提交 5a677ce0 编写于 作者: M Marc Zyngier 提交者: Christoffer Dall

ARM: KVM: switch to a dual-step HYP init code

Our HYP init code suffers from two major design issues:
- it cannot support CPU hotplug, as we tear down the idmap very early
- it cannot perform a TLB invalidation when switching from init to
  runtime mappings, as pages are manipulated from PL1 exclusively

The hotplug problem mandates that we keep two sets of page tables
(boot and runtime). The TLB problem mandates that we're able to
transition from one PGD to another while in HYP, invalidating the TLBs
in the process.

To be able to do this, we need to share a page between the two page
tables. A page that will have the same VA in both configurations. All we
need is a VA that has the following properties:
- This VA can't be used to represent a kernel mapping.
- This VA will not conflict with the physical address of the kernel text

The vectors page seems to satisfy this requirement:
- The kernel never maps anything else there
- The kernel text being copied at the beginning of the physical memory,
  it is unlikely to use the last 64kB (I doubt we'll ever support KVM
  on a system with something like 4MB of RAM, but patches are very
  welcome).

Let's call this VA the trampoline VA.

Now, we map our init page at 3 locations:
- idmap in the boot pgd
- trampoline VA in the boot pgd
- trampoline VA in the runtime pgd

The init scenario is now the following:
- We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd,
  runtime stack, runtime vectors
- Enable the MMU with the boot pgd
- Jump to a target into the trampoline page (remember, this is the same
  physical page!)
- Now switch to the runtime pgd (same VA, and still the same physical
  page!)
- Invalidate TLBs
- Set stack and vectors
- Profit! (or eret, if you only care about the code).

Note that we keep the boot mapping permanently (it is not strictly an
idmap anymore) to allow for CPU hotplug in later patches.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu>
上级 4f728276
......@@ -188,23 +188,30 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *);
int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
int exception_index);
static inline void __cpu_init_hyp_mode(unsigned long long pgd_ptr,
static inline void __cpu_init_hyp_mode(unsigned long long boot_pgd_ptr,
unsigned long long pgd_ptr,
unsigned long hyp_stack_ptr,
unsigned long vector_ptr)
{
unsigned long pgd_low, pgd_high;
pgd_low = (pgd_ptr & ((1ULL << 32) - 1));
pgd_high = (pgd_ptr >> 32ULL);
/*
* Call initialization code, and switch to the full blown
* HYP code. The init code doesn't need to preserve these registers as
* r1-r3 and r12 are already callee save according to the AAPCS.
* Note that we slightly misuse the prototype by casing the pgd_low to
* a void *.
* Call initialization code, and switch to the full blown HYP
* code. The init code doesn't need to preserve these
* registers as r0-r3 are already callee saved according to
* the AAPCS.
* Note that we slightly misuse the prototype by casing the
* stack pointer to a void *.
*
* We don't have enough registers to perform the full init in
* one go. Install the boot PGD first, and then install the
* runtime PGD, stack pointer and vectors. The PGDs are always
* passed as the third argument, in order to be passed into
* r2-r3 to the init code (yes, this is compliant with the
* PCS!).
*/
kvm_call_hyp((void *)pgd_low, pgd_high, hyp_stack_ptr, vector_ptr);
kvm_call_hyp(NULL, 0, boot_pgd_ptr);
kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
}
int kvm_perf_init(void);
......
......@@ -19,17 +19,29 @@
#ifndef __ARM_KVM_MMU_H__
#define __ARM_KVM_MMU_H__
#include <asm/cacheflush.h>
#include <asm/pgalloc.h>
#include <asm/memory.h>
#include <asm/page.h>
/*
* We directly use the kernel VA for the HYP, as we can directly share
* the mapping (HTTBR "covers" TTBR1).
*/
#define HYP_PAGE_OFFSET_MASK (~0UL)
#define HYP_PAGE_OFFSET_MASK UL(~0)
#define HYP_PAGE_OFFSET PAGE_OFFSET
#define KERN_TO_HYP(kva) (kva)
/*
* Our virtual mapping for the boot-time MMU-enable code. Must be
* shared across all the page-tables. Conveniently, we use the vectors
* page, where no kernel data will ever be shared with HYP.
*/
#define TRAMPOLINE_VA UL(CONFIG_VECTORS_BASE)
#ifndef __ASSEMBLY__
#include <asm/cacheflush.h>
#include <asm/pgalloc.h>
int create_hyp_mappings(void *from, void *to);
int create_hyp_io_mappings(void *from, void *to, phys_addr_t);
void free_hyp_pgds(void);
......@@ -44,6 +56,8 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run);
void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
phys_addr_t kvm_mmu_get_httbr(void);
phys_addr_t kvm_mmu_get_boot_httbr(void);
phys_addr_t kvm_get_idmap_vector(void);
int kvm_mmu_init(void);
void kvm_clear_hyp_idmap(void);
......@@ -113,4 +127,8 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn)
}
}
#define kvm_flush_dcache_to_poc(a,l) __cpuc_flush_dcache_area((a), (l))
#endif /* !__ASSEMBLY__ */
#endif /* __ARM_KVM_MMU_H__ */
......@@ -787,20 +787,22 @@ long kvm_arch_vm_ioctl(struct file *filp,
static void cpu_init_hyp_mode(void *vector)
{
unsigned long long boot_pgd_ptr;
unsigned long long pgd_ptr;
unsigned long hyp_stack_ptr;
unsigned long stack_page;
unsigned long vector_ptr;
/* Switch from the HYP stub to our own HYP init vector */
__hyp_set_vectors((unsigned long)vector);
__hyp_set_vectors(kvm_get_idmap_vector());
boot_pgd_ptr = (unsigned long long)kvm_mmu_get_boot_httbr();
pgd_ptr = (unsigned long long)kvm_mmu_get_httbr();
stack_page = __get_cpu_var(kvm_arm_hyp_stack_page);
hyp_stack_ptr = stack_page + PAGE_SIZE;
vector_ptr = (unsigned long)__kvm_hyp_vector;
__cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr);
__cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr);
}
/**
......@@ -853,11 +855,6 @@ static int init_hyp_mode(void)
(void *)(long)init_phys_addr, 1);
}
/*
* Unmap the identity mapping
*/
kvm_clear_hyp_idmap();
/*
* Map the Hyp-code called directly from the host
*/
......
......@@ -21,13 +21,33 @@
#include <asm/asm-offsets.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_mmu.h>
/********************************************************************
* Hypervisor initialization
* - should be called with:
* r0,r1 = Hypervisor pgd pointer
* r2 = top of Hyp stack (kernel VA)
* r3 = pointer to hyp vectors
* r0 = top of Hyp stack (kernel VA)
* r1 = pointer to hyp vectors
* r2,r3 = Hypervisor pgd pointer
*
* The init scenario is:
* - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd,
* runtime stack, runtime vectors
* - Enable the MMU with the boot pgd
* - Jump to a target into the trampoline page (remember, this is the same
* physical page!)
* - Now switch to the runtime pgd (same VA, and still the same physical
* page!)
* - Invalidate TLBs
* - Set stack and vectors
* - Profit! (or eret, if you only care about the code).
*
* As we only have four registers available to pass parameters (and we
* need six), we split the init in two phases:
* - Phase 1: r0 = 0, r1 = 0, r2,r3 contain the boot PGD.
* Provides the basic HYP init, and enable the MMU.
* - Phase 2: r0 = ToS, r1 = vectors, r2,r3 contain the runtime PGD.
* Switches to the runtime PGD, set stack and vectors.
*/
.text
......@@ -47,22 +67,25 @@ __kvm_hyp_init:
W(b) .
__do_hyp_init:
cmp r0, #0 @ We have a SP?
bne phase2 @ Yes, second stage init
@ Set the HTTBR to point to the hypervisor PGD pointer passed
mcrr p15, 4, r0, r1, c2
mcrr p15, 4, r2, r3, c2
@ Set the HTCR and VTCR to the same shareability and cacheability
@ settings as the non-secure TTBCR and with T0SZ == 0.
mrc p15, 4, r0, c2, c0, 2 @ HTCR
ldr r12, =HTCR_MASK
bic r0, r0, r12
ldr r2, =HTCR_MASK
bic r0, r0, r2
mrc p15, 0, r1, c2, c0, 2 @ TTBCR
and r1, r1, #(HTCR_MASK & ~TTBCR_T0SZ)
orr r0, r0, r1
mcr p15, 4, r0, c2, c0, 2 @ HTCR
mrc p15, 4, r1, c2, c1, 2 @ VTCR
ldr r12, =VTCR_MASK
bic r1, r1, r12
ldr r2, =VTCR_MASK
bic r1, r1, r2
bic r0, r0, #(~VTCR_HTCR_SH) @ clear non-reusable HTCR bits
orr r1, r0, r1
orr r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S)
......@@ -85,24 +108,41 @@ __do_hyp_init:
@ - Memory alignment checks: enabled
@ - MMU: enabled (this code must be run from an identity mapping)
mrc p15, 4, r0, c1, c0, 0 @ HSCR
ldr r12, =HSCTLR_MASK
bic r0, r0, r12
ldr r2, =HSCTLR_MASK
bic r0, r0, r2
mrc p15, 0, r1, c1, c0, 0 @ SCTLR
ldr r12, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
and r1, r1, r12
ARM( ldr r12, =(HSCTLR_M | HSCTLR_A) )
THUMB( ldr r12, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) )
orr r1, r1, r12
ldr r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
and r1, r1, r2
ARM( ldr r2, =(HSCTLR_M | HSCTLR_A) )
THUMB( ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) )
orr r1, r1, r2
orr r0, r0, r1
isb
mcr p15, 4, r0, c1, c0, 0 @ HSCR
isb
@ Set stack pointer and return to the kernel
mov sp, r2
@ End of init phase-1
eret
phase2:
@ Set stack pointer
mov sp, r0
@ Set HVBAR to point to the HYP vectors
mcr p15, 4, r3, c12, c0, 0 @ HVBAR
mcr p15, 4, r1, c12, c0, 0 @ HVBAR
@ Jump to the trampoline page
ldr r0, =TRAMPOLINE_VA
adr r1, target
bfi r0, r1, #0, #PAGE_SHIFT
mov pc, r0
target: @ We're now in the trampoline code, switch page tables
mcrr p15, 4, r2, r3, c2
isb
@ Invalidate the old TLBs
mcr p15, 4, r0, c8, c7, 0 @ TLBIALLH
dsb
eret
......
......@@ -32,9 +32,15 @@
extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
static pgd_t *boot_hyp_pgd;
static pgd_t *hyp_pgd;
static DEFINE_MUTEX(kvm_hyp_pgd_mutex);
static void *init_bounce_page;
static unsigned long hyp_idmap_start;
static unsigned long hyp_idmap_end;
static phys_addr_t hyp_idmap_vector;
static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
{
kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
......@@ -152,9 +158,12 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size)
/**
* free_hyp_pgds - free Hyp-mode page tables
*
* Assumes hyp_pgd is a page table used strictly in Hyp-mode and therefore contains
* either mappings in the kernel memory area (above PAGE_OFFSET), or
* device mappings in the vmalloc range (from VMALLOC_START to VMALLOC_END).
* Assumes hyp_pgd is a page table used strictly in Hyp-mode and
* therefore contains either mappings in the kernel memory area (above
* PAGE_OFFSET), or device mappings in the vmalloc range (from
* VMALLOC_START to VMALLOC_END).
*
* boot_hyp_pgd should only map two pages for the init code.
*/
void free_hyp_pgds(void)
{
......@@ -162,6 +171,12 @@ void free_hyp_pgds(void)
mutex_lock(&kvm_hyp_pgd_mutex);
if (boot_hyp_pgd) {
unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
kfree(boot_hyp_pgd);
}
if (hyp_pgd) {
for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE)
unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
......@@ -170,6 +185,7 @@ void free_hyp_pgds(void)
kfree(hyp_pgd);
}
kfree(init_bounce_page);
mutex_unlock(&kvm_hyp_pgd_mutex);
}
......@@ -185,6 +201,7 @@ static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start,
pte = pte_offset_kernel(pmd, addr);
kvm_set_pte(pte, pfn_pte(pfn, prot));
get_page(virt_to_page(pte));
kvm_flush_dcache_to_poc(pte, sizeof(*pte));
pfn++;
} while (addr += PAGE_SIZE, addr != end);
}
......@@ -211,6 +228,7 @@ static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start,
}
pmd_populate_kernel(NULL, pmd, pte);
get_page(virt_to_page(pmd));
kvm_flush_dcache_to_poc(pmd, sizeof(*pmd));
}
next = pmd_addr_end(addr, end);
......@@ -248,6 +266,7 @@ static int __create_hyp_mappings(pgd_t *pgdp,
}
pud_populate(NULL, pud, pmd);
get_page(virt_to_page(pud));
kvm_flush_dcache_to_poc(pud, sizeof(*pud));
}
next = pgd_addr_end(addr, end);
......@@ -689,18 +708,64 @@ void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu)
phys_addr_t kvm_mmu_get_httbr(void)
{
VM_BUG_ON(!virt_addr_valid(hyp_pgd));
return virt_to_phys(hyp_pgd);
}
phys_addr_t kvm_mmu_get_boot_httbr(void)
{
return virt_to_phys(boot_hyp_pgd);
}
phys_addr_t kvm_get_idmap_vector(void)
{
return hyp_idmap_vector;
}
int kvm_mmu_init(void)
{
unsigned long hyp_idmap_start = virt_to_phys(__hyp_idmap_text_start);
unsigned long hyp_idmap_end = virt_to_phys(__hyp_idmap_text_end);
int err;
hyp_idmap_start = virt_to_phys(__hyp_idmap_text_start);
hyp_idmap_end = virt_to_phys(__hyp_idmap_text_end);
hyp_idmap_vector = virt_to_phys(__kvm_hyp_init);
if ((hyp_idmap_start ^ hyp_idmap_end) & PAGE_MASK) {
/*
* Our init code is crossing a page boundary. Allocate
* a bounce page, copy the code over and use that.
*/
size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start;
phys_addr_t phys_base;
init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!init_bounce_page) {
kvm_err("Couldn't allocate HYP init bounce page\n");
err = -ENOMEM;
goto out;
}
memcpy(init_bounce_page, __hyp_idmap_text_start, len);
/*
* Warning: the code we just copied to the bounce page
* must be flushed to the point of coherency.
* Otherwise, the data may be sitting in L2, and HYP
* mode won't be able to observe it as it runs with
* caches off at that point.
*/
kvm_flush_dcache_to_poc(init_bounce_page, len);
phys_base = virt_to_phys(init_bounce_page);
hyp_idmap_vector += phys_base - hyp_idmap_start;
hyp_idmap_start = phys_base;
hyp_idmap_end = phys_base + len;
kvm_info("Using HYP init bounce page @%lx\n",
(unsigned long)phys_base);
}
hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
if (!hyp_pgd) {
boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
if (!hyp_pgd || !boot_hyp_pgd) {
kvm_err("Hyp mode PGD not allocated\n");
err = -ENOMEM;
goto out;
......@@ -718,39 +783,30 @@ int kvm_mmu_init(void)
goto out;
}
/* Map the very same page at the trampoline VA */
err = __create_hyp_mappings(boot_hyp_pgd,
TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE,
__phys_to_pfn(hyp_idmap_start),
PAGE_HYP);
if (err) {
kvm_err("Failed to map trampoline @%lx into boot HYP pgd\n",
TRAMPOLINE_VA);
goto out;
}
/* Map the same page again into the runtime page tables */
err = __create_hyp_mappings(hyp_pgd,
TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE,
__phys_to_pfn(hyp_idmap_start),
PAGE_HYP);
if (err) {
kvm_err("Failed to map trampoline @%lx into runtime HYP pgd\n",
TRAMPOLINE_VA);
goto out;
}
return 0;
out:
free_hyp_pgds();
return err;
}
/**
* kvm_clear_idmap - remove all idmaps from the hyp pgd
*
* Free the underlying pmds for all pgds in range and clear the pgds (but
* don't free them) afterwards.
*/
void kvm_clear_hyp_idmap(void)
{
unsigned long addr, end;
unsigned long next;
pgd_t *pgd = hyp_pgd;
pud_t *pud;
pmd_t *pmd;
addr = virt_to_phys(__hyp_idmap_text_start);
end = virt_to_phys(__hyp_idmap_text_end);
pgd += pgd_index(addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
pud = pud_offset(pgd, addr);
pmd = pmd_offset(pud, addr);
pud_clear(pud);
kvm_clean_pmd_entry(pmd);
pmd_free(NULL, (pmd_t *)((unsigned long)pmd & PAGE_MASK));
} while (pgd++, addr = next, addr < end);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册