提交 431861cf 编写于 作者: N Nicolas Ferre 提交者: Linus Torvalds

atmel_lcdfb: new alternate pixel clock formula

at91sam9g45 non ES lots have an alternate pixel clock calculation formula.
Introduce this one with condition on the cpu_is_xxxxx() macros.

Newer 9g45 SOC will not have good pixel clock calculation without this
fix.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 7779d7be
......@@ -484,6 +484,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
unsigned long value;
unsigned long clk_value_khz;
unsigned long bits_per_line;
unsigned long pix_factor = 2;
might_sleep();
......@@ -516,20 +517,24 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
/* Now, the LCDC core... */
/* Set pixel clock */
if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es())
pix_factor = 1;
clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
if (value < 2) {
if (value < pix_factor) {
dev_notice(info->device, "Bypassing pixel clock divider\n");
lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
} else {
value = (value / 2) - 1;
value = (value / pix_factor) - 1;
dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n",
value);
lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
value << ATMEL_LCDC_CLKVAL_OFFSET);
info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
info->var.pixclock =
KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1)));
dev_dbg(info->device, " updated pixclk: %lu KHz\n",
PICOS2KHZ(info->var.pixclock));
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册