提交 56bc911a 编写于 作者: S Sylwester Nawrocki 提交者: Mauro Carvalho Chehab

[media] s5p-fimc: Redefine platform data structure for fimc-is

Newer Exynos4 SoC are equipped with a local camera ISP that
controls external raw image sensor directly. Such sensors
can be connected through FIMC-LITEn (and MIPI-CSISn) IPs to
the ISP, which then feeds image data to the FIMCn IP. Thus
there can be two busses associated with an image source
(sensor). Rename struct s5p_fimc_isp_info describing external
image sensor (video decoder) to struct fimc_source_info to
avoid confusion. bus_type is split into fimc_bus_type and
sensor_bus_type. The bus type enumeration is extended to
include both FIMC Writeback input types.
The bus_type enumeration and the data structure name in the
board files are modified according to the above changes.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 b84ef24e
......@@ -1209,25 +1209,25 @@ static struct i2c_board_info m5mols_board_info = {
.platform_data = &m5mols_platdata,
};
static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
static struct fimc_source_info nuri_camera_sensors[] = {
{
.flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_ITU_601,
.fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &s5k6aa_board_info,
.clk_frequency = 24000000UL,
.i2c_bus_num = 6,
}, {
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_MIPI_CSI2,
.fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2,
.board_info = &m5mols_board_info,
.clk_frequency = 24000000UL,
},
};
static struct s5p_platform_fimc fimc_md_platdata = {
.isp_info = nuri_camera_sensors,
.source_info = nuri_camera_sensors,
.num_clients = ARRAY_SIZE(nuri_camera_sensors),
};
......
......@@ -988,12 +988,12 @@ static struct i2c_board_info m5mols_board_info = {
.platform_data = &m5mols_platdata,
};
static struct s5p_fimc_isp_info universal_camera_sensors[] = {
static struct fimc_source_info universal_camera_sensors[] = {
{
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_ITU_601,
.fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &s5k6aa_board_info,
.i2c_bus_num = 0,
.clk_frequency = 24000000UL,
......@@ -1001,7 +1001,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_MIPI_CSI2,
.fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
.clk_frequency = 24000000UL,
......@@ -1009,7 +1009,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
};
static struct s5p_platform_fimc fimc_md_platdata = {
.isp_info = universal_camera_sensors,
.source_info = universal_camera_sensors,
.num_clients = ARRAY_SIZE(universal_camera_sensors),
};
......
......@@ -841,12 +841,12 @@ static struct i2c_board_info noon010pc30_board_info = {
.platform_data = &noon010pc30_pldata,
};
static struct s5p_fimc_isp_info goni_camera_sensors[] = {
static struct fimc_source_info goni_camera_sensors[] = {
{
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_ITU_601,
.bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &noon010pc30_board_info,
.i2c_bus_num = 0,
.clk_frequency = 16000000UL,
......@@ -854,7 +854,7 @@ static struct s5p_fimc_isp_info goni_camera_sensors[] = {
};
static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
.isp_info = goni_camera_sensors,
.source_info = goni_camera_sensors,
.num_clients = ARRAY_SIZE(goni_camera_sensors),
};
......
......@@ -187,12 +187,12 @@ static void flite_hw_set_camera_port(struct fimc_lite *dev, int id)
/* Select serial or parallel bus, camera port (A,B) and set signals polarity */
void flite_hw_set_camera_bus(struct fimc_lite *dev,
struct s5p_fimc_isp_info *s_info)
struct fimc_source_info *si)
{
u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
unsigned int flags = s_info->flags;
unsigned int flags = si->flags;
if (s_info->bus_type != FIMC_MIPI_CSI2) {
if (si->sensor_bus_type != FIMC_BUS_TYPE_MIPI_CSI2) {
cfg &= ~(FLITE_REG_CIGCTRL_SELCAM_MIPI |
FLITE_REG_CIGCTRL_INVPOLPCLK |
FLITE_REG_CIGCTRL_INVPOLVSYNC |
......@@ -212,7 +212,7 @@ void flite_hw_set_camera_bus(struct fimc_lite *dev,
writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
flite_hw_set_camera_port(dev, s_info->mux_id);
flite_hw_set_camera_port(dev, si->mux_id);
}
static void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f)
......
......@@ -131,9 +131,9 @@ void flite_hw_set_interrupt_mask(struct fimc_lite *dev);
void flite_hw_capture_start(struct fimc_lite *dev);
void flite_hw_capture_stop(struct fimc_lite *dev);
void flite_hw_set_camera_bus(struct fimc_lite *dev,
struct s5p_fimc_isp_info *s_info);
struct fimc_source_info *s_info);
void flite_hw_set_camera_polarity(struct fimc_lite *dev,
struct s5p_fimc_isp_info *cam);
struct fimc_source_info *cam);
void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f);
void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f);
......
......@@ -290,7 +290,7 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
for (i = 0; i < num_clients; i++) {
struct v4l2_subdev *sd;
fmd->sensor[i].pdata = pdata->isp_info[i];
fmd->sensor[i].pdata = pdata->source_info[i];
ret = __fimc_md_set_camclk(fmd, &fmd->sensor[i], true);
if (ret)
break;
......@@ -504,7 +504,7 @@ static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd,
struct v4l2_subdev *sensor,
int pad, int link_mask)
{
struct fimc_sensor_info *s_info;
struct fimc_sensor_info *s_info = NULL;
struct media_entity *sink;
unsigned int flags = 0;
int ret, i;
......@@ -614,7 +614,7 @@ static int fimc_md_create_links(struct fimc_md *fmd)
{
struct v4l2_subdev *csi_sensors[CSIS_MAX_ENTITIES] = { NULL };
struct v4l2_subdev *sensor, *csis;
struct s5p_fimc_isp_info *pdata;
struct fimc_source_info *pdata;
struct fimc_sensor_info *s_info;
struct media_entity *source, *sink;
int i, pad, fimc_id = 0, ret = 0;
......@@ -632,8 +632,8 @@ static int fimc_md_create_links(struct fimc_md *fmd)
source = NULL;
pdata = &s_info->pdata;
switch (pdata->bus_type) {
case FIMC_MIPI_CSI2:
switch (pdata->sensor_bus_type) {
case FIMC_BUS_TYPE_MIPI_CSI2:
if (WARN(pdata->mux_id >= CSIS_MAX_ENTITIES,
"Wrong CSI channel id: %d\n", pdata->mux_id))
return -EINVAL;
......@@ -659,14 +659,14 @@ static int fimc_md_create_links(struct fimc_md *fmd)
csi_sensors[pdata->mux_id] = sensor;
break;
case FIMC_ITU_601...FIMC_ITU_656:
case FIMC_BUS_TYPE_ITU_601...FIMC_BUS_TYPE_ITU_656:
source = &sensor->entity;
pad = 0;
break;
default:
v4l2_err(&fmd->v4l2_dev, "Wrong bus_type: %x\n",
pdata->bus_type);
pdata->sensor_bus_type);
return -EINVAL;
}
if (source == NULL)
......@@ -762,7 +762,7 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd,
struct fimc_sensor_info *s_info,
bool on)
{
struct s5p_fimc_isp_info *pdata = &s_info->pdata;
struct fimc_source_info *pdata = &s_info->pdata;
struct fimc_camclk_info *camclk;
int ret = 0;
......
......@@ -53,7 +53,7 @@ struct fimc_camclk_info {
* This data structure applies to image sensor and the writeback subdevs.
*/
struct fimc_sensor_info {
struct s5p_fimc_isp_info pdata;
struct fimc_source_info pdata;
struct v4l2_subdev *subdev;
struct fimc_dev *host;
};
......
......@@ -554,7 +554,7 @@ void fimc_hw_set_output_addr(struct fimc_dev *dev,
}
int fimc_hw_set_camera_polarity(struct fimc_dev *fimc,
struct s5p_fimc_isp_info *cam)
struct fimc_source_info *cam)
{
u32 cfg = readl(fimc->regs + FIMC_REG_CIGCTRL);
......@@ -596,14 +596,15 @@ static const struct mbus_pixfmt_desc pix_desc[] = {
};
int fimc_hw_set_camera_source(struct fimc_dev *fimc,
struct s5p_fimc_isp_info *cam)
struct fimc_source_info *source)
{
struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame;
u32 cfg = 0;
u32 bus_width;
u32 bus_width, cfg = 0;
int i;
if (cam->bus_type == FIMC_ITU_601 || cam->bus_type == FIMC_ITU_656) {
switch (source->fimc_bus_type) {
case FIMC_BUS_TYPE_ITU_601:
case FIMC_BUS_TYPE_ITU_656:
for (i = 0; i < ARRAY_SIZE(pix_desc); i++) {
if (fimc->vid_cap.mf.code == pix_desc[i].pixelcode) {
cfg = pix_desc[i].cisrcfmt;
......@@ -619,15 +620,17 @@ int fimc_hw_set_camera_source(struct fimc_dev *fimc,
return -EINVAL;
}
if (cam->bus_type == FIMC_ITU_601) {
if (source->fimc_bus_type == FIMC_BUS_TYPE_ITU_601) {
if (bus_width == 8)
cfg |= FIMC_REG_CISRCFMT_ITU601_8BIT;
else if (bus_width == 16)
cfg |= FIMC_REG_CISRCFMT_ITU601_16BIT;
} /* else defaults to ITU-R BT.656 8-bit */
} else if (cam->bus_type == FIMC_MIPI_CSI2) {
break;
case FIMC_BUS_TYPE_MIPI_CSI2:
if (fimc_fmt_is_user_defined(f->fmt->color))
cfg |= FIMC_REG_CISRCFMT_ITU601_8BIT;
break;
}
cfg |= (f->o_width << 16) | f->o_height;
......@@ -655,7 +658,7 @@ void fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f)
}
int fimc_hw_set_camera_type(struct fimc_dev *fimc,
struct s5p_fimc_isp_info *cam)
struct fimc_source_info *source)
{
u32 cfg, tmp;
struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
......@@ -668,11 +671,11 @@ int fimc_hw_set_camera_type(struct fimc_dev *fimc,
FIMC_REG_CIGCTRL_SELCAM_MIPI | FIMC_REG_CIGCTRL_CAMIF_SELWB |
FIMC_REG_CIGCTRL_SELCAM_MIPI_A | FIMC_REG_CIGCTRL_CAM_JPEG);
switch (cam->bus_type) {
case FIMC_MIPI_CSI2:
switch (source->fimc_bus_type) {
case FIMC_BUS_TYPE_MIPI_CSI2:
cfg |= FIMC_REG_CIGCTRL_SELCAM_MIPI;
if (cam->mux_id == 0)
if (source->mux_id == 0)
cfg |= FIMC_REG_CIGCTRL_SELCAM_MIPI_A;
/* TODO: add remaining supported formats. */
......@@ -695,15 +698,16 @@ int fimc_hw_set_camera_type(struct fimc_dev *fimc,
writel(tmp, fimc->regs + FIMC_REG_CSIIMGFMT);
break;
case FIMC_ITU_601...FIMC_ITU_656:
if (cam->mux_id == 0) /* ITU-A, ITU-B: 0, 1 */
case FIMC_BUS_TYPE_ITU_601...FIMC_BUS_TYPE_ITU_656:
if (source->mux_id == 0) /* ITU-A, ITU-B: 0, 1 */
cfg |= FIMC_REG_CIGCTRL_SELCAM_ITU_A;
break;
case FIMC_LCD_WB:
case FIMC_BUS_TYPE_LCD_WRITEBACK_A:
cfg |= FIMC_REG_CIGCTRL_CAMIF_SELWB;
break;
default:
v4l2_err(&vid_cap->vfd, "Invalid camera bus type selected\n");
v4l2_err(&vid_cap->vfd, "Invalid FIMC bus type selected: %d\n",
source->fimc_bus_type);
return -EINVAL;
}
writel(cfg, fimc->regs + FIMC_REG_CIGCTRL);
......
......@@ -297,12 +297,12 @@ void fimc_hw_set_input_addr(struct fimc_dev *fimc, struct fimc_addr *paddr);
void fimc_hw_set_output_addr(struct fimc_dev *fimc, struct fimc_addr *paddr,
int index);
int fimc_hw_set_camera_source(struct fimc_dev *fimc,
struct s5p_fimc_isp_info *cam);
struct fimc_source_info *cam);
void fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f);
int fimc_hw_set_camera_polarity(struct fimc_dev *fimc,
struct s5p_fimc_isp_info *cam);
struct fimc_source_info *cam);
int fimc_hw_set_camera_type(struct fimc_dev *fimc,
struct s5p_fimc_isp_info *cam);
struct fimc_source_info *cam);
void fimc_hw_clear_irq(struct fimc_dev *dev);
void fimc_hw_enable_scaler(struct fimc_dev *dev, bool on);
void fimc_hw_activate_input_dma(struct fimc_dev *dev, bool on);
......
/*
* Samsung S5P SoC camera interface driver header
* Samsung S5P/Exynos4 SoC series camera interface driver header
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd
* Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
* Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd.
* Sylwester Nawrocki <s.nawrocki@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -14,45 +14,58 @@
#include <media/media-entity.h>
enum cam_bus_type {
FIMC_ITU_601 = 1,
FIMC_ITU_656,
FIMC_MIPI_CSI2,
FIMC_LCD_WB, /* FIFO link from LCD mixer */
/*
* Enumeration of the FIMC data bus types.
*/
enum fimc_bus_type {
/* Camera parallel bus */
FIMC_BUS_TYPE_ITU_601 = 1,
/* Camera parallel bus with embedded synchronization */
FIMC_BUS_TYPE_ITU_656,
/* Camera MIPI-CSI2 serial bus */
FIMC_BUS_TYPE_MIPI_CSI2,
/* FIFO link from LCD controller (WriteBack A) */
FIMC_BUS_TYPE_LCD_WRITEBACK_A,
/* FIFO link from LCD controller (WriteBack B) */
FIMC_BUS_TYPE_LCD_WRITEBACK_B,
/* FIFO link from FIMC-IS */
FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B,
};
struct i2c_board_info;
/**
* struct s5p_fimc_isp_info - image sensor information required for host
* interace configuration.
* struct fimc_source_info - video source description required for the host
* interface configuration
*
* @board_info: pointer to I2C subdevice's board info
* @clk_frequency: frequency of the clock the host interface provides to sensor
* @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
* @fimc_bus_type: FIMC camera input type
* @sensor_bus_type: image sensor bus type, MIPI, ITU-R BT.601 etc.
* @flags: the parallel sensor bus flags defining signals polarity (V4L2_MBUS_*)
* @i2c_bus_num: i2c control bus id the sensor is attached to
* @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
* @clk_id: index of the SoC peripheral clock for sensors
* @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*)
*/
struct s5p_fimc_isp_info {
struct fimc_source_info {
struct i2c_board_info *board_info;
unsigned long clk_frequency;
enum cam_bus_type bus_type;
enum fimc_bus_type fimc_bus_type;
enum fimc_bus_type sensor_bus_type;
u16 flags;
u16 i2c_bus_num;
u16 mux_id;
u16 flags;
u8 clk_id;
};
/**
* struct s5p_platform_fimc - camera host interface platform data
*
* @isp_info: properties of camera sensor required for host interface setup
* @num_clients: the number of attached image sensors
* @source_info: properties of an image source for the host interface setup
* @num_clients: the number of attached image sources
*/
struct s5p_platform_fimc {
struct s5p_fimc_isp_info *isp_info;
struct fimc_source_info *source_info;
int num_clients;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册