提交 14f0413c 编写于 作者: H Howard Mitchell 提交者: Mark Brown

ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4

Currently GPIO4 is hardcoded to output the pll-lock signal.
Unfortunately this is after the pll-out GPIO is configured which
is selectable in the device tree. Therefore it is not possible to
use GPIO4 for pll-out. Therefore this patch removes the
configuration of GPIO4.
Signed-off-by: NHoward Mitchell <hm@hmbedded.co.uk>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 c517d838
......@@ -1156,25 +1156,6 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream,
ret, pcm512x->pll_out);
return ret;
}
gpio = PCM512x_G1OE << (4 - 1);
ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_EN,
gpio, gpio);
if (ret != 0) {
dev_err(codec->dev, "Failed to enable gpio %d: %d\n",
4, ret);
return ret;
}
gpio = PCM512x_GPIO_OUTPUT_1 + 4 - 1;
ret = regmap_update_bits(pcm512x->regmap, gpio,
PCM512x_GxSL, PCM512x_GxSL_PLLLK);
if (ret != 0) {
dev_err(codec->dev,
"Failed to output pll lock on %d: %d\n",
ret, 4);
return ret;
}
}
ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册