提交 02c33520 编写于 作者: T Takashi Iwai

ALSA: bt87x: Use standard printk helpers

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 4a8d9d71
......@@ -293,17 +293,23 @@ static void snd_bt87x_pci_error(struct snd_bt87x *chip, unsigned int status)
PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY;
pci_write_config_word(chip->pci, PCI_STATUS, pci_status);
if (pci_status != PCI_STATUS_DETECTED_PARITY)
snd_printk(KERN_ERR "Aieee - PCI error! status %#08x, PCI status %#04x\n",
dev_err(chip->card->dev,
"Aieee - PCI error! status %#08x, PCI status %#04x\n",
status & ERROR_INTERRUPTS, pci_status);
else {
snd_printk(KERN_ERR "Aieee - PCI parity error detected!\n");
dev_err(chip->card->dev,
"Aieee - PCI parity error detected!\n");
/* error 'handling' similar to aic7xxx_pci.c: */
chip->pci_parity_errors++;
if (chip->pci_parity_errors > 20) {
snd_printk(KERN_ERR "Too many PCI parity errors observed.\n");
snd_printk(KERN_ERR "Some device on this bus is generating bad parity.\n");
snd_printk(KERN_ERR "This is an error *observed by*, not *generated by*, this card.\n");
snd_printk(KERN_ERR "PCI parity error checking has been disabled.\n");
dev_err(chip->card->dev,
"Too many PCI parity errors observed.\n");
dev_err(chip->card->dev,
"Some device on this bus is generating bad parity.\n");
dev_err(chip->card->dev,
"This is an error *observed by*, not *generated by*, this card.\n");
dev_err(chip->card->dev,
"PCI parity error checking has been disabled.\n");
chip->interrupt_mask &= ~(INT_PPERR | INT_RIPERR);
snd_bt87x_writel(chip, REG_INT_MASK, chip->interrupt_mask);
}
......@@ -323,9 +329,11 @@ static irqreturn_t snd_bt87x_interrupt(int irq, void *dev_id)
if (irq_status & ERROR_INTERRUPTS) {
if (irq_status & (INT_FBUS | INT_FTRGT))
snd_printk(KERN_WARNING "FIFO overrun, status %#08x\n", status);
dev_warn(chip->card->dev,
"FIFO overrun, status %#08x\n", status);
if (irq_status & INT_OCERR)
snd_printk(KERN_ERR "internal RISC error, status %#08x\n", status);
dev_err(chip->card->dev,
"internal RISC error, status %#08x\n", status);
if (irq_status & (INT_PPERR | INT_RIPERR | INT_PABORT))
snd_bt87x_pci_error(chip, irq_status);
}
......@@ -747,7 +755,7 @@ static int snd_bt87x_create(struct snd_card *card,
}
chip->mmio = pci_ioremap_bar(pci, 0);
if (!chip->mmio) {
snd_printk(KERN_ERR "cannot remap io memory\n");
dev_err(card->dev, "cannot remap io memory\n");
err = -ENOMEM;
goto fail;
}
......@@ -762,7 +770,7 @@ static int snd_bt87x_create(struct snd_card *card,
err = request_irq(pci->irq, snd_bt87x_interrupt, IRQF_SHARED,
KBUILD_MODNAME, chip);
if (err < 0) {
snd_printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
dev_err(card->dev, "cannot grab irq %d\n", pci->irq);
goto fail;
}
chip->irq = pci->irq;
......@@ -850,14 +858,15 @@ static int snd_bt87x_detect_card(struct pci_dev *pci)
for (i = 0; i < ARRAY_SIZE(blacklist); ++i)
if (blacklist[i].subvendor == pci->subsystem_vendor &&
blacklist[i].subdevice == pci->subsystem_device) {
snd_printdd(KERN_INFO "card %#04x-%#04x:%#04x has no audio\n",
dev_dbg(&pci->dev,
"card %#04x-%#04x:%#04x has no audio\n",
pci->device, pci->subsystem_vendor, pci->subsystem_device);
return -EBUSY;
}
snd_printk(KERN_INFO "unknown card %#04x-%#04x:%#04x\n",
dev_info(&pci->dev, "unknown card %#04x-%#04x:%#04x\n",
pci->device, pci->subsystem_vendor, pci->subsystem_device);
snd_printk(KERN_DEBUG "please mail id, board name, and, "
dev_info(&pci->dev, "please mail id, board name, and, "
"if it works, the correct digital_rate option to "
"<alsa-devel@alsa-project.org>\n");
return SND_BT87X_BOARD_UNKNOWN;
......@@ -925,7 +934,7 @@ static int snd_bt87x_probe(struct pci_dev *pci,
if (err < 0)
goto _error;
}
snd_printk(KERN_INFO "bt87x%d: Using board %d, %sanalog, %sdigital "
dev_info(card->dev, "bt87x%d: Using board %d, %sanalog, %sdigital "
"(rate %d Hz)\n", dev, boardid,
chip->board.no_analog ? "no " : "",
chip->board.no_digital ? "no " : "", chip->board.dig_rate);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册