提交 33ac02aa 编写于 作者: L Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq

/*
* (c) 2003, 2004 Advanced Micro Devices, Inc.
* (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
......@@ -44,7 +44,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
#define VERSION "version 1.40.2"
#define VERSION "version 1.50.3"
#include "powernow-k8.h"
/* serialize freq changes */
......@@ -231,7 +231,7 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
/*
* Reduce the vid by the max of step or reqvid.
* Decreasing vid codes represent increasing voltages:
* vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off.
* vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
*/
static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
{
......@@ -466,7 +466,7 @@ static int check_supported_cpu(unsigned int cpu)
eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) {
((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) {
printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
goto out;
}
......@@ -695,6 +695,7 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned
data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
......@@ -734,8 +735,13 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
}
for (i = 0; i < data->acpi_data.state_count; i++) {
u32 fid = data->acpi_data.states[i].control & FID_MASK;
u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
if (data->exttype) {
u32 fid = data->acpi_data.states[i].status & FID_MASK;
u32 vid = (data->acpi_data.states[i].status >> VID_SHIFT) & VID_MASK;
} else {
u32 fid = data->acpi_data.states[i].control & FID_MASK;
u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
}
dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
......@@ -752,7 +758,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
}
/* verify voltage is OK - BIOSs are using "off" to indicate invalid */
if (vid == 0x1f) {
if (vid == VID_OFF) {
dprintk("invalid vid %u, ignoring\n", vid);
powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
continue;
......@@ -929,15 +935,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
down(&fidvid_sem);
for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
/* make sure the sibling is initialized */
if (!powernow_data[i]) {
ret = 0;
up(&fidvid_sem);
goto err_out;
}
}
powernow_k8_acpi_pst_values(data, newstate);
if (transition_frequency(data, newstate)) {
......@@ -977,7 +974,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data;
cpumask_t oldmask = CPU_MASK_ALL;
int rc;
int rc, i;
if (!check_supported_cpu(pol->cpu))
return -ENODEV;
......@@ -1063,7 +1060,9 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
data->currfid, data->currvid);
powernow_data[pol->cpu] = data;
for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
powernow_data[i] = data;
}
return 0;
......
/*
* (c) 2003, 2004 Advanced Micro Devices, Inc.
* (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
......@@ -19,6 +19,7 @@ struct powernow_k8_data {
u32 vidmvs; /* usable value calculated from mvs */
u32 vstable; /* voltage stabilization time, units 20 us */
u32 plllock; /* pll lock time, units 1 us */
u32 exttype; /* extended interface = 1 */
/* keep track of the current fid / vid */
u32 currvid, currfid;
......@@ -41,7 +42,7 @@ struct powernow_k8_data {
#define CPUID_XFAM 0x0ff00000 /* extended family */
#define CPUID_XFAM_K8 0
#define CPUID_XMOD 0x000f0000 /* extended model */
#define CPUID_XMOD_REV_E 0x00020000
#define CPUID_XMOD_REV_F 0x00040000
#define CPUID_USE_XFAM_XMOD 0x00000f00
#define CPUID_GET_MAX_CAPABILITIES 0x80000000
#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007
......@@ -57,25 +58,26 @@ struct powernow_k8_data {
/* Field definitions within the FID VID Low Control MSR : */
#define MSR_C_LO_INIT_FID_VID 0x00010000
#define MSR_C_LO_NEW_VID 0x00001f00
#define MSR_C_LO_NEW_FID 0x0000002f
#define MSR_C_LO_NEW_VID 0x00003f00
#define MSR_C_LO_NEW_FID 0x0000003f
#define MSR_C_LO_VID_SHIFT 8
/* Field definitions within the FID VID High Control MSR : */
#define MSR_C_HI_STP_GNT_TO 0x000fffff
#define MSR_C_HI_STP_GNT_TO 0x000fffff
/* Field definitions within the FID VID Low Status MSR : */
#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */
#define MSR_S_LO_MAX_RAMP_VID 0x1f000000
#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */
#define MSR_S_LO_MAX_RAMP_VID 0x3f000000
#define MSR_S_LO_MAX_FID 0x003f0000
#define MSR_S_LO_START_FID 0x00003f00
#define MSR_S_LO_CURRENT_FID 0x0000003f
/* Field definitions within the FID VID High Status MSR : */
#define MSR_S_HI_MAX_WORKING_VID 0x001f0000
#define MSR_S_HI_START_VID 0x00001f00
#define MSR_S_HI_CURRENT_VID 0x0000001f
#define MSR_C_HI_STP_GNT_BENIGN 0x00000001
#define MSR_S_HI_MIN_WORKING_VID 0x3f000000
#define MSR_S_HI_MAX_WORKING_VID 0x003f0000
#define MSR_S_HI_START_VID 0x00003f00
#define MSR_S_HI_CURRENT_VID 0x0000003f
#define MSR_C_HI_STP_GNT_BENIGN 0x00000001
/*
* There are restrictions frequencies have to follow:
......@@ -99,13 +101,15 @@ struct powernow_k8_data {
#define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */
#define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */
#define LEAST_VID 0x1e /* Lowest (numerically highest) useful vid value */
#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */
#define MIN_FREQ 800 /* Min and max freqs, per spec */
#define MAX_FREQ 5000
#define INVALID_FID_MASK 0xffffffc1 /* not a valid fid if these bits are set */
#define INVALID_VID_MASK 0xffffffe0 /* not a valid vid if these bits are set */
#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */
#define VID_OFF 0x3f
#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
......@@ -121,12 +125,14 @@ struct powernow_k8_data {
#define IRT_SHIFT 30
#define RVO_SHIFT 28
#define EXT_TYPE_SHIFT 27
#define PLL_L_SHIFT 20
#define MVS_SHIFT 18
#define VST_SHIFT 11
#define VID_SHIFT 6
#define IRT_MASK 3
#define RVO_MASK 3
#define EXT_TYPE_MASK 1
#define PLL_L_MASK 0x7f
#define MVS_MASK 3
#define VST_MASK 0x7f
......
......@@ -1130,7 +1130,7 @@ int cpufreq_driver_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int ret;
int ret;
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
......@@ -1151,7 +1151,7 @@ EXPORT_SYMBOL_GPL(cpufreq_driver_target);
static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
{
int ret = -EINVAL;
int ret;
if (!try_module_get(policy->governor->owner))
return -EINVAL;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册