提交 564ea9bb 编写于 作者: B Bruce Allan 提交者: David S. Miller

e1000e: set bools to true/false instead of 1/0

Set booleans to 'true' or 'false' to make it clear it is a boolean.  Also
change instances of TRUE/FALSE in comments to lowercase true/false.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 84efb7b9
......@@ -230,7 +230,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
/* Set rar entry count */
mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
? true : false;
/* check for link */
switch (hw->phy.media_type) {
......@@ -753,7 +754,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
/**
* e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
* @hw: pointer to the HW structure
* @active: TRUE to enable LPLU, FALSE to disable
* @active: true to enable LPLU, false to disable
*
* Sets the LPLU D0 state according to the active flag. When activating LPLU
* this function also disables smart speed and vice versa. LPLU will not be
......@@ -1521,7 +1522,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
{
if (hw->mac.type != e1000_82571)
return 0;
return false;
return hw->dev_spec.e82571.laa_is_present;
}
......
......@@ -213,7 +213,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
/* Set rar entry count */
mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
? true : false;
/* check for link */
switch (hw->phy.media_type) {
......
......@@ -401,7 +401,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
/* Clear shadow ram */
for (i = 0; i < nvm->word_size; i++) {
dev_spec->shadow_ram[i].modified = 0;
dev_spec->shadow_ram[i].modified = false;
dev_spec->shadow_ram[i].value = 0xFFFF;
}
......@@ -430,7 +430,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
if (mac->type == e1000_ich8lan)
mac->rar_entry_count--;
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid = 1;
mac->arc_subsystem_valid = true;
/* LED operations */
switch (mac->type) {
......@@ -464,7 +464,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
/* Enable PCS Lock-loss workaround for ICH8 */
if (mac->type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1);
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
return 0;
}
......@@ -1403,7 +1403,7 @@ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
/**
* e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
* @hw: pointer to the HW structure
* @active: TRUE to enable LPLU, FALSE to disable
* @active: true to enable LPLU, false to disable
*
* Sets the LPLU D0 state according to the active flag. When
* activating LPLU this function also disables smart speed
......@@ -1489,7 +1489,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
/**
* e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
* @hw: pointer to the HW structure
* @active: TRUE to enable LPLU, FALSE to disable
* @active: true to enable LPLU, false to disable
*
* Sets the LPLU D3 state according to the active flag. When
* activating LPLU this function also disables smart speed
......@@ -1952,7 +1952,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
nvm->ops.acquire(hw);
for (i = 0; i < words; i++) {
dev_spec->shadow_ram[offset+i].modified = 1;
dev_spec->shadow_ram[offset+i].modified = true;
dev_spec->shadow_ram[offset+i].value = data[i];
}
......@@ -2111,7 +2111,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
/* Great! Everything worked, we can now clear the cached entries. */
for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
dev_spec->shadow_ram[i].modified = 0;
dev_spec->shadow_ram[i].modified = false;
dev_spec->shadow_ram[i].value = 0xFFFF;
}
......@@ -3083,8 +3083,8 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
* @state: boolean value used to set the current Kumeran workaround state
*
* If ICH8, set the current Kumeran workaround state (enabled - TRUE
* /disabled - FALSE).
* If ICH8, set the current Kumeran workaround state (enabled - true
* /disabled - false).
**/
void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
bool state)
......
......@@ -371,7 +371,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
if (!link)
return ret_val; /* No link detected */
mac->get_link_status = 0;
mac->get_link_status = false;
/*
* Check if there was DownShift, must be checked
......@@ -1603,7 +1603,7 @@ void e1000e_reset_adaptive(struct e1000_hw *hw)
mac->ifs_step_size = IFS_STEP;
mac->ifs_ratio = IFS_RATIO;
mac->in_ifs_mode = 0;
mac->in_ifs_mode = false;
ew32(AIT, 0);
}
......@@ -1620,7 +1620,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
if (mac->tx_packet_delta > MIN_NUM_XMITS) {
mac->in_ifs_mode = 1;
mac->in_ifs_mode = true;
if (mac->current_ifs_val < mac->ifs_max_val) {
if (!mac->current_ifs_val)
mac->current_ifs_val = mac->ifs_min_val;
......@@ -1634,7 +1634,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
if (mac->in_ifs_mode &&
(mac->tx_packet_delta <= MIN_NUM_XMITS)) {
mac->current_ifs_val = 0;
mac->in_ifs_mode = 0;
mac->in_ifs_mode = false;
ew32(AIT, 0);
}
}
......@@ -2277,7 +2277,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
/* No manageability, no filtering */
if (!e1000e_check_mng_mode(hw)) {
hw->mac.tx_pkt_filtering = 0;
hw->mac.tx_pkt_filtering = false;
return 0;
}
......@@ -2287,7 +2287,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
*/
ret_val = e1000_mng_enable_host_if(hw);
if (ret_val != 0) {
hw->mac.tx_pkt_filtering = 0;
hw->mac.tx_pkt_filtering = false;
return ret_val;
}
......@@ -2306,17 +2306,17 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
* take the safe route of assuming Tx filtering is enabled.
*/
if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
hw->mac.tx_pkt_filtering = 1;
hw->mac.tx_pkt_filtering = true;
return 1;
}
/* Cookie area is valid, make the final check for filtering. */
if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
hw->mac.tx_pkt_filtering = 0;
hw->mac.tx_pkt_filtering = false;
return 0;
}
hw->mac.tx_pkt_filtering = 1;
hw->mac.tx_pkt_filtering = true;
return 1;
}
......@@ -2473,7 +2473,7 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
{
u32 manc;
u32 fwsm, factps;
bool ret_val = 0;
bool ret_val = false;
manc = er32(MANC);
......@@ -2488,13 +2488,13 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
if (!(factps & E1000_FACTPS_MNGCG) &&
((fwsm & E1000_FWSM_MODE_MASK) ==
(e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
ret_val = 1;
ret_val = true;
return ret_val;
}
} else {
if ((manc & E1000_MANC_SMBUS_EN) &&
!(manc & E1000_MANC_ASF_EN)) {
ret_val = 1;
ret_val = true;
return ret_val;
}
}
......
......@@ -834,7 +834,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
msleep(100);
/* disable lplu d0 during driver init */
ret_val = e1000_set_d0_lplu_state(hw, 0);
ret_val = e1000_set_d0_lplu_state(hw, false);
if (ret_val) {
e_dbg("Error Disabling LPLU D0\n");
return ret_val;
......@@ -1545,7 +1545,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
break;
default:
/* speed downshift not supported */
phy->speed_downgraded = 0;
phy->speed_downgraded = false;
return 0;
}
......@@ -1907,7 +1907,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
return -E1000_ERR_CONFIG;
}
phy->polarity_correction = 1;
phy->polarity_correction = true;
ret_val = e1000_check_polarity_igp(hw);
if (ret_val)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册