提交 43115f58 编写于 作者: K Keita Maehara 提交者: Jaroslav Kysela

[ALSA] ac97: YMF743 missing controls support (2/2)

These patches enable a few YMF743 controls (Tone/3D/IEC958) that won't
be detected with the current version of ALSA.
The second one contains following changes:
- A chip-specific SPDIF support for YMF743 (It doesn't have AC97
 standard SPDIF registers seen on YMF753).
- The implementation for 'IEC958 Playback Source' and 'IEC958 Mute'
 are identical to the ones for YMF753. But there is no 'IEC958 Output
 Pin' for YMF743.
Signed-off-by: NKeita Maehara <maehara@debian.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
上级 13043984
...@@ -176,7 +176,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = { ...@@ -176,7 +176,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = {
{ 0x574d4C09, 0xffffffff, "WM9709", NULL, NULL}, { 0x574d4C09, 0xffffffff, "WM9709", NULL, NULL},
{ 0x574d4C12, 0xffffffff, "WM9711,WM9712", patch_wolfson11, NULL}, { 0x574d4C12, 0xffffffff, "WM9711,WM9712", patch_wolfson11, NULL},
{ 0x574d4c13, 0xffffffff, "WM9713,WM9714", patch_wolfson13, NULL, AC97_DEFAULT_POWER_OFF}, { 0x574d4c13, 0xffffffff, "WM9713,WM9714", patch_wolfson13, NULL, AC97_DEFAULT_POWER_OFF},
{ 0x594d4800, 0xffffffff, "YMF743", NULL, NULL }, { 0x594d4800, 0xffffffff, "YMF743", patch_yamaha_ymf743, NULL },
{ 0x594d4802, 0xffffffff, "YMF752", NULL, NULL }, { 0x594d4802, 0xffffffff, "YMF752", NULL, NULL },
{ 0x594d4803, 0xffffffff, "YMF753", patch_yamaha_ymf753, NULL }, { 0x594d4803, 0xffffffff, "YMF753", patch_yamaha_ymf753, NULL },
{ 0x83847600, 0xffffffff, "STAC9700,83,84", patch_sigmatel_stac9700, NULL }, { 0x83847600, 0xffffffff, "STAC9700,83,84", patch_sigmatel_stac9700, NULL },
...@@ -779,6 +779,12 @@ static int snd_ac97_spdif_default_put(struct snd_kcontrol *kcontrol, struct snd_ ...@@ -779,6 +779,12 @@ static int snd_ac97_spdif_default_put(struct snd_kcontrol *kcontrol, struct snd_
change |= snd_ac97_update_bits_nolock(ac97, AC97_CXR_AUDIO_MISC, change |= snd_ac97_update_bits_nolock(ac97, AC97_CXR_AUDIO_MISC,
AC97_CXR_SPDIF_MASK | AC97_CXR_COPYRGT, AC97_CXR_SPDIF_MASK | AC97_CXR_COPYRGT,
v); v);
} else if (ac97->id == AC97_ID_YMF743) {
change |= snd_ac97_update_bits_nolock(ac97,
AC97_YMF7X3_DIT_CTRL,
0xff38,
((val << 4) & 0xff00) |
((val << 2) & 0x0038));
} else { } else {
unsigned short extst = snd_ac97_read_cache(ac97, AC97_EXTENDED_STATUS); unsigned short extst = snd_ac97_read_cache(ac97, AC97_EXTENDED_STATUS);
snd_ac97_update_bits_nolock(ac97, AC97_EXTENDED_STATUS, AC97_EA_SPDIF, 0); /* turn off */ snd_ac97_update_bits_nolock(ac97, AC97_EXTENDED_STATUS, AC97_EA_SPDIF, 0); /* turn off */
...@@ -1375,7 +1381,8 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97) ...@@ -1375,7 +1381,8 @@ static int snd_ac97_mixer_build(struct snd_ac97 * ac97)
for (idx = 0; idx < 2; idx++) { for (idx = 0; idx < 2; idx++) {
if ((err = snd_ctl_add(card, kctl = snd_ac97_cnew(&snd_ac97_controls_tone[idx], ac97))) < 0) if ((err = snd_ctl_add(card, kctl = snd_ac97_cnew(&snd_ac97_controls_tone[idx], ac97))) < 0)
return err; return err;
if (ac97->id == AC97_ID_YMF753) { if (ac97->id == AC97_ID_YMF743 ||
ac97->id == AC97_ID_YMF753) {
kctl->private_value &= ~(0xff << 16); kctl->private_value &= ~(0xff << 16);
kctl->private_value |= 7 << 16; kctl->private_value |= 7 << 16;
} }
......
...@@ -54,6 +54,7 @@ ...@@ -54,6 +54,7 @@
#define AC97_ID_ALC658 0x414c4780 #define AC97_ID_ALC658 0x414c4780
#define AC97_ID_ALC658D 0x414c4781 #define AC97_ID_ALC658D 0x414c4781
#define AC97_ID_ALC850 0x414c4790 #define AC97_ID_ALC850 0x414c4790
#define AC97_ID_YMF743 0x594d4800
#define AC97_ID_YMF753 0x594d4803 #define AC97_ID_YMF753 0x594d4803
#define AC97_ID_VT1616 0x49434551 #define AC97_ID_VT1616 0x49434551
#define AC97_ID_CM9738 0x434d4941 #define AC97_ID_CM9738 0x434d4941
......
...@@ -204,6 +204,7 @@ static inline int is_shared_micin(struct snd_ac97 *ac97) ...@@ -204,6 +204,7 @@ static inline int is_shared_micin(struct snd_ac97 *ac97)
/* The following snd_ac97_ymf753_... items added by David Shust (dshust@shustring.com) */ /* The following snd_ac97_ymf753_... items added by David Shust (dshust@shustring.com) */
/* Modified for YMF743 by Keita Maehara <maehara@debian.org> */
/* It is possible to indicate to the Yamaha YMF7x3 the type of /* It is possible to indicate to the Yamaha YMF7x3 the type of
speakers being used. */ speakers being used. */
...@@ -298,6 +299,74 @@ static int snd_ac97_ymf7x3_spdif_source_put(struct snd_kcontrol *kcontrol, ...@@ -298,6 +299,74 @@ static int snd_ac97_ymf7x3_spdif_source_put(struct snd_kcontrol *kcontrol,
return snd_ac97_update_bits(ac97, AC97_YMF7X3_DIT_CTRL, 0x0002, val); return snd_ac97_update_bits(ac97, AC97_YMF7X3_DIT_CTRL, 0x0002, val);
} }
static int patch_yamaha_ymf7x3_3d(struct snd_ac97 *ac97)
{
struct snd_kcontrol *kctl;
int err;
kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97);
err = snd_ctl_add(ac97->bus->card, kctl);
if (err < 0)
return err;
strcpy(kctl->id.name, "3D Control - Wide");
kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 9, 7, 0);
snd_ac97_write_cache(ac97, AC97_3D_CONTROL, 0x0000);
err = snd_ctl_add(ac97->bus->card,
snd_ac97_cnew(&snd_ac97_ymf7x3_controls_speaker,
ac97));
if (err < 0)
return err;
snd_ac97_write_cache(ac97, AC97_YMF7X3_3D_MODE_SEL, 0x0c00);
return 0;
}
static const struct snd_kcontrol_new snd_ac97_yamaha_ymf743_controls_spdif[3] =
{
AC97_SINGLE(SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
AC97_YMF7X3_DIT_CTRL, 0, 1, 0),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, NONE) "Source",
.info = snd_ac97_ymf7x3_spdif_source_info,
.get = snd_ac97_ymf7x3_spdif_source_get,
.put = snd_ac97_ymf7x3_spdif_source_put,
},
AC97_SINGLE(SNDRV_CTL_NAME_IEC958("", NONE, NONE) "Mute",
AC97_YMF7X3_DIT_CTRL, 2, 1, 1)
};
static int patch_yamaha_ymf743_build_spdif(struct snd_ac97 *ac97)
{
int err;
err = patch_build_controls(ac97, &snd_ac97_controls_spdif[0], 3);
if (err < 0)
return err;
err = patch_build_controls(ac97,
snd_ac97_yamaha_ymf743_controls_spdif, 3);
if (err < 0)
return err;
/* set default PCM S/PDIF params */
/* PCM audio,no copyright,no preemphasis,PCM coder,original */
snd_ac97_write_cache(ac97, AC97_YMF7X3_DIT_CTRL, 0xa201);
return 0;
}
static struct snd_ac97_build_ops patch_yamaha_ymf743_ops = {
.build_spdif = patch_yamaha_ymf743_build_spdif,
.build_3d = patch_yamaha_ymf7x3_3d,
};
static int patch_yamaha_ymf743(struct snd_ac97 *ac97)
{
ac97->build_ops = &patch_yamaha_ymf743_ops;
ac97->caps |= AC97_BC_BASS_TREBLE;
ac97->caps |= 0x04 << 10; /* Yamaha 3D enhancement */
ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_48000; /* 48k only */
ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */
return 0;
}
/* The AC'97 spec states that the S/PDIF signal is to be output at pin 48. /* The AC'97 spec states that the S/PDIF signal is to be output at pin 48.
The YMF753 will output the S/PDIF signal to pin 43, 47 (EAPD), or 48. The YMF753 will output the S/PDIF signal to pin 43, 47 (EAPD), or 48.
By default, no output pin is selected, and the S/PDIF signal is not output. By default, no output pin is selected, and the S/PDIF signal is not output.
...@@ -358,28 +427,6 @@ static const struct snd_kcontrol_new snd_ac97_ymf753_controls_spdif[3] = { ...@@ -358,28 +427,6 @@ static const struct snd_kcontrol_new snd_ac97_ymf753_controls_spdif[3] = {
AC97_YMF7X3_DIT_CTRL, 2, 1, 1) AC97_YMF7X3_DIT_CTRL, 2, 1, 1)
}; };
static int patch_yamaha_ymf7x3_3d(struct snd_ac97 *ac97)
{
struct snd_kcontrol *kctl;
int err;
kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97);
err = snd_ctl_add(ac97->bus->card, kctl);
if (err < 0)
return err;
strcpy(kctl->id.name, "3D Control - Wide");
kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 9, 7, 0);
snd_ac97_write_cache(ac97, AC97_3D_CONTROL, 0x0000);
err = snd_ctl_add(ac97->bus->card,
snd_ac97_cnew(&snd_ac97_ymf7x3_controls_speaker,
ac97));
if (err < 0)
return err;
snd_ac97_write_cache(ac97, AC97_YMF7X3_3D_MODE_SEL, 0x0c00);
return 0;
}
static int patch_yamaha_ymf753_post_spdif(struct snd_ac97 * ac97) static int patch_yamaha_ymf753_post_spdif(struct snd_ac97 * ac97)
{ {
int err; int err;
......
...@@ -236,10 +236,14 @@ static void snd_ac97_proc_read_main(struct snd_ac97 *ac97, struct snd_info_buffe ...@@ -236,10 +236,14 @@ static void snd_ac97_proc_read_main(struct snd_ac97 *ac97, struct snd_info_buffe
val = snd_ac97_read(ac97, AC97_PCM_MIC_ADC_RATE); val = snd_ac97_read(ac97, AC97_PCM_MIC_ADC_RATE);
snd_iprintf(buffer, "PCM MIC ADC : %iHz\n", val); snd_iprintf(buffer, "PCM MIC ADC : %iHz\n", val);
} }
if ((ext & AC97_EI_SPDIF) || (ac97->flags & AC97_CS_SPDIF)) { if ((ext & AC97_EI_SPDIF) || (ac97->flags & AC97_CS_SPDIF) ||
(ac97->id == AC97_ID_YMF743)) {
if (ac97->flags & AC97_CS_SPDIF) if (ac97->flags & AC97_CS_SPDIF)
val = snd_ac97_read(ac97, AC97_CSR_SPDIF); val = snd_ac97_read(ac97, AC97_CSR_SPDIF);
else else if (ac97->id == AC97_ID_YMF743) {
val = snd_ac97_read(ac97, AC97_YMF7X3_DIT_CTRL);
val = 0x2000 | (val & 0xff00) >> 4 | (val & 0x38) >> 2;
} else
val = snd_ac97_read(ac97, AC97_SPDIF); val = snd_ac97_read(ac97, AC97_SPDIF);
snd_iprintf(buffer, "SPDIF Control :%s%s%s%s Category=0x%x Generation=%i%s%s%s\n", snd_iprintf(buffer, "SPDIF Control :%s%s%s%s Category=0x%x Generation=%i%s%s%s\n",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册