提交 169a6303 编写于 作者: L Lendacky, Thomas 提交者: David S. Miller

amd-xgbe-phy: Updates to rate change complete check

Currently, the logic will loop endlessly waiting for a rate change
to complete.  Add a counter so that if the rate change signals
never indicate complete the loop will eventually exit.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 853eb16b
......@@ -95,6 +95,8 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
#define XNP_MP_FORMATTED (1 << 13)
#define XNP_NP_EXCHANGE (1 << 15)
#define XGBE_PHY_RATECHANGE_COUNT 100
#ifndef MDIO_PMA_10GBR_PMD_CTRL
#define MDIO_PMA_10GBR_PMD_CTRL 0x0096
#endif
......@@ -193,6 +195,16 @@ do { \
(_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \
} while (0)
#define XSIR_GET_BITS(_var, _prefix, _field) \
GET_BITS((_var), \
_prefix##_##_field##_INDEX, \
_prefix##_##_field##_WIDTH)
#define XSIR_SET_BITS(_var, _prefix, _field, _val) \
SET_BITS((_var), \
_prefix##_##_field##_INDEX, \
_prefix##_##_field##_WIDTH, (_val))
/* Macros for reading or writing SerDes integration registers
* The ioread macros will get bit fields or full values using the
* register definitions formed using the input names
......@@ -387,14 +399,25 @@ static void amd_xgbe_phy_serdes_start_ratechange(struct phy_device *phydev)
static void amd_xgbe_phy_serdes_complete_ratechange(struct phy_device *phydev)
{
struct amd_xgbe_phy_priv *priv = phydev->priv;
unsigned int wait;
u16 status;
/* Release Rx and Tx ratechange */
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 0);
/* Wait for Rx and Tx ready */
while (!XSIR0_IOREAD_BITS(priv, SIR0_STATUS, RX_READY) &&
!XSIR0_IOREAD_BITS(priv, SIR0_STATUS, TX_READY))
wait = XGBE_PHY_RATECHANGE_COUNT;
while (wait--) {
usleep_range(10, 20);
status = XSIR0_IOREAD(priv, SIR0_STATUS);
if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
return;
}
netdev_err(phydev->attached_dev, "SerDes rx/tx not ready (%#hx)\n",
status);
}
static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册