提交 4b6ece97 编写于 作者: J Jaswinder Singh Rajput

3C359: use request_firmware

Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
上级 a7a5eb9d
......@@ -62,6 +62,7 @@
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <linux/firmware.h>
#include <net/checksum.h>
......@@ -73,8 +74,10 @@
static char version[] __devinitdata =
"3c359.c v1.2.0 2/17/01 - Mike Phillips (mikep@linuxtr.net)" ;
#define FW_NAME "3com/3C359.bin"
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
MODULE_FIRMWARE(FW_NAME);
/* Module paramters */
......@@ -114,8 +117,6 @@ MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ;
* will be stuck with 1555 lines of hex #'s in the code.
*/
#include "3c359_microcode.h"
static struct pci_device_id xl_pci_tbl[] =
{
{PCI_VENDOR_ID_3COM,PCI_DEVICE_ID_3COM_3C359, PCI_ANY_ID, PCI_ANY_ID, },
......@@ -364,10 +365,30 @@ static int __devinit xl_probe(struct pci_dev *pdev,
return 0;
}
static int xl_init_firmware(struct xl_private *xl_priv)
{
int err;
err = request_firmware(&xl_priv->fw, FW_NAME, &xl_priv->pdev->dev);
if (err) {
printk(KERN_ERR "Failed to load firmware \"%s\"\n", FW_NAME);
return err;
}
if (xl_priv->fw->size < 16) {
printk(KERN_ERR "Bogus length %zu in \"%s\"\n",
xl_priv->fw->size, FW_NAME);
release_firmware(xl_priv->fw);
err = -EINVAL;
}
return err;
}
static int __devinit xl_init(struct net_device *dev)
{
struct xl_private *xl_priv = netdev_priv(dev);
int err;
printk(KERN_INFO "%s \n", version);
printk(KERN_INFO "%s: I/O at %hx, MMIO at %p, using irq %d\n",
......@@ -375,8 +396,11 @@ static int __devinit xl_init(struct net_device *dev)
spin_lock_init(&xl_priv->xl_lock) ;
return xl_hw_reset(dev) ;
err = xl_init_firmware(xl_priv);
if (err == 0)
err = xl_hw_reset(dev);
return err;
}
......@@ -386,7 +410,7 @@ static int __devinit xl_init(struct net_device *dev)
*/
static int xl_hw_reset(struct net_device *dev)
{
{
struct xl_private *xl_priv = netdev_priv(dev);
u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
unsigned long t ;
......@@ -396,6 +420,9 @@ static int xl_hw_reset(struct net_device *dev)
u16 start ;
int j ;
if (xl_priv->fw == NULL)
return -EINVAL;
/*
* Reset the card. If the card has got the microcode on board, we have
* missed the initialization interrupt, so we must always do this.
......@@ -458,25 +485,30 @@ static int xl_hw_reset(struct net_device *dev)
/*
* Now to write the microcode into the shared ram
* The microcode must finish at position 0xFFFF, so we must subtract
* to get the start position for the code
* The microcode must finish at position 0xFFFF,
* so we must subtract to get the start position for the code
*
* Looks strange but ensures compiler only uses
* 16 bit unsigned int
*/
start = (0xFFFF - (xl_priv->fw->size) + 1) ;
start = (0xFFFF - (mc_size) + 1 ) ; /* Looks strange but ensures compiler only uses 16 bit unsigned int for this */
printk(KERN_INFO "3C359: Uploading Microcode: ");
for (i = start, j = 0; j < mc_size; i++, j++) {
writel(MEM_BYTE_WRITE | 0XD0000 | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
writeb(microcode[j],xl_mmio + MMIO_MACDATA) ;
for (i = start, j = 0; j < xl_priv->fw->size; i++, j++) {
writel(MEM_BYTE_WRITE | 0XD0000 | i,
xl_mmio + MMIO_MAC_ACCESS_CMD);
writeb(xl_priv->fw->data[j], xl_mmio + MMIO_MACDATA);
if (j % 1024 == 0)
printk(".");
}
printk("\n") ;
for (i=0;i < 16; i++) {
writel( (MEM_BYTE_WRITE | 0xDFFF0) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
writeb(microcode[mc_size - 16 + i], xl_mmio + MMIO_MACDATA) ;
for (i = 0; i < 16; i++) {
writel((MEM_BYTE_WRITE | 0xDFFF0) + i,
xl_mmio + MMIO_MAC_ACCESS_CMD);
writeb(xl_priv->fw->data[xl_priv->fw->size - 16 + i],
xl_mmio + MMIO_MACDATA);
}
/*
......@@ -1782,6 +1814,7 @@ static void __devexit xl_remove_one (struct pci_dev *pdev)
struct net_device *dev = pci_get_drvdata(pdev);
struct xl_private *xl_priv=netdev_priv(dev);
release_firmware(xl_priv->fw);
unregister_netdev(dev);
iounmap(xl_priv->xl_mmio) ;
pci_release_regions(pdev) ;
......
......@@ -284,5 +284,8 @@ struct xl_private {
u8 xl_laa[6] ;
u32 rx_ring_dma_addr ;
u32 tx_ring_dma_addr ;
/* firmware section */
const struct firmware *fw;
};
此差异已折叠。
此差异已折叠。
......@@ -26,6 +26,7 @@ fw-shipped- += acenic/tg1.bin
else
acenic-objs := acenic/tg1.bin acenic/tg2.bin
endif
fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
adaptec/starfire_tx.bin
......
......@@ -505,3 +505,29 @@ Licence:
Found in hex form in kernel source.
--------------------------------------------------------------------------
Driver: 3C359 - 3Com 3C359 Token Link Velocity XL adapter
File: 3com/3C359.bin
Licence:
/*
* The firmware this driver downloads into the tokenring card is a
* separate program and is not GPL'd source code, even though the Linux
* side driver and the routine that loads this data into the card are.
*
* This firmware is licensed to you strictly for use in conjunction
* with the use of 3Com 3C359 TokenRing adapters. There is no
* waranty expressed or implied about its fitness for any purpose.
*/
/* 3c359_microcode.mac: 3Com 3C359 Tokenring microcode.
*
* Notes:
* - Loaded from xl_init upon adapter initialization.
*
* Available from 3Com as part of their standard 3C359 driver.
*/
Found in hex form in kernel source.
--------------------------------------------------------------------------
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册