提交 0aa2c72e 编写于 作者: J Jack Steiner 提交者: Tony Luck

[IA64-SGI] - New SN hardware support - use_alias_space

Use local SHUB alias space when referencing MMRs that are known
to be node local. There is a slight performance benefit & code 
simplification.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
上级 3d14487b
......@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/irq.h>
......@@ -76,16 +76,14 @@ static void sn_enable_irq(unsigned int irq)
static void sn_ack_irq(unsigned int irq)
{
uint64_t event_occurred, mask = 0;
int nasid;
u64 event_occurred, mask = 0;
irq = irq & 0xff;
nasid = get_nasid();
event_occurred =
HUB_L((uint64_t *) GLOBAL_MMR_ADDR(nasid, SH_EVENT_OCCURRED));
HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
mask = event_occurred & SH_ALL_INT_MASK;
HUB_S((uint64_t *) GLOBAL_MMR_ADDR(nasid, SH_EVENT_OCCURRED_ALIAS),
mask);
HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS),
mask);
__set_bit(irq, (volatile void *)pda->sn_in_service_ivecs);
move_irq(irq);
......@@ -93,15 +91,12 @@ static void sn_ack_irq(unsigned int irq)
static void sn_end_irq(unsigned int irq)
{
int nasid;
int ivec;
uint64_t event_occurred;
u64 event_occurred;
ivec = irq & 0xff;
if (ivec == SGI_UART_VECTOR) {
nasid = get_nasid();
event_occurred = HUB_L((uint64_t *) GLOBAL_MMR_ADDR
(nasid, SH_EVENT_OCCURRED));
event_occurred = HUB_L((u64*)LOCAL_MMR_ADDR (SH_EVENT_OCCURRED));
/* If the UART bit is set here, we may have received an
* interrupt from the UART that the driver missed. To
* make sure, we IPI ourselves to force us to look again.
......
......@@ -297,7 +297,7 @@ void sn_dma_flush(uint64_t addr)
* If CE ever needs the sn_dma_flush mechanism, we will have
* to account for that here and in tioce_bus_fixup().
*/
uint32_t tio_id = REMOTE_HUB_L(nasid, TIO_NODE_ID);
uint32_t tio_id = HUB_L(TIO_IOSPACE_ADDR(nasid, TIO_NODE_ID));
uint32_t revnum = XWIDGET_PART_REV_NUM(tio_id);
/* TIOCP BRINGUP WAR (PV907516): Don't write buffer flush reg */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册