提交 519c6013 编写于 作者: R Roger Quadros 提交者: Felipe Balbi

usb: phy: omap-usb3: Improve DPLL parameter lookup code

Use a mapping table (dpll_map) to match the possible system clock rates
to the appropriate DPLL parameters.

Introduce a function "omap_usb3_get_dpll_params()" that will
return the matching DPLL parameters for the given clock rate.

Also, bail out on phy init if DPLL locking fails.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 88650d62
......@@ -27,7 +27,6 @@
#include <linux/delay.h>
#include <linux/usb/omap_control_usb.h>
#define NUM_SYS_CLKS 6
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
#define PLL_CONFIGURATION1 0x0000000C
......@@ -57,26 +56,32 @@
*/
# define PLL_IDLE_TIME 100;
enum sys_clk_rate {
CLK_RATE_UNDEFINED = -1,
CLK_RATE_12MHZ,
CLK_RATE_16MHZ,
CLK_RATE_19MHZ,
CLK_RATE_20MHZ,
CLK_RATE_26MHZ,
CLK_RATE_38MHZ
struct usb_dpll_map {
unsigned long rate;
struct usb_dpll_params params;
};
static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = {
{1250, 5, 4, 20, 0}, /* 12 MHz */
{3125, 20, 4, 20, 0}, /* 16.8 MHz */
{1172, 8, 4, 20, 65537}, /* 19.2 MHz */
{1000, 7, 4, 10, 0}, /* 20 MHz */
{1250, 12, 4, 20, 0}, /* 26 MHz */
{3125, 47, 4, 20, 92843}, /* 38.4 MHz */
static struct usb_dpll_map dpll_map[] = {
{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
};
static struct usb_dpll_params *omap_usb3_get_dpll_params(unsigned long rate)
{
int i;
for (i = 0; i < ARRAY_SIZE(dpll_map); i++) {
if (rate == dpll_map[i].rate)
return &dpll_map[i].params;
}
return 0;
}
static int omap_usb3_suspend(struct usb_phy *x, int suspend)
{
struct omap_usb *phy = phy_to_omapusb(x);
......@@ -116,26 +121,6 @@ static int omap_usb3_suspend(struct usb_phy *x, int suspend)
return 0;
}
static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate)
{
switch (rate) {
case 12000000:
return CLK_RATE_12MHZ;
case 16800000:
return CLK_RATE_16MHZ;
case 19200000:
return CLK_RATE_19MHZ;
case 20000000:
return CLK_RATE_20MHZ;
case 26000000:
return CLK_RATE_26MHZ;
case 38400000:
return CLK_RATE_38MHZ;
default:
return CLK_RATE_UNDEFINED;
}
}
static void omap_usb_dpll_relock(struct omap_usb *phy)
{
u32 val;
......@@ -155,39 +140,39 @@ static int omap_usb_dpll_lock(struct omap_usb *phy)
{
u32 val;
unsigned long rate;
enum sys_clk_rate clk_index;
rate = clk_get_rate(phy->sys_clk);
clk_index = __get_sys_clk_index(rate);
struct usb_dpll_params *dpll_params;
if (clk_index == CLK_RATE_UNDEFINED) {
pr_err("dpll cannot be locked for sys clk freq:%luHz\n", rate);
rate = clk_get_rate(phy->sys_clk);
dpll_params = omap_usb3_get_dpll_params(rate);
if (!dpll_params) {
dev_err(phy->dev,
"No DPLL configuration for %lu Hz SYS CLK\n", rate);
return -EINVAL;
}
val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGN_MASK;
val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT;
val |= dpll_params->n << PLL_REGN_SHIFT;
omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
val &= ~PLL_SELFREQDCO_MASK;
val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT;
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGM_MASK;
val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT;
val |= dpll_params->m << PLL_REGM_SHIFT;
omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
val &= ~PLL_REGM_F_MASK;
val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT;
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
val &= ~PLL_SD_MASK;
val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT;
val |= dpll_params->sd << PLL_SD_SHIFT;
omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
omap_usb_dpll_relock(phy);
......@@ -198,8 +183,12 @@ static int omap_usb_dpll_lock(struct omap_usb *phy)
static int omap_usb3_init(struct usb_phy *x)
{
struct omap_usb *phy = phy_to_omapusb(x);
int ret;
ret = omap_usb_dpll_lock(phy);
if (ret)
return ret;
omap_usb_dpll_lock(phy);
omap_control_usb3_phy_power(phy->control_dev, 1);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册