提交 29633004 编写于 作者: T Takashi Iwai

ALSA: ad1889: Use standard printk helpers

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 a932be91
......@@ -77,9 +77,6 @@ MODULE_PARM_DESC(ac97_quirk, "AC'97 workaround for strange hardware.");
#define DEVNAME "ad1889"
#define PFX DEVNAME ": "
/* let's use the global sound debug interfaces */
#define ad1889_debug(fmt, arg...) snd_printd(KERN_DEBUG fmt, ## arg)
/* keep track of some hw registers */
struct ad1889_register_state {
u16 reg; /* reg setup */
......@@ -264,11 +261,11 @@ snd_ad1889_ac97_ready(struct snd_ad1889 *chip)
&& --retry)
mdelay(1);
if (!retry) {
snd_printk(KERN_ERR PFX "[%s] Link is not ready.\n",
__func__);
dev_err(chip->card->dev, "[%s] Link is not ready.\n",
__func__);
return -EIO;
}
ad1889_debug("[%s] ready after %d ms\n", __func__, 400 - retry);
dev_dbg(chip->card->dev, "[%s] ready after %d ms\n", __func__, 400 - retry);
return 0;
}
......@@ -405,9 +402,9 @@ snd_ad1889_playback_prepare(struct snd_pcm_substream *ss)
spin_unlock_irq(&chip->lock);
ad1889_debug("prepare playback: addr = 0x%x, count = %u, "
"size = %u, reg = 0x%x, rate = %u\n", chip->wave.addr,
count, size, reg, rt->rate);
dev_dbg(chip->card->dev,
"prepare playback: addr = 0x%x, count = %u, size = %u, reg = 0x%x, rate = %u\n",
chip->wave.addr, count, size, reg, rt->rate);
return 0;
}
......@@ -452,9 +449,9 @@ snd_ad1889_capture_prepare(struct snd_pcm_substream *ss)
spin_unlock_irq(&chip->lock);
ad1889_debug("prepare capture: addr = 0x%x, count = %u, "
"size = %u, reg = 0x%x, rate = %u\n", chip->ramc.addr,
count, size, reg, rt->rate);
dev_dbg(chip->card->dev,
"prepare capture: addr = 0x%x, count = %u, size = %u, reg = 0x%x, rate = %u\n",
chip->ramc.addr, count, size, reg, rt->rate);
return 0;
}
......@@ -614,7 +611,8 @@ snd_ad1889_interrupt(int irq, void *dev_id)
return IRQ_NONE;
if (st & (AD_DMA_DISR_PMAI|AD_DMA_DISR_PTAI))
ad1889_debug("Unexpected master or target abort interrupt!\n");
dev_dbg(chip->card->dev,
"Unexpected master or target abort interrupt!\n");
if ((st & AD_DMA_DISR_WAVI) && chip->psubs)
snd_pcm_period_elapsed(chip->psubs);
......@@ -656,7 +654,7 @@ snd_ad1889_pcm_init(struct snd_ad1889 *chip, int device, struct snd_pcm **rpcm)
BUFFER_BYTES_MAX);
if (err < 0) {
snd_printk(KERN_ERR PFX "buffer allocation error: %d\n", err);
dev_err(chip->card->dev, "buffer allocation error: %d\n", err);
return err;
}
......@@ -912,7 +910,7 @@ snd_ad1889_create(struct snd_card *card,
/* check PCI availability (32bit DMA) */
if (pci_set_dma_mask(pci, DMA_BIT_MASK(32)) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32)) < 0) {
printk(KERN_ERR PFX "error setting 32-bit DMA mask.\n");
dev_err(card->dev, "error setting 32-bit DMA mask.\n");
pci_disable_device(pci);
return -ENXIO;
}
......@@ -935,7 +933,7 @@ snd_ad1889_create(struct snd_card *card,
chip->bar = pci_resource_start(pci, 0);
chip->iobase = pci_ioremap_bar(pci, 0);
if (chip->iobase == NULL) {
printk(KERN_ERR PFX "unable to reserve region.\n");
dev_err(card->dev, "unable to reserve region.\n");
err = -EBUSY;
goto free_and_ret;
}
......@@ -946,7 +944,7 @@ snd_ad1889_create(struct snd_card *card,
if (request_irq(pci->irq, snd_ad1889_interrupt,
IRQF_SHARED, KBUILD_MODNAME, chip)) {
printk(KERN_ERR PFX "cannot obtain IRQ %d\n", pci->irq);
dev_err(card->dev, "cannot obtain IRQ %d\n", pci->irq);
snd_ad1889_free(chip);
return -EBUSY;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册