提交 58b087cd 编写于 作者: J Jim Cromie 提交者: Linus Torvalds

[PATCH] chardev: GPIO for SCx200 & PC-8736x: add platform_device for use w dev_dbg

Adds platform-device to (just introduced) driver, and uses it to replace many
printks with dev_dbg() etc.  This could trivially be merged into previous
patch, but this way matches better with the corresponding patch that does the
same change to scx200_gpio.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 681a3e7d
......@@ -17,13 +17,14 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/nsc_gpio.h>
#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#define NAME "pc8736x_gpio"
#define DEVNAME "pc8736x_gpio"
MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
MODULE_DESCRIPTION("NatSemi SCx200 GPIO Pin Driver");
MODULE_DESCRIPTION("NatSemi PC-8736x GPIO Pin Driver");
MODULE_LICENSE("GPL");
static int major; /* default to dynamic major */
......@@ -42,6 +43,8 @@ static unsigned pc8736x_gpio_base;
#define SIO_CF1 0x21 /* chip config, bit0 is chip enable */
#define PC8736X_GPIO_SIZE 16
#define SIO_UNIT_SEL 0x7 /* unit select reg */
#define SIO_UNIT_ACT 0x30 /* unit enable */
#define SIO_GPIO_UNIT 0x7 /* unit number of GPIO */
......@@ -69,6 +72,8 @@ static int port_offset[] = { 0, 4, 8, 10 }; /* non-uniform offsets ! */
#define PORT_EVT_EN 2
#define PORT_EVT_STST 3
static struct platform_device *pdev; /* use in dev_*() */
static inline void superio_outb(int addr, int val)
{
outb_p(addr, superio_cmd);
......@@ -148,9 +153,9 @@ static int pc8736x_gpio_get(unsigned minor)
val >>= bit;
val &= 1;
printk(KERN_INFO NAME ": _gpio_get(%d from %x bit %d) == val %d\n",
minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
val);
dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n",
minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
val);
return val;
}
......@@ -164,22 +169,21 @@ static void pc8736x_gpio_set(unsigned minor, int val)
bit = minor & 7;
curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
printk(KERN_INFO NAME
": addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",
pc8736x_gpio_base + port_offset[port] + PORT_OUT,
curval, bit, (curval & ~(1 << bit)), val, (val << bit));
dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",
pc8736x_gpio_base + port_offset[port] + PORT_OUT,
curval, bit, (curval & ~(1 << bit)), val, (val << bit));
val = (curval & ~(1 << bit)) | (val << bit);
printk(KERN_INFO NAME ": gpio_set(minor:%d port:%d bit:%d"
") %2x -> %2x\n", minor, port, bit, curval, val);
dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)"
" %2x -> %2x\n", minor, port, bit, curval, val);
outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT);
curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
printk(KERN_INFO NAME ": wrote %x, read: %x\n", curval, val);
dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val);
}
static void pc8736x_gpio_set_high(unsigned index)
......@@ -194,7 +198,7 @@ static void pc8736x_gpio_set_low(unsigned index)
static int pc8736x_gpio_current(unsigned index)
{
printk(KERN_WARNING NAME ": pc8736x_gpio_current unimplemented\n");
dev_warn(&pdev->dev, "pc8736x_gpio_current unimplemented\n");
return 0;
}
......@@ -222,7 +226,7 @@ static int pc8736x_gpio_open(struct inode *inode, struct file *file)
unsigned m = iminor(inode);
file->private_data = &pc8736x_access;
printk(KERN_NOTICE NAME " open %d\n", m);
dev_dbg(&pdev->dev, "open %d\n", m);
if (m > 63)
return -EINVAL;
......@@ -230,21 +234,31 @@ static int pc8736x_gpio_open(struct inode *inode, struct file *file)
}
static struct file_operations pc8736x_gpio_fops = {
.owner = THIS_MODULE,
.open = pc8736x_gpio_open,
.write = nsc_gpio_write,
.read = nsc_gpio_read,
.owner = THIS_MODULE,
.open = pc8736x_gpio_open,
.write = nsc_gpio_write,
.read = nsc_gpio_read,
};
static int __init pc8736x_gpio_init(void)
{
int r, rc;
int rc = 0;
pdev = platform_device_alloc(DEVNAME, 0);
if (!pdev)
return -ENOMEM;
printk(KERN_DEBUG NAME " initializing\n");
rc = platform_device_add(pdev);
if (rc) {
rc = -ENODEV;
goto undo_platform_dev_alloc;
}
dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n");
if (!pc8736x_superio_present()) {
printk(KERN_ERR NAME ": no device found\n");
return -ENODEV;
rc = -ENODEV;
dev_err(&pdev->dev, "no device found\n");
goto undo_platform_dev_add;
}
/* Verify that chip and it's GPIO unit are both enabled.
......@@ -252,44 +266,56 @@ static int __init pc8736x_gpio_init(void)
*/
rc = superio_inb(SIO_CF1);
if (!(rc & 0x01)) {
printk(KERN_ERR NAME ": device not enabled\n");
return -ENODEV;
rc = -ENODEV;
dev_err(&pdev->dev, "device not enabled\n");
goto undo_platform_dev_add;
}
device_select(SIO_GPIO_UNIT);
if (!superio_inb(SIO_UNIT_ACT)) {
printk(KERN_ERR NAME ": GPIO unit not enabled\n");
return -ENODEV;
rc = -ENODEV;
dev_err(&pdev->dev, "GPIO unit not enabled\n");
goto undo_platform_dev_add;
}
/* read GPIO unit base address */
/* read the GPIO unit base addr that chip responds to */
pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
| superio_inb(SIO_BASE_LADDR));
if (request_region(pc8736x_gpio_base, 16, NAME))
printk(KERN_INFO NAME ": GPIO ioport %x reserved\n",
pc8736x_gpio_base);
if (!request_region(pc8736x_gpio_base, 16, DEVNAME)) {
rc = -ENODEV;
dev_err(&pdev->dev, "GPIO ioport %x busy\n",
pc8736x_gpio_base);
goto undo_platform_dev_add;
}
dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base);
r = register_chrdev(major, NAME, &pc8736x_gpio_fops);
if (r < 0) {
printk(KERN_ERR NAME ": unable to register character device\n");
return r;
rc = register_chrdev(major, DEVNAME, &pc8736x_gpio_fops);
if (rc < 0) {
dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc);
goto undo_platform_dev_add;
}
if (!major) {
major = r;
printk(KERN_DEBUG NAME ": got dynamic major %d\n", major);
major = rc;
dev_dbg(&pdev->dev, "got dynamic major %d\n", major);
}
pc8736x_init_shadow();
return 0;
undo_platform_dev_add:
platform_device_put(pdev);
undo_platform_dev_alloc:
kfree(pdev);
return rc;
}
static void __exit pc8736x_gpio_cleanup(void)
{
printk(KERN_DEBUG NAME " cleanup\n");
dev_dbg(&pdev->dev, " cleanup\n");
release_region(pc8736x_gpio_base, 16);
unregister_chrdev(major, NAME);
unregister_chrdev(major, DEVNAME);
}
module_init(pc8736x_gpio_init);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册