[ARM] 3802/1: S3C24XX: PM tidy up cache flushing

Change to using flush_cache_all() in pm.c and
also remove the need to flush the cache in the
PM code.

This changes the sleep.S code to have an entry
to store the registers for resume, and then a
second entry (after the caches are cleaned)
to do the suspend and resume.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-s3c2410/pm.c

@@ -35,6 +35,7 @@
 #include <linux/ioport.h>
 #include <linux/delay.h>
 
+#include <asm/cacheflush.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 
@@ -52,14 +53,6 @@
 
 unsigned long s3c_pm_flags;
 
-/* cache functions from arch/arm/mm/proc-arm920.S */
-
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-extern void arm920_flush_kern_cache_all(void);
-#else
-static void arm920_flush_kern_cache_all(void) { }
-#endif
-
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
@@ -567,7 +560,7 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	/* flush cache back to ram */
 
-	arm920_flush_kern_cache_all();
+	flush_cache_all();
 
 	s3c2410_pm_check_store();
 
@@ -575,7 +568,14 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
 
-	s3c2410_cpu_suspend(regs_save);
+	/* s3c2410_cpu_save will also act as our return point from when
+	 * we resume as it saves its own register state, so use the return
+	 * code to differentiate return from save and return from sleep */
+
+	if (s3c2410_cpu_save(regs_save) == 0) {
+		flush_cache_all();
+		s3c2410_cpu_suspend();
+	}
 
 	/* restore the cpu state */
 

arch/arm/mach-s3c2410/pm.h

@@ -40,7 +40,8 @@ extern unsigned long s3c_pm_flags;
 
 /* from sleep.S */
 
-extern void s3c2410_cpu_suspend(unsigned long *saveblk);
+extern int  s3c2410_cpu_save(unsigned long *saveblk);
+extern void s3c2410_cpu_suspend(void);
 extern void s3c2410_cpu_resume(void);
 
 extern unsigned long s3c2410_sleep_save_phys;

arch/arm/mach-s3c2410/sleep.S

@@ -41,15 +41,25 @@
 
 	.text
 
-	/* s3c2410_cpu_suspend
+	/* s3c2410_cpu_save
 	 *
-	 * put the cpu into sleep mode
+	 * save enough of the CPU state to allow us to re-start
+	 * pm.c code. as we store items like the sp/lr, we will
+	 * end up returning from this function when the cpu resumes
+	 * so the return value is set to mark this.
+	 *
+	 * This arangement means we avoid having to flush the cache
+	 * from this code.
 	 *
 	 * entry:
-	 *	r0 = sleep save block
+	 *	r0 = pointer to save block
+	 *
+	 * exit:
+	 *	r0 = 0 => we stored everything
+	 *	     1 => resumed from sleep
 	*/
 
-ENTRY(s3c2410_cpu_suspend)
+ENTRY(s3c2410_cpu_save)
 	stmfd	sp!, { r4 - r12, lr }
 
 	@@ store co-processor registers
@@ -62,13 +72,15 @@ ENTRY(s3c2410_cpu_suspend)
 
 	stmia	r0, { r4 - r13 }
 
-	@@ flush the caches to ensure everything is back out to
-	@@ SDRAM before the core powers down
+	mov	r0, #0
+	ldmfd	sp, { r4 - r12, pc }
 
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bl	arm920_flush_kern_cache_all
-#endif
+	/* s3c2410_cpu_suspend
+	 *
+	 * put the cpu into sleep mode
+	*/
 
+ENTRY(s3c2410_cpu_suspend)
 	@@ prepare cpu to sleep
 
 	ldr	r4, =S3C2410_REFRESH
@@ -100,6 +112,7 @@ s3c2410_do_sleep:
 	@@ turned on, this restores the last bits from the
 	@@ stack
 resume_with_mmu:
+	mov	r0, #1
 	ldmfd	sp!, { r4 - r12, pc }
 
 	.ltorg