提交 55b61fec 编写于 作者: S Stephen Rothwell 提交者: Paul Mackerras

[POWERPC] Rename device_is_compatible to of_device_is_compatible

for consistency with other Open Firmware interfaces (and Sparc).

This is just a straight replacement.

This leaves the compatibility define in place.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 d9333afd
......@@ -243,9 +243,9 @@ static int __init add_legacy_pci_port(struct device_node *np,
* doesn't work for these settings, you'll have to add your own special
* cases here
*/
if (device_is_compatible(pci_dev, "pci13a8,152") ||
device_is_compatible(pci_dev, "pci13a8,154") ||
device_is_compatible(pci_dev, "pci13a8,158")) {
if (of_device_is_compatible(pci_dev, "pci13a8,152") ||
of_device_is_compatible(pci_dev, "pci13a8,154") ||
of_device_is_compatible(pci_dev, "pci13a8,158")) {
addr += 0x200 * lindex;
base += 0x200 * lindex;
} else {
......@@ -364,11 +364,11 @@ void __init find_legacy_serial_ports(void)
/* Check for known pciclass, and also check wether we have
* a device with child nodes for ports or not
*/
if (device_is_compatible(np, "pciclass,0700") ||
device_is_compatible(np, "pciclass,070002"))
if (of_device_is_compatible(np, "pciclass,0700") ||
of_device_is_compatible(np, "pciclass,070002"))
pci = np;
else if (device_is_compatible(parent, "pciclass,0700") ||
device_is_compatible(parent, "pciclass,070002"))
else if (of_device_is_compatible(parent, "pciclass,0700") ||
of_device_is_compatible(parent, "pciclass,070002"))
pci = parent;
else {
of_node_put(parent);
......
......@@ -27,7 +27,7 @@ const struct of_device_id *of_match_node(const struct of_device_id *matches,
match &= node->type
&& !strcmp(matches->type, node->type);
if (matches->compatible[0])
match &= device_is_compatible(node,
match &= of_device_is_compatible(node,
matches->compatible);
if (match)
return matches;
......
......@@ -117,7 +117,7 @@ static const struct vio_device_id *vio_match_device(
{
while (ids->type[0] != '\0') {
if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) &&
device_is_compatible(dev->dev.archdata.of_node,
of_device_is_compatible(dev->dev.archdata.of_node,
ids->compat))
return ids;
ids++;
......
......@@ -84,7 +84,7 @@ void __init mpc8544_ds_pic_init(void)
#ifdef CONFIG_PPC_I8259
/* Initialize the i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}
......
......@@ -197,7 +197,7 @@ static void __init mpc85xx_cds_pic_init(void)
#ifdef CONFIG_PPC_I8259
/* Initialize the i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}
......
......@@ -102,7 +102,7 @@ mpc86xx_hpcn_init_irq(void)
#ifdef CONFIG_PCI
/* Initialize i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}
......
......@@ -227,7 +227,7 @@ void iic_request_IPIs(void)
static int iic_host_match(struct irq_host *h, struct device_node *node)
{
return device_is_compatible(node,
return of_device_is_compatible(node,
"IBM,CBEA-Internal-Interrupt-Controller");
}
......@@ -256,7 +256,7 @@ static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
unsigned int node, ext, unit, class;
const u32 *val;
if (!device_is_compatible(ct,
if (!of_device_is_compatible(ct,
"IBM,CBEA-Internal-Interrupt-Controller"))
return -ENODEV;
if (intsize != 1)
......@@ -324,7 +324,7 @@ static int __init setup_iic(void)
for (dn = NULL;
(dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) {
if (!device_is_compatible(dn,
if (!of_device_is_compatible(dn,
"IBM,CBEA-Internal-Interrupt-Controller"))
continue;
np = of_get_property(dn, "ibm,interrupt-server-ranges", NULL);
......
......@@ -112,7 +112,7 @@ static void __init mpic_init_IRQ(void)
for (dn = NULL;
(dn = of_find_node_by_name(dn, "interrupt-controller"));) {
if (!device_is_compatible(dn, "CBEA,platform-open-pic"))
if (!of_device_is_compatible(dn, "CBEA,platform-open-pic"))
continue;
/* The MPIC driver will get everything it needs from the
......
......@@ -358,12 +358,12 @@ void __init spider_init_IRQ(void)
*/
for (dn = NULL;
(dn = of_find_node_by_name(dn, "interrupt-controller"));) {
if (device_is_compatible(dn, "CBEA,platform-spider-pic")) {
if (of_device_is_compatible(dn, "CBEA,platform-spider-pic")) {
if (of_address_to_resource(dn, 0, &r)) {
printk(KERN_WARNING "spider-pic: Failed\n");
continue;
}
} else if (device_is_compatible(dn, "sti,platform-spider-pic")
} else if (of_device_is_compatible(dn, "sti,platform-spider-pic")
&& (chip < 2)) {
static long hard_coded_pics[] =
{ 0x24000008000ul, 0x34000008000ul};
......
......@@ -267,7 +267,7 @@ chrp_find_bridges(void)
model = of_get_property(dev, "model", NULL);
if (model == NULL)
model = "<none>";
if (device_is_compatible(dev, "IBM,python")) {
if (of_device_is_compatible(dev, "IBM,python")) {
setup_python(hose, dev);
} else if (is_mot
|| strncmp(model, "Motorola, Grackle", 17) == 0) {
......
......@@ -448,7 +448,7 @@ static void __init chrp_find_8259(void)
/* Look for cascade */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
pic = np;
break;
}
......
......@@ -467,15 +467,15 @@ static int __init add_bridge(struct device_node *dev)
hose->last_busno = bus_range ? bus_range[1] : 0xff;
disp_name = NULL;
if (device_is_compatible(dev, "u3-agp")) {
if (of_device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (device_is_compatible(dev, "u3-ht")) {
} else if (of_device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
} else if (device_is_compatible(dev, "u4-pcie")) {
} else if (of_device_is_compatible(dev, "u4-pcie")) {
setup_u4_pcie(hose);
disp_name = "U4-PCIE";
primary = 0;
......@@ -556,12 +556,12 @@ void __init maple_pci_init(void)
continue;
if (strcmp(np->type, "pci") && strcmp(np->type, "ht"))
continue;
if ((device_is_compatible(np, "u4-pcie") ||
device_is_compatible(np, "u3-agp")) &&
if ((of_device_is_compatible(np, "u4-pcie") ||
of_device_is_compatible(np, "u3-agp")) &&
add_bridge(np) == 0)
of_node_get(np);
if (device_is_compatible(np, "u3-ht")) {
if (of_device_is_compatible(np, "u3-ht")) {
of_node_get(np);
ht = np;
}
......
......@@ -231,7 +231,7 @@ static void __init maple_init_IRQ(void)
*/
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "open-pic")) {
if (of_device_is_compatible(np, "open-pic")) {
mpic_node = np;
break;
}
......
......@@ -114,7 +114,7 @@ static __init void pas_init_IRQ(void)
mpic_node = NULL;
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "open-pic")) {
if (of_device_is_compatible(np, "open-pic")) {
mpic_node = np;
break;
}
......
......@@ -1418,7 +1418,7 @@ static long g5_eth_phy_reset(struct device_node *node, long param, long value)
phy = of_get_next_child(node, NULL);
if (!phy)
return -ENODEV;
need_reset = device_is_compatible(phy, "B5221");
need_reset = of_device_is_compatible(phy, "B5221");
of_node_put(phy);
if (!need_reset)
return 0;
......@@ -2624,7 +2624,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
if (!compat)
break;
if (device_is_compatible(node, compat))
if (of_device_is_compatible(node, compat))
break;
}
if (!node)
......@@ -2728,7 +2728,7 @@ initial_serial_shutdown(struct device_node *np)
conn = of_get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
port_type = PMAC_SCC_IRDA;
else if (device_is_compatible(np, "cobalt"))
else if (of_device_is_compatible(np, "cobalt"))
modem = 1;
else if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
......@@ -2787,7 +2787,7 @@ set_initial_features(void)
*/
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (device_is_compatible(np, "K2-GMAC"))
if (of_device_is_compatible(np, "K2-GMAC"))
g5_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
......@@ -2799,7 +2799,7 @@ set_initial_features(void)
*/
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (device_is_compatible(np, "pci106b,5811")) {
if (of_device_is_compatible(np, "pci106b,5811")) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
g5_fw_enable(np, 0, 1);
}
......@@ -2817,8 +2817,8 @@ set_initial_features(void)
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& device_is_compatible(np, "gmac"))
&& of_device_is_compatible(np->parent, "uni-north")
&& of_device_is_compatible(np, "gmac"))
core99_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
......@@ -2831,10 +2831,10 @@ set_initial_features(void)
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& (device_is_compatible(np, "pci106b,18") ||
device_is_compatible(np, "pci106b,30") ||
device_is_compatible(np, "pci11c1,5811"))) {
&& of_device_is_compatible(np->parent, "uni-north")
&& (of_device_is_compatible(np, "pci106b,18") ||
of_device_is_compatible(np, "pci106b,30") ||
of_device_is_compatible(np, "pci11c1,5811"))) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
core99_firewire_enable(np, 0, 1);
}
......@@ -2845,8 +2845,8 @@ set_initial_features(void)
np = of_find_node_by_name(NULL, "ata-6");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& device_is_compatible(np, "kauai-ata")) {
&& of_device_is_compatible(np->parent, "uni-north")
&& of_device_is_compatible(np, "kauai-ata")) {
core99_ata100_enable(np, 1);
}
np = of_find_node_by_name(np, "ata-6");
......
......@@ -1207,7 +1207,7 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
if (strcmp(np->name, p->name))
continue;
if (p->compatible &&
!device_is_compatible(np, p->compatible))
!of_device_is_compatible(np, p->compatible))
continue;
if (p->quirks & pmac_i2c_quirk_skip)
break;
......
......@@ -553,7 +553,7 @@ static int __init core99_nvram_setup(struct device_node *dp, unsigned long addr)
* identify the chip using flash id commands and base ourselves on
* a list of known chips IDs
*/
if (device_is_compatible(dp, "amd-0137")) {
if (of_device_is_compatible(dp, "amd-0137")) {
core99_erase_bank = amd_erase_bank;
core99_write_bank = amd_write_bank;
} else {
......@@ -588,7 +588,7 @@ int __init pmac_nvram_init(void)
}
}
is_core_99 = device_is_compatible(dp, "nvram,flash");
is_core_99 = of_device_is_compatible(dp, "nvram,flash");
if (is_core_99) {
err = core99_nvram_setup(dp, r1.start);
goto bail;
......
......@@ -934,15 +934,15 @@ static int __init add_bridge(struct device_node *dev)
/* 64 bits only bridges */
#ifdef CONFIG_PPC64
if (device_is_compatible(dev, "u3-agp")) {
if (of_device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (device_is_compatible(dev, "u3-ht")) {
} else if (of_device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
} else if (device_is_compatible(dev, "u4-pcie")) {
} else if (of_device_is_compatible(dev, "u4-pcie")) {
setup_u4_pcie(hose);
disp_name = "U4-PCIE";
primary = 0;
......@@ -953,7 +953,7 @@ static int __init add_bridge(struct device_node *dev)
/* 32 bits only bridges */
#ifdef CONFIG_PPC32
if (device_is_compatible(dev, "uni-north")) {
if (of_device_is_compatible(dev, "uni-north")) {
primary = setup_uninorth(hose, &rsrc);
disp_name = "UniNorth";
} else if (strcmp(dev->name, "pci") == 0) {
......@@ -1129,21 +1129,21 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
return 0;
uninorth_child = node->parent &&
device_is_compatible(node->parent, "uni-north");
of_device_is_compatible(node->parent, "uni-north");
/* Firewire & GMAC were disabled after PCI probe, the driver is
* claiming them, we must re-enable them now.
*/
if (uninorth_child && !strcmp(node->name, "firewire") &&
(device_is_compatible(node, "pci106b,18") ||
device_is_compatible(node, "pci106b,30") ||
device_is_compatible(node, "pci11c1,5811"))) {
(of_device_is_compatible(node, "pci106b,18") ||
of_device_is_compatible(node, "pci106b,30") ||
of_device_is_compatible(node, "pci11c1,5811"))) {
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1);
pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1);
updatecfg = 1;
}
if (uninorth_child && !strcmp(node->name, "ethernet") &&
device_is_compatible(node, "gmac")) {
of_device_is_compatible(node, "gmac")) {
pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1);
updatecfg = 1;
}
......@@ -1203,18 +1203,18 @@ void __init pmac_pcibios_after_init(void)
#endif /* CONFIG_BLK_DEV_IDE */
for_each_node_by_name(nd, "firewire") {
if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
device_is_compatible(nd, "pci106b,30") ||
device_is_compatible(nd, "pci11c1,5811"))
&& device_is_compatible(nd->parent, "uni-north")) {
if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") ||
of_device_is_compatible(nd, "pci106b,30") ||
of_device_is_compatible(nd, "pci11c1,5811"))
&& of_device_is_compatible(nd->parent, "uni-north")) {
pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
}
}
of_node_put(nd);
for_each_node_by_name(nd, "ethernet") {
if (nd->parent && device_is_compatible(nd, "gmac")
&& device_is_compatible(nd->parent, "uni-north"))
if (nd->parent && of_device_is_compatible(nd, "gmac")
&& of_device_is_compatible(nd->parent, "uni-north"))
pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
}
of_node_put(nd);
......
......@@ -364,7 +364,7 @@ static void __init pmac_pic_probe_oldstyle(void)
slave = of_find_node_by_name(master, "mac-io");
/* Check ordering of master & slave */
if (device_is_compatible(master, "gatwick")) {
if (of_device_is_compatible(master, "gatwick")) {
struct device_node *tmp;
BUG_ON(slave == NULL);
tmp = master;
......
......@@ -659,8 +659,8 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
/* We need to use normal PCI probing for the AGP bus,
* since the device for the AGP bridge isn't in the tree.
*/
if (bus->self == NULL && (device_is_compatible(node, "u3-agp") ||
device_is_compatible(node, "u4-pcie")))
if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
of_device_is_compatible(node, "u4-pcie")))
return PCI_PROBE_NORMAL;
return PCI_PROBE_DEVTREE;
}
......
......@@ -562,7 +562,7 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus)
/* Look for the clock chip */
while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
p = of_get_parent(cc);
ok = p && device_is_compatible(p, "uni-n-i2c");
ok = p && of_device_is_compatible(p, "uni-n-i2c");
of_node_put(p);
if (!ok)
continue;
......@@ -575,11 +575,11 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus)
continue;
switch (*reg) {
case 0xd2:
if (device_is_compatible(cc,"pulsar-legacy-slewing")) {
if (of_device_is_compatible(cc,"pulsar-legacy-slewing")) {
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd2;
name = "Pulsar";
} else if (device_is_compatible(cc, "cy28508")) {
} else if (of_device_is_compatible(cc, "cy28508")) {
pmac_tb_freeze = smp_core99_cypress_tb_freeze;
name = "Cypress";
}
......
......@@ -231,13 +231,13 @@ void __init find_udbg_vterm(void)
goto out;
vtermno = termno[0];
if (device_is_compatible(stdout_node, "hvterm1")) {
if (of_device_is_compatible(stdout_node, "hvterm1")) {
udbg_putc = udbg_putcLP;
udbg_getc = udbg_getcLP;
udbg_getc_poll = udbg_getc_pollLP;
if (add_console)
add_preferred_console("hvc", termno[0] & 0xff, NULL);
} else if (device_is_compatible(stdout_node, "hvterm-protocol")) {
} else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) {
vtermno = termno[0];
udbg_putc = udbg_hvsi_putc;
udbg_getc = udbg_hvsi_getc;
......
......@@ -168,7 +168,7 @@ static void __init pseries_mpic_init_IRQ(void)
/* Look for cascade */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
cascade = np;
break;
}
......
......@@ -477,7 +477,7 @@ static int xics_host_match(struct irq_host *h, struct device_node *node)
* like vdevices, events, etc... The trick we use here is to match
* everything here except the legacy 8259 which is compatible "chrp,iic"
*/
return !device_is_compatible(node, "chrp,iic");
return !of_device_is_compatible(node, "chrp,iic");
}
static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
......@@ -618,7 +618,7 @@ static void __init xics_setup_8259_cascade(void)
unsigned long intack = 0;
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
found = np;
break;
}
......
......@@ -221,7 +221,7 @@ static struct uic * __init uic_init_one(struct device_node *node)
const u32 *indexp, *dcrreg;
int len;
BUG_ON(! device_is_compatible(node, "ibm,uic"));
BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
uic = alloc_bootmem(sizeof(*uic));
if (! uic)
......
......@@ -579,7 +579,7 @@ static int hvc_find_vtys(void)
if (!vtermno)
continue;
if (!device_is_compatible(vty, "IBM,iSeries-vty"))
if (!of_device_is_compatible(vty, "IBM,iSeries-vty"))
continue;
if (num_found == 0)
......
......@@ -157,7 +157,7 @@ static int hvc_find_vtys(void)
if (!vtermno)
continue;
if (device_is_compatible(vty, "hvterm1")) {
if (of_device_is_compatible(vty, "hvterm1")) {
hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops);
++num_found;
}
......
......@@ -47,7 +47,7 @@ static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
if (!dn)
return NULL;
if (!device_is_compatible(dn, "AT97SC3201")) {
if (!of_device_is_compatible(dn, "AT97SC3201")) {
of_node_put(dn);
return NULL;
}
......
......@@ -208,14 +208,14 @@ int __init ams_init(void)
#ifdef CONFIG_SENSORS_AMS_I2C
np = of_find_node_by_name(NULL, "accelerometer");
if (np && device_is_compatible(np, "AAPL,accelerometer_1"))
if (np && of_device_is_compatible(np, "AAPL,accelerometer_1"))
/* Found I2C motion sensor */
return ams_i2c_init(np);
#endif
#ifdef CONFIG_SENSORS_AMS_PMU
np = of_find_node_by_name(NULL, "sms");
if (np && device_is_compatible(np, "sms"))
if (np && of_device_is_compatible(np, "sms"))
/* Found PMU motion sensor */
return ams_pmu_init(np);
#endif
......
......@@ -398,7 +398,7 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev)
unsigned int class_rev = 0;
u8 conf;
if (np == NULL || !device_is_compatible(np, "kiwi-root"))
if (np == NULL || !of_device_is_compatible(np, "kiwi-root"))
return;
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
......
......@@ -1157,18 +1157,18 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
if (device_is_compatible(np, "shasta-ata"))
if (of_device_is_compatible(np, "shasta-ata"))
pmif->kind = controller_sh_ata6;
else if (device_is_compatible(np, "kauai-ata"))
else if (of_device_is_compatible(np, "kauai-ata"))
pmif->kind = controller_un_ata6;
else if (device_is_compatible(np, "K2-UATA"))
else if (of_device_is_compatible(np, "K2-UATA"))
pmif->kind = controller_k2_ata6;
else if (device_is_compatible(np, "keylargo-ata")) {
else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0)
pmif->kind = controller_kl_ata4;
else
pmif->kind = controller_kl_ata3;
} else if (device_is_compatible(np, "heathrow-ata"))
} else if (of_device_is_compatible(np, "heathrow-ata"))
pmif->kind = controller_heathrow;
else {
pmif->kind = controller_ohare;
......@@ -1190,8 +1190,8 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
* they have a 80 conductor cable, this seem to be always the case unless
* the user mucked around
*/
if (device_is_compatible(np, "K2-UATA") ||
device_is_compatible(np, "shasta-ata"))
if (of_device_is_compatible(np, "K2-UATA") ||
of_device_is_compatible(np, "shasta-ata"))
pmif->cable_80 = 1;
/* On Kauai-type controllers, we make sure the FCR is correct */
......
......@@ -606,7 +606,7 @@ static void smu_expose_childs(struct work_struct *unused)
struct device_node *np;
for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;)
if (device_is_compatible(np, "smu-sensors"))
if (of_device_is_compatible(np, "smu-sensors"))
of_platform_device_create(np, "smu-sensors",
&smu->of_dev->dev);
}
......
......@@ -560,9 +560,9 @@ thermostat_init(void)
np = of_find_node_by_name(NULL, "fan");
if (!np)
return -ENODEV;
if (device_is_compatible(np, "adt7460"))
if (of_device_is_compatible(np, "adt7460"))
therm_type = ADT7460;
else if (device_is_compatible(np, "adt7467"))
else if (of_device_is_compatible(np, "adt7467"))
therm_type = ADT7467;
else
return -ENODEV;
......
......@@ -310,14 +310,14 @@ int __init find_via_pmu(void)
PMU_INT_TICK;
if (vias->parent->name && ((strcmp(vias->parent->name, "ohare") == 0)
|| device_is_compatible(vias->parent, "ohare")))
|| of_device_is_compatible(vias->parent, "ohare")))
pmu_kind = PMU_OHARE_BASED;
else if (device_is_compatible(vias->parent, "paddington"))
else if (of_device_is_compatible(vias->parent, "paddington"))
pmu_kind = PMU_PADDINGTON_BASED;
else if (device_is_compatible(vias->parent, "heathrow"))
else if (of_device_is_compatible(vias->parent, "heathrow"))
pmu_kind = PMU_HEATHROW_BASED;
else if (device_is_compatible(vias->parent, "Keylargo")
|| device_is_compatible(vias->parent, "K2-Keylargo")) {
else if (of_device_is_compatible(vias->parent, "Keylargo")
|| of_device_is_compatible(vias->parent, "K2-Keylargo")) {
struct device_node *gpiop;
struct device_node *adbp;
u64 gaddr = OF_BAD_ADDR;
......
......@@ -188,10 +188,10 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
if (loc == NULL || addr == 0)
continue;
/* real lm75 */
if (device_is_compatible(dev, "lm75"))
if (of_device_is_compatible(dev, "lm75"))
wf_lm75_create(adapter, addr, 0, loc);
/* ds1775 (compatible, better resolution */
else if (device_is_compatible(dev, "ds1775"))
else if (of_device_is_compatible(dev, "ds1775"))
wf_lm75_create(adapter, addr, 1, loc);
}
return 0;
......
......@@ -131,7 +131,7 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
*/
if (!pmac_i2c_match_adapter(dev, adapter))
continue;
if (!device_is_compatible(dev, "max6690"))
if (!of_device_is_compatible(dev, "max6690"))
continue;
addr = pmac_i2c_get_dev_addr(dev);
loc = of_get_property(dev, "hwsensor-location", NULL);
......
......@@ -263,7 +263,7 @@ static int __init smu_controls_init(void)
/* Look for RPM fans */
for (fans = NULL; (fans = of_get_next_child(smu, fans)) != NULL;)
if (!strcmp(fans->name, "rpm-fans") ||
device_is_compatible(fans, "smu-rpm-fans"))
of_device_is_compatible(fans, "smu-rpm-fans"))
break;
for (fan = NULL;
fans && (fan = of_get_next_child(fans, fan)) != NULL;) {
......
......@@ -380,7 +380,7 @@ static int wf_sat_attach(struct i2c_adapter *adapter)
busnode = pmac_i2c_get_bus_node(bus);
while ((dev = of_get_next_child(busnode, dev)) != NULL)
if (device_is_compatible(dev, "smu-sat"))
if (of_device_is_compatible(dev, "smu-sat"))
wf_sat_create(adapter, dev);
return 0;
}
......
......@@ -1450,7 +1450,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
/*
* Detect port type
*/
if (device_is_compatible(np, "cobalt"))
if (of_device_is_compatible(np, "cobalt"))
uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
conn = of_get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
......
......@@ -97,8 +97,8 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
return -ENODEV;
is_bigendian =
device_is_compatible(dn, "ohci-bigendian") ||
device_is_compatible(dn, "ohci-be");
of_device_is_compatible(dn, "ohci-bigendian") ||
of_device_is_compatible(dn, "ohci-be");
dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
......
......@@ -322,8 +322,8 @@ static void __init offb_init_fb(const char *name, const char *full_name,
ioremap(base + 0x7ff000, 0x1000) + 0xcc0;
par->cmap_data = par->cmap_adr + 1;
par->cmap_type = cmap_m64;
} else if (dp && (device_is_compatible(dp, "pci1014,b7") ||
device_is_compatible(dp, "pci1014,21c"))) {
} else if (dp && (of_device_is_compatible(dp, "pci1014,b7") ||
of_device_is_compatible(dp, "pci1014,21c"))) {
par->cmap_adr = offb_map_reg(dp, 0, 0x6000, 0x1000);
if (par->cmap_adr)
par->cmap_type = cmap_gxt2000;
......
......@@ -1061,7 +1061,7 @@ static int onyx_i2c_attach(struct i2c_adapter *adapter)
busnode = pmac_i2c_get_bus_node(bus);
while ((dev = of_get_next_child(busnode, dev)) != NULL) {
if (device_is_compatible(dev, "pcm3052")) {
if (of_device_is_compatible(dev, "pcm3052")) {
const u32 *addr;
printk(KERN_DEBUG PFX "found pcm3052\n");
addr = of_get_property(dev, "reg", NULL);
......@@ -1074,7 +1074,7 @@ static int onyx_i2c_attach(struct i2c_adapter *adapter)
/* if that didn't work, try desperate mode for older
* machines that have stuff missing from the device tree */
if (!device_is_compatible(busnode, "k2-i2c"))
if (!of_device_is_compatible(busnode, "k2-i2c"))
return -ENODEV;
printk(KERN_DEBUG PFX "found k2-i2c, checking if onyx chip is on it\n");
......
......@@ -938,7 +938,7 @@ static int tas_i2c_attach(struct i2c_adapter *adapter)
busnode = pmac_i2c_get_bus_node(bus);
while ((dev = of_get_next_child(busnode, dev)) != NULL) {
if (device_is_compatible(dev, "tas3004")) {
if (of_device_is_compatible(dev, "tas3004")) {
const u32 *addr;
printk(KERN_DEBUG PFX "found tas3004\n");
addr = of_get_property(dev, "reg", NULL);
......
......@@ -336,8 +336,8 @@ static int i2sbus_probe(struct macio_dev* dev, const struct of_device_id *match)
}
while ((np = of_get_next_child(dev->ofdev.node, np))) {
if (device_is_compatible(np, "i2sbus") ||
device_is_compatible(np, "i2s-modem")) {
if (of_device_is_compatible(np, "i2sbus") ||
of_device_is_compatible(np, "i2s-modem")) {
got += i2sbus_add_dev(dev, control, np);
}
}
......
......@@ -362,7 +362,7 @@ setup_audio_gpio(const char *name, const char* compatible, int *gpio_addr, int*
of_get_property(np,"audio-gpio",NULL);
if (property != 0 && strcmp(property,name) == 0)
break;
} else if (compatible && device_is_compatible(np, compatible))
} else if (compatible && of_device_is_compatible(np, compatible))
break;
np = of_get_next_child(gpiop, np);
}
......@@ -2620,17 +2620,17 @@ get_codec_type(struct device_node *info)
if (info) {
/* must do awacs first to allow screamer to overide it */
if (device_is_compatible(info, "awacs"))
if (of_device_is_compatible(info, "awacs"))
codec = AWACS_AWACS ;
if (device_is_compatible(info, "screamer"))
if (of_device_is_compatible(info, "screamer"))
codec = AWACS_SCREAMER;
if (device_is_compatible(info, "burgundy"))
if (of_device_is_compatible(info, "burgundy"))
codec = AWACS_BURGUNDY ;
if (device_is_compatible(info, "daca"))
if (of_device_is_compatible(info, "daca"))
codec = AWACS_DACA;
if (device_is_compatible(info, "tumbler"))
if (of_device_is_compatible(info, "tumbler"))
codec = AWACS_TUMBLER;
if (device_is_compatible(info, "snapper"))
if (of_device_is_compatible(info, "snapper"))
codec = AWACS_SNAPPER;
}
return codec ;
......@@ -2772,7 +2772,7 @@ set_hw_byteswap(struct device_node *io)
for (mio = io->parent; mio ; mio = mio->parent) {
if (strcmp(mio->name, "mac-io") == 0) {
if (device_is_compatible(mio, "Keylargo"))
if (of_device_is_compatible(mio, "Keylargo"))
kl = 1;
break;
}
......
......@@ -843,7 +843,7 @@ static void __init detect_byte_swap(struct snd_pmac *chip)
/* if seems that Keylargo can't byte-swap */
for (mio = chip->node->parent; mio; mio = mio->parent) {
if (strcmp(mio->name, "mac-io") == 0) {
if (device_is_compatible(mio, "Keylargo"))
if (of_device_is_compatible(mio, "Keylargo"))
chip->can_byte_swap = 0;
break;
}
......@@ -910,7 +910,7 @@ static int __init snd_pmac_detect(struct snd_pmac *chip)
chip->node = of_find_node_by_name(NULL, "i2s-a");
if (chip->node && chip->node->parent &&
chip->node->parent->parent) {
if (device_is_compatible(chip->node->parent->parent,
if (of_device_is_compatible(chip->node->parent->parent,
"K2-Keylargo"))
chip->is_k2 = 1;
}
......@@ -941,22 +941,22 @@ static int __init snd_pmac_detect(struct snd_pmac *chip)
return -ENODEV;
}
/* This should be verified on older screamers */
if (device_is_compatible(sound, "screamer")) {
if (of_device_is_compatible(sound, "screamer")) {
chip->model = PMAC_SCREAMER;
// chip->can_byte_swap = 0; /* FIXME: check this */
}
if (device_is_compatible(sound, "burgundy")) {
if (of_device_is_compatible(sound, "burgundy")) {
chip->model = PMAC_BURGUNDY;
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
}
if (device_is_compatible(sound, "daca")) {
if (of_device_is_compatible(sound, "daca")) {
chip->model = PMAC_DACA;
chip->can_capture = 0; /* no capture */
chip->can_duplex = 0;
// chip->can_byte_swap = 0; /* FIXME: check this */
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
}
if (device_is_compatible(sound, "tumbler")) {
if (of_device_is_compatible(sound, "tumbler")) {
chip->model = PMAC_TUMBLER;
chip->can_capture = 0; /* no capture */
chip->can_duplex = 0;
......@@ -965,7 +965,7 @@ static int __init snd_pmac_detect(struct snd_pmac *chip)
chip->freq_table = tumbler_freqs;
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
}
if (device_is_compatible(sound, "snapper")) {
if (of_device_is_compatible(sound, "snapper")) {
chip->model = PMAC_SNAPPER;
// chip->can_byte_swap = 0; /* FIXME: check this */
chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
......
......@@ -1060,7 +1060,7 @@ static struct device_node *find_compatible_audio_device(const char *name)
for (np = of_get_next_child(gpiop, NULL); np;
np = of_get_next_child(gpiop, np)) {
if (device_is_compatible(np, name))
if (of_device_is_compatible(np, name))
break;
}
of_node_put(gpiop);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册