提交 5c61259e 编写于 作者: Z Zhao Yakui 提交者: Dave Airlie

drm/mode: get the modeline for standard timing in EDID by using CVT/GTF

Create the standard timing modeline by using CVT/GFT algorithm while
interpreting the EDID.

In course of interpreting the EDID, the timing level will be obtained,
which is used to determine whether the CVT/GTF algorithm is selected to
generate the modeline for the given hdisplay/vdisplay/vrefresh_rate.
In the UMS mode firstly it will check whether it can be found in
the DMT table. If it can be found, then the modeline is returned. Then the
timing_level is used to choose CVT/GTF.
As there is no DMT table, no modeline is returned when timing level
is DMT. For the other two timing levels, the CVT/GTF will be called to
generate the required standard timing modeline.

[airlied: fixed up conflicts since EDID rework]
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>
上级 26bbdada
......@@ -61,6 +61,10 @@
/* use +hsync +vsync for detailed mode */
#define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6)
#define LEVEL_DMT 0
#define LEVEL_GTF 1
#define LEVEL_CVT 2
static struct edid_quirk {
char *vendor;
int product_id;
......@@ -240,25 +244,31 @@ static void edid_fixup_preferred(struct drm_connector *connector,
/**
* drm_mode_std - convert standard mode info (width, height, refresh) into mode
* @t: standard timing params
* @timing_level: standard timing level
*
* Take the standard timing params (in this case width, aspect, and refresh)
* and convert them into a real mode using CVT.
* and convert them into a real mode using CVT/GTF/DMT.
*
* Punts for now, but should eventually use the FB layer's CVT based mode
* generation code.
*/
struct drm_display_mode *drm_mode_std(struct drm_device *dev,
struct std_timing *t)
struct std_timing *t,
int timing_level)
{
struct drm_display_mode *mode;
int hsize = t->hsize * 8 + 248, vsize;
int hsize, vsize;
int vrefresh_rate;
unsigned aspect_ratio = (t->vfreq_aspect & EDID_TIMING_ASPECT_MASK)
>> EDID_TIMING_ASPECT_SHIFT;
mode = drm_mode_create(dev);
if (!mode)
return NULL;
unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
>> EDID_TIMING_VFREQ_SHIFT;
/* According to the EDID spec, the hdisplay = hsize * 8 + 248 */
hsize = t->hsize * 8 + 248;
/* vrefresh_rate = vfreq + 60 */
vrefresh_rate = vfreq + 60;
/* the vdisplay is calculated based on the aspect ratio */
if (aspect_ratio == 0)
vsize = (hsize * 10) / 16;
else if (aspect_ratio == 1)
......@@ -268,8 +278,23 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
else
vsize = (hsize * 9) / 16;
drm_mode_set_name(mode);
mode = NULL;
switch (timing_level) {
case LEVEL_DMT:
mode = drm_mode_create(dev);
if (mode) {
mode->hdisplay = hsize;
mode->vdisplay = vsize;
drm_mode_set_name(mode);
}
break;
case LEVEL_GTF:
mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
break;
case LEVEL_CVT:
mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
break;
}
return mode;
}
......@@ -451,6 +476,19 @@ static int add_established_modes(struct drm_connector *connector, struct edid *e
return modes;
}
/**
* stanard_timing_level - get std. timing level(CVT/GTF/DMT)
* @edid: EDID block to scan
*/
static int standard_timing_level(struct edid *edid)
{
if (edid->revision >= 2) {
if (edid->revision >= 4 && (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF))
return LEVEL_CVT;
return LEVEL_GTF;
}
return LEVEL_DMT;
}
/**
* add_standard_modes - get std. modes from EDID and add them
......@@ -463,6 +501,9 @@ static int add_standard_modes(struct drm_connector *connector, struct edid *edid
{
struct drm_device *dev = connector->dev;
int i, modes = 0;
int timing_level;
timing_level = standard_timing_level(edid);
for (i = 0; i < EDID_STD_TIMINGS; i++) {
struct std_timing *t = &edid->standard_timings[i];
......@@ -472,7 +513,8 @@ static int add_standard_modes(struct drm_connector *connector, struct edid *edid
if (t->hsize == 1 && t->vfreq_aspect == 1)
continue;
newmode = drm_mode_std(dev, &edid->standard_timings[i]);
newmode = drm_mode_std(dev, &edid->standard_timings[i],
timing_level);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
......@@ -496,6 +538,9 @@ static int add_detailed_info(struct drm_connector *connector,
{
struct drm_device *dev = connector->dev;
int i, j, modes = 0;
int timing_level;
timing_level = standard_timing_level(edid);
for (i = 0; i < EDID_DETAILED_TIMINGS; i++) {
struct detailed_timing *timing = &edid->detailed_timings[i];
......@@ -541,7 +586,8 @@ static int add_detailed_info(struct drm_connector *connector,
struct drm_display_mode *newmode;
std = &data->data.timings[j];
newmode = drm_mode_std(dev, std);
newmode = drm_mode_std(dev, std,
timing_level);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册