提交 27146c43 编写于 作者: J Joe Perches 提交者: David S. Miller

tulip/timer.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 22086a11
......@@ -28,11 +28,11 @@ void tulip_media_task(struct work_struct *work)
unsigned long flags;
if (tulip_debug > 2) {
printk(KERN_DEBUG "%s: Media selection tick, %s, status %8.8x mode"
" %8.8x SIA %8.8x %8.8x %8.8x %8.8x.\n",
dev->name, medianame[dev->if_port], ioread32(ioaddr + CSR5),
ioread32(ioaddr + CSR6), csr12, ioread32(ioaddr + CSR13),
ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
printk(KERN_DEBUG "%s: Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
dev->name, medianame[dev->if_port],
ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
csr12, ioread32(ioaddr + CSR13),
ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
}
switch (tp->chip_id) {
case DC21140:
......@@ -48,9 +48,9 @@ void tulip_media_task(struct work_struct *work)
Assume this a generic MII or SYM transceiver. */
next_tick = 60*HZ;
if (tulip_debug > 2)
printk(KERN_DEBUG "%s: network media monitor CSR6 %8.8x "
"CSR12 0x%2.2x.\n",
dev->name, ioread32(ioaddr + CSR6), csr12 & 0xff);
printk(KERN_DEBUG "%s: network media monitor CSR6 %08x CSR12 0x%02x\n",
dev->name,
ioread32(ioaddr + CSR6), csr12 & 0xff);
break;
}
mleaf = &tp->mtable->mleaf[tp->cur_index];
......@@ -62,9 +62,8 @@ void tulip_media_task(struct work_struct *work)
s8 bitnum = p[offset];
if (p[offset+1] & 0x80) {
if (tulip_debug > 1)
printk(KERN_DEBUG"%s: Transceiver monitor tick "
"CSR12=%#2.2x, no media sense.\n",
dev->name, csr12);
printk(KERN_DEBUG "%s: Transceiver monitor tick CSR12=%#02x, no media sense\n",
dev->name, csr12);
if (mleaf->type == 4) {
if (mleaf->media == 3 && (csr12 & 0x02))
goto select_next_media;
......@@ -72,16 +71,16 @@ void tulip_media_task(struct work_struct *work)
break;
}
if (tulip_debug > 2)
printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#2.2x"
" bit %d is %d, expecting %d.\n",
dev->name, csr12, (bitnum >> 1) & 7,
(csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
(bitnum >= 0));
printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
dev->name, csr12, (bitnum >> 1) & 7,
(csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
(bitnum >= 0));
/* Check that the specified bit has the proper value. */
if ((bitnum < 0) !=
((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) {
if (tulip_debug > 2)
printk(KERN_DEBUG "%s: Link beat detected for %s.\n", dev->name,
printk(KERN_DEBUG "%s: Link beat detected for %s\n",
dev->name,
medianame[mleaf->media & MEDIA_MASK]);
if ((p[2] & 0x61) == 0x01) /* Bogus Znyx board. */
goto actually_mii;
......@@ -100,9 +99,9 @@ void tulip_media_task(struct work_struct *work)
if (tulip_media_cap[dev->if_port] & MediaIsFD)
goto select_next_media; /* Skip FD entries. */
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: No link beat on media %s,"
" trying transceiver type %s.\n",
dev->name, medianame[mleaf->media & MEDIA_MASK],
printk(KERN_DEBUG "%s: No link beat on media %s, trying transceiver type %s\n",
dev->name,
medianame[mleaf->media & MEDIA_MASK],
medianame[tp->mtable->mleaf[tp->cur_index].media]);
tulip_select_media(dev, 0);
/* Restart the transmit process. */
......@@ -151,8 +150,8 @@ void mxic_timer(unsigned long data)
int next_tick = 60*HZ;
if (tulip_debug > 3) {
printk(KERN_INFO"%s: MXIC negotiation status %8.8x.\n", dev->name,
ioread32(ioaddr + CSR12));
dev_info(&dev->dev, "MXIC negotiation status %08x\n",
ioread32(ioaddr + CSR12));
}
if (next_tick) {
mod_timer(&tp->timer, RUN_AT(next_tick));
......@@ -167,11 +166,10 @@ void comet_timer(unsigned long data)
int next_tick = 60*HZ;
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: Comet link status %4.4x partner capability "
"%4.4x.\n",
dev->name,
tulip_mdio_read(dev, tp->phys[0], 1),
tulip_mdio_read(dev, tp->phys[0], 5));
printk(KERN_DEBUG "%s: Comet link status %04x partner capability %04x\n",
dev->name,
tulip_mdio_read(dev, tp->phys[0], 1),
tulip_mdio_read(dev, tp->phys[0], 5));
/* mod_timer synchronizes us with potential add_timer calls
* from interrupts.
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册