unsigned long ctx = next_mmu_context;
while (test_and_set_bit(ctx, context_map)) {
ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
if (ctx > LAST_CONTEXT)
ctx = 0;
}
next_mmu_context = (ctx + 1) & LAST_CONTEXT;
mm->context.id = ctx;
return 0;
}
#ifdef FEW_CONTEXTS
/*
* Steal a context from a task that has one at the moment.
* This is only used on 8xx and 4xx and we presently assume that
* they don't do SMP. If they do then this will have to check
* whether the MM we steal is in use.
* We also assume that this is only used on systems that don't
* use an MMU hash table - this is true for 8xx and 4xx.
* This isn't an LRU system, it just frees up each context in
* turn (sort-of pseudo-random replacement :). This would be the
* place to implement an LRU scheme if anyone was motivated to do it.
* -- paulus
* We're finished using the context for an address space.
*/
void
steal_context(void)
void destroy_context(struct mm_struct *mm)
{
struct mm_struct *mm;
preempt_disable();
if (mm->context.id != NO_CONTEXT) {
clear_bit(mm->context.id, context_map);
mm->context.id = NO_CONTEXT;
}
preempt_enable();
}
/* free up context `next_mmu_context' */
/* if we shouldn't free context 0, don't... */
if (next_mmu_context < FIRST_CONTEXT)
next_mmu_context = FIRST_CONTEXT;
mm = context_mm[next_mmu_context];
flush_tlb_mm(mm);
destroy_context(mm);
/*
* Initialize the context management stuff.
*/
void __init mmu_context_init(void)
{
/* Reserve context 0 for kernel use */
context_map[0] = (1 << FIRST_CONTEXT) - 1;
next_mmu_context = FIRST_CONTEXT;
}
#endif /* FEW_CONTEXTS */
......@@ -24,6 +24,14 @@
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDR(mmu_context_idr);
/*
* The proto-VSID space has 2^35 - 1 segments available for user mappings.
* Each segment contains 2^28 bytes. Each context maps 2^44 bytes,
* so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
*/
#define NO_CONTEXT 0
#define MAX_CONTEXT ((1UL << 19) - 1)
int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
int index;
......
/*
* This file contains the routines for handling the MMU on those
* PowerPC implementations where the MMU is not using the hash
* table, such as 8xx, 4xx, BookE's etc...
*
* Copyright 2008 Ben Herrenschmidt <benh@kernel.crashing.org>
* IBM Corp.
*
* Derived from previous arch/powerpc/mm/mmu_context.c
* and arch/powerpc/include/asm/mmu_context.h
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
/*
* The MPC8xx has only 16 contexts. We rotate through them on each
* task switch. A better way would be to keep track of tasks that
* own contexts, and implement an LRU usage. That way very active
* tasks don't always have to pay the TLB reload overhead. The
* kernel pages are mapped shared, so the kernel can run on behalf
* of any task that makes a kernel entry. Shared does not mean they
* are not protected, just that the ASID comparison is not performed.
* -- Dan
*
* The IBM4xx has 256 contexts, so we can just rotate through these
* as a way of "switching" contexts. If the TID of the TLB is zero,
* the PID/TID comparison is disabled, so we can use a TID of zero
* to represent all kernel pages as shared among all contexts.
* -- Dan
*/
#ifdef CONFIG_8xx
#define NO_CONTEXT 16
#define LAST_CONTEXT 15
#define FIRST_CONTEXT 0
#elif defined(CONFIG_4xx)
#define NO_CONTEXT 256
#define LAST_CONTEXT 255
#define FIRST_CONTEXT 1
#elif defined(CONFIG_E200) || defined(CONFIG_E500)
#define NO_CONTEXT 256
#define LAST_CONTEXT 255
#define FIRST_CONTEXT 1
#else
#error Unsupported processor type
#endif
static unsigned long next_mmu_context;
static unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
static atomic_t nr_free_contexts;
static struct mm_struct *context_mm[LAST_CONTEXT+1];
static void steal_context(void);
/* Steal a context from a task that has one at the moment.
* This is only used on 8xx and 4xx and we presently assume that
* they don't do SMP. If they do then this will have to check
* whether the MM we steal is in use.
* We also assume that this is only used on systems that don't
* use an MMU hash table - this is true for 8xx and 4xx.
* This isn't an LRU system, it just frees up each context in
* turn (sort-of pseudo-random replacement :). This would be the
* place to implement an LRU scheme if anyone was motivated to do it.
* -- paulus
*/
static void steal_context(void)
{
struct mm_struct *mm;
/* free up context `next_mmu_context' */
/* if we shouldn't free context 0, don't... */
if (next_mmu_context < FIRST_CONTEXT)
next_mmu_context = FIRST_CONTEXT;
mm = context_mm[next_mmu_context];
flush_tlb_mm(mm);
destroy_context(mm);
}
/*
* Get a new mmu context for the address space described by `mm'.
*/
static inline void get_mmu_context(struct mm_struct *mm)
{
unsigned long ctx;
if (mm->context.id != NO_CONTEXT)
return;
while (atomic_dec_if_positive(&nr_free_contexts) < 0)
steal_context();
ctx = next_mmu_context;
while (test_and_set_bit(ctx, context_map)) {
ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
if (ctx > LAST_CONTEXT)
ctx = 0;
}
next_mmu_context = (ctx + 1) & LAST_CONTEXT;
mm->context.id = ctx;
context_mm[ctx] = mm;
}
void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
{
get_mmu_context(next);
set_context(next->context.id, next->pgd);
}
/*
* Set up the context for a new address space.
*/
int init_new_context(struct task_struct *t, struct mm_struct *mm)
{
mm->context.id = NO_CONTEXT;
return 0;
}
/*
* We're finished using the context for an address space.
*/
void destroy_context(struct mm_struct *mm)
{
preempt_disable();
if (mm->context.id != NO_CONTEXT) {
clear_bit(mm->context.id, context_map);
mm->context.id = NO_CONTEXT;
atomic_inc(&nr_free_contexts);
}
preempt_enable();
}
/*
* Initialize the context management stuff.
*/
void __init mmu_context_init(void)
{
/*
* Some processors have too few contexts to reserve one for
* init_mm, and require using context 0 for a normal task.
* Other processors reserve the use of context zero for the kernel.
* This code assumes FIRST_CONTEXT < 32.
*/
context_map[0] = (1 << FIRST_CONTEXT) - 1;
next_mmu_context = FIRST_CONTEXT;
atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
}
......@@ -195,13 +195,21 @@ config SPE
config PPC_STD_MMU
bool
depends on 6xx || POWER3 || POWER4 || PPC64
depends on 6xx || PPC64
default y
config PPC_STD_MMU_32
def_bool y
depends on PPC_STD_MMU && PPC32
config PPC_STD_MMU_64
def_bool y
depends on PPC_STD_MMU && PPC64
config PPC_MMU_NOHASH
def_bool y
depends on !PPC_STD_MMU
config PPC_MM_SLICES
bool
default y if HUGETLB_PAGE || PPC_64K_PAGES
......
......@@ -310,7 +310,7 @@ static int pmu_set_cpu_speed(int low_speed)
_set_L3CR(save_l3cr);
/* Restore userland MMU context */
set_context(current->active_mm->context.id, current->active_mm->pgd);
switch_mmu_context(NULL, current->active_mm);
#ifdef DEBUG_FREQ
printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
......
......@@ -1814,7 +1814,7 @@ static int powerbook_sleep_grackle(void)
_set_L2CR(save_l2cr);
/* Restore userland MMU context */
set_context(current->active_mm->context.id, current->active_mm->pgd);
switch_mmu_context(NULL, current->active_mm);
/* Power things up */
pmu_unlock();
......@@ -1903,7 +1903,7 @@ powerbook_sleep_Core99(void)
_set_L3CR(save_l3cr);
/* Restore userland MMU context */
set_context(current->active_mm->context.id, current->active_mm->pgd);
switch_mmu_context(NULL, current->active_mm);
/* Tell PMU we are ready */
pmu_unlock();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册