提交 5d07b786 编写于 作者: D Daniel Hellstrom 提交者: David S. Miller

sparc32,leon: add GRPCI2 PCI Host driver

The DMA region must be accessible in order for PCI peripheral
drivers to work, the sparc32 has DMA in the normal memory
zone which requires the GRPCI2 to PCI target BARs so that all
kernel low mem (192MB) can be mapped 1:1 to PCI address
space. The GRPCI2 has resizeable target BARs, by default the
first is made 256MB and all other BARs are disabled.

I/O space are always located on 0x1000-0x10000, but accessed
through the GRPCI2 PCI I/O Window memory mapped to virtual
address space.

Configuration space is accessed through the 64KB GRPCI2 PCI
CFG Window using LDA bypassing the MMU.

The GRPCI2 has a single PCI Window for prefetchable and non-
prefetchable address space, it is up to the AHB master
requesting PCI data to determine access type. Memory space
is mapped 1:1.

The GRPCI2 core can be configured in 4 different IRQ modes,
where PCI Interrupt, Error Interrupt and DMA Interrupt are
shared on a single IRQ line or at most 5 IRQs are used. The
GRPCI2 can mask/unmask PCI interrupts, Err and DMA in the control
and check status bits which tells us which IRQ really happended.
The GENIRQ layer is used to unmask/mask each individual IRQ
source by creating virtual IRQs and implementing a IRQ chip.

The optional DMA functionality of the GRPCI2 is not supported
by this patch.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 26893c13
......@@ -538,6 +538,13 @@ config LEON_PCI
depends on PCI && SPARC_LEON
default y
config GRPCI2
bool "GRPCI2 Host Bridge Support"
depends on LEON_PCI
default y
help
Say Y here to include the GRPCI2 Host Bridge Driver.
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
......
......@@ -318,6 +318,9 @@ struct device_node;
extern unsigned int leon_build_device_irq(unsigned int real_irq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack);
extern void leon_update_virq_handling(unsigned int virq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack);
extern void leon_clear_clock_irq(void);
extern void leon_load_profile_irq(int cpu, unsigned int limit);
extern void leon_init_timers(irq_handler_t counter_fn);
......
......@@ -75,6 +75,7 @@ obj-y += dma.o
obj-$(CONFIG_PCIC_PCI) += pcic.o
obj-$(CONFIG_LEON_PCI) += leon_pci.o
obj-$(CONFIG_GRPCI2) += leon_pci_grpci2.o
obj-$(CONFIG_SMP) += trampoline_$(BITS).o smp_$(BITS).o
obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o
......
......@@ -236,6 +236,21 @@ static unsigned int _leon_build_device_irq(struct platform_device *op,
return leon_build_device_irq(real_irq, handle_simple_irq, "edge", 0);
}
void leon_update_virq_handling(unsigned int virq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack)
{
unsigned long mask = (unsigned long)irq_get_chip_data(virq);
mask &= ~LEON_DO_ACK_HW;
if (do_ack)
mask |= LEON_DO_ACK_HW;
irq_set_chip_and_handler_name(virq, &leon_irq,
flow_handler, name);
irq_set_chip_data(virq, (void *)mask);
}
void __init leon_init_timers(irq_handler_t counter_fn)
{
int irq, eirq;
......
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册