提交 32fd6901 编写于 作者: M Manuel Lauss 提交者: Ralf Baechle

MIPS: Alchemy: get rid of common/reset.c

Implement reset / poweroff in the board code instead.  The peripheral reset
code is gone too since YAMON which all in-tree boards use does the same
work when it boots.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/783/
Patchwork: http://patchwork.linux-mips.org/patch/882/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 325f8a0a
......@@ -5,8 +5,7 @@
# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
obj-y += prom.o time.o reset.o \
clocks.o platform.o power.o setup.o \
obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
sleeper.o dma.o dbdma.o
obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
......
/*
*
* BRIEF MODULE DESCRIPTION
* Au1xx0 reset routines.
*
* Copyright 2001, 2006, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/gpio.h>
#include <asm/cacheflush.h>
#include <asm/mach-au1x00/au1000.h>
void au1000_restart(char *command)
{
/* Set all integrated peripherals to disabled states */
extern void board_reset(void);
u32 prid = read_c0_prid();
printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
switch (prid & 0xFF000000) {
case 0x00000000: /* Au1000 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
asm("sync");
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb0300040); /* ir_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb0520000); /* macen0 */
au_writel(0x00, 0xb0520004); /* macen1 */
au_writel(0x00, 0xb1000008); /* i2s_enable */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1200100); /* uart1_enable */
au_writel(0x00, 0xb1300100); /* uart2_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x02, 0xb1600100); /* ssi0_enable */
au_writel(0x02, 0xb1680100); /* ssi1_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
case 0x01000000: /* Au1500 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
asm("sync");
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb1520000); /* macen0 */
au_writel(0x00, 0xb1520004); /* macen1 */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
case 0x02000000: /* Au1100 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
asm("sync");
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb0300040); /* ir_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb0520000); /* macen0 */
au_writel(0x00, 0xb1000008); /* i2s_enable */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1200100); /* uart1_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x02, 0xb1600100); /* ssi0_enable */
au_writel(0x02, 0xb1680100); /* ssi1_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
case 0x03000000: /* Au1550 */
au_writel(0x00, 0xb1a00004); /* psc 0 */
au_writel(0x00, 0xb1b00004); /* psc 1 */
au_writel(0x00, 0xb0a00004); /* psc 2 */
au_writel(0x00, 0xb0b00004); /* psc 3 */
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb1520000); /* macen0 */
au_writel(0x00, 0xb1520004); /* macen1 */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1200100); /* uart1_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
}
set_c0_status(ST0_BEV | ST0_ERL);
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
flush_cache_all();
write_c0_wired(0);
/* Give board a chance to do a hardware reset */
board_reset();
/* Jump to the beggining in case board_reset() is empty */
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
}
void au1000_halt(void)
{
#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
/* Power off system */
printk(KERN_NOTICE "\n** Powering off...\n");
au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
au_sync();
while (1); /* should not get here */
#else
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
#ifdef CONFIG_MIPS_MIRAGE
gpio_direction_output(210, 1);
#endif
#ifdef CONFIG_PM
au_sleep();
/* Should not get here */
printk(KERN_ERR "Unable to put CPU in sleep mode\n");
while (1);
#else
while (1)
__asm__(".set\tmips3\n\t"
"wait\n\t"
".set\tmips0");
#endif
#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
}
void au1000_power_off(void)
{
au1000_halt();
}
......@@ -29,18 +29,13 @@
#include <linux/ioport.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <au1000.h>
extern void __init board_setup(void);
extern void au1000_restart(char *);
extern void au1000_halt(void);
extern void au1000_power_off(void);
extern void set_cpuspec(void);
void __init plat_mem_setup(void)
......@@ -57,10 +52,6 @@ void __init plat_mem_setup(void)
/* this is faster than wasting cycles trying to approximate it */
preset_lpj = (est_freq >> 1) / HZ;
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
pm_power_off = au1000_power_off;
board_setup(); /* board specific setup */
if (au1xxx_cpu_needs_config_od())
......
......@@ -9,30 +9,15 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/pm.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/mach-db1x00/db1200.h>
#include <asm/processor.h>
#include <asm/reboot.h>
const char *get_system_type(void)
{
return "Alchemy Db1200";
}
static void board_power_off(void)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
}
void board_reset(void)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
unsigned long freq0, clksrc, div, pfc;
......@@ -73,10 +58,6 @@ void __init board_setup(void)
clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
wmb();
pm_power_off = board_power_off;
_machine_halt = board_power_off;
_machine_restart = (void(*)(char *))board_reset;
}
/* use the hexleds to count the number of times the cpu has entered
......
......@@ -30,11 +30,13 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_eth.h>
#include <asm/mach-db1x00/db1x00.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/reboot.h>
#include <prom.h>
......@@ -43,6 +45,18 @@ char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
};
static void bosporus_power_off(void)
{
printk(KERN_INFO "It's now safe to turn off power\n");
while (1)
asm volatile (".set mips3 ; wait ; .set mips0");
}
const char *get_system_type(void)
{
return "Alchemy Bosporus Gateway Reference";
}
#endif
/*
......@@ -73,6 +87,16 @@ char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
};
static void mirage_power_off(void)
{
alchemy_gpio_direction_output(210, 1);
}
const char *get_system_type(void)
{
return "Alchemy Mirage";
}
#endif
#ifdef CONFIG_MIPS_DB1550
......@@ -83,19 +107,19 @@ char irq_tab_alchemy[][5] __initdata = {
};
#endif
const char *get_system_type(void)
#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
static void mips_softreset(void)
{
#ifdef CONFIG_MIPS_BOSPORUS
return "Alchemy Bosporus Gateway Reference";
#else
return "Alchemy Db1x00";
#endif
asm volatile ("jr\t%0" : : "r"(0xbfc00000));
}
void board_reset(void)
#else
const char *get_system_type(void)
{
bcsr_write(BCSR_SYSTEM, 0);
return "Alchemy Db1x00";
}
#endif
void __init board_setup(void)
{
......@@ -196,8 +220,17 @@ void __init board_setup(void)
* be part of the audio driver.
*/
alchemy_gpio_direction_output(209, 1);
pm_power_off = mirage_power_off;
_machine_halt = mirage_power_off;
_machine_restart = (void(*)(char *))mips_softreset;
#endif
#ifdef CONFIG_MIPS_BOSPORUS
pm_power_off = bosporus_power_off;
_machine_halt = bosporus_power_off;
_machine_restart = (void(*)(char *))mips_softreset;
#endif
au_sync();
}
......
......@@ -8,6 +8,35 @@
#include <linux/mtd/physmap.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <asm/reboot.h>
#include <asm/mach-db1x00/bcsr.h>
static void db1x_power_off(void)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
}
static void db1x_reset(char *c)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, 0);
}
static int __init db1x_poweroff_setup(void)
{
if (!pm_power_off)
pm_power_off = db1x_power_off;
if (!_machine_halt)
_machine_halt = db1x_power_off;
if (!_machine_restart)
_machine_restart = db1x_reset;
return 0;
}
late_initcall(db1x_poweroff_setup);
/* register a pcmcia socket */
int __init db1x_register_pcmcia_socket(unsigned long pseudo_attr_start,
......
......@@ -31,7 +31,9 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
......@@ -50,12 +52,19 @@ char irq_tab_alchemy[][5] __initdata = {
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int mtx1_pci_idsel(unsigned int devsel, int assert);
void board_reset(void)
static void mtx1_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
}
static void mtx1_power_off(void)
{
printk(KERN_ALERT "It's now safe to remove power\n");
while (1)
asm volatile (".set mips3 ; wait ; .set mips1");
}
void __init board_setup(void)
{
#ifdef CONFIG_SERIAL_8250_CONSOLE
......@@ -98,6 +107,10 @@ void __init board_setup(void)
alchemy_gpio_direction_output(211, 1); /* green on */
alchemy_gpio_direction_output(212, 0); /* red off */
pm_power_off = mtx1_power_off;
_machine_halt = mtx1_power_off;
_machine_restart = mtx1_reset;
printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
......
......@@ -27,17 +27,26 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
void board_reset(void)
static void xxs1500_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
}
static void xxs1500_power_off(void)
{
printk(KERN_ALERT "It's now safe to remove power\n");
while (1)
asm volatile (".set mips3 ; wait ; .set mips1");
}
void __init board_setup(void)
{
u32 pin_func;
......@@ -52,6 +61,10 @@ void __init board_setup(void)
}
#endif
pm_power_off = xxs1500_power_off;
_machine_halt = xxs1500_power_off;
_machine_restart = xxs1500_reset;
alchemy_gpio1_input_enable();
alchemy_gpio2_enable();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册