rt2x00link.c 11.5 KB
Newer Older
1
/*
2
	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
	<http://rt2x00.serialmonkey.com>

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the
	Free Software Foundation, Inc.,
	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 */

/*
	Module: rt2x00lib
	Abstract: rt2x00 generic link tuning routines.
 */

#include <linux/kernel.h>
#include <linux/module.h>

#include "rt2x00.h"
#include "rt2x00lib.h"

32 33 34 35 36 37
/*
 * When we lack RSSI information return something less then -80 to
 * tell the driver to tune the device to maximum sensitivity.
 */
#define DEFAULT_RSSI		-128

38 39
/*
 * Helper struct and macro to work with moving/walking averages.
40 41 42 43 44 45 46 47 48 49 50 51 52
 * When adding a value to the average value the following calculation
 * is needed:
 *
 *        avg_rssi = ((avg_rssi * 7) + rssi) / 8;
 *
 * The advantage of this approach is that we only need 1 variable
 * to store the average in (No need for a count and a total).
 * But more importantly, normal average values will over time
 * move less and less towards newly added values this results
 * that with link tuning, the device can have a very good RSSI
 * for a few minutes but when the device is moved away from the AP
 * the average will not decrease fast enough to compensate.
 * The walking average compensates this and will move towards
53 54 55 56 57 58 59
 * the new values correctly allowing a effective link tuning,
 * the speed of the average moving towards other values depends
 * on the value for the number of samples. The higher the number
 * of samples, the slower the average will move.
 * We use two variables to keep track of the average value to
 * compensate for the rounding errors. This can be a significant
 * error (>5dBm) if the factor is too low.
60
 */
61 62 63 64 65 66 67 68 69 70 71 72 73 74
#define AVG_SAMPLES	8
#define AVG_FACTOR	1000
#define MOVING_AVERAGE(__avg, __val) \
({ \
	struct avg_val __new; \
	__new.avg_weight = \
	    (__avg).avg_weight  ? \
		((((__avg).avg_weight * ((AVG_SAMPLES) - 1)) + \
		  ((__val) * (AVG_FACTOR))) / \
		 (AVG_SAMPLES) ) : \
		((__val) * (AVG_FACTOR)); \
	__new.avg = __new.avg_weight / (AVG_FACTOR); \
	__new; \
})
75

76 77 78 79
static int rt2x00link_antenna_get_link_rssi(struct rt2x00_dev *rt2x00dev)
{
	struct link_ant *ant = &rt2x00dev->link.ant;

80 81
	if (ant->rssi_ant.avg && rt2x00dev->link.qual.rx_success)
		return ant->rssi_ant.avg;
82 83 84
	return DEFAULT_RSSI;
}

85
static int rt2x00link_antenna_get_rssi_history(struct rt2x00_dev *rt2x00dev)
86 87 88
{
	struct link_ant *ant = &rt2x00dev->link.ant;

89 90
	if (ant->rssi_history)
		return ant->rssi_history;
91 92 93 94 95 96 97
	return DEFAULT_RSSI;
}

static void rt2x00link_antenna_update_rssi_history(struct rt2x00_dev *rt2x00dev,
						   int rssi)
{
	struct link_ant *ant = &rt2x00dev->link.ant;
98
	ant->rssi_history = rssi;
99 100 101 102
}

static void rt2x00link_antenna_reset(struct rt2x00_dev *rt2x00dev)
{
103 104
	rt2x00dev->link.ant.rssi_ant.avg = 0;
	rt2x00dev->link.ant.rssi_ant.avg_weight = 0;
105 106 107 108 109 110
}

static void rt2x00lib_antenna_diversity_sample(struct rt2x00_dev *rt2x00dev)
{
	struct link_ant *ant = &rt2x00dev->link.ant;
	struct antenna_setup new_ant;
111 112 113 114
	int other_antenna;

	int sample_current = rt2x00link_antenna_get_link_rssi(rt2x00dev);
	int sample_other = rt2x00link_antenna_get_rssi_history(rt2x00dev);
115 116 117 118 119 120 121 122 123 124

	memcpy(&new_ant, &ant->active, sizeof(new_ant));

	/*
	 * We are done sampling. Now we should evaluate the results.
	 */
	ant->flags &= ~ANTENNA_MODE_SAMPLE;

	/*
	 * During the last period we have sampled the RSSI
L
Luis Correia 已提交
125
	 * from both antennas. It now is time to determine
126 127
	 * which antenna demonstrated the best performance.
	 * When we are already on the antenna with the best
128 129
	 * performance, just create a good starting point
	 * for the history and we are done.
130
	 */
131 132 133
	if (sample_current >= sample_other) {
		rt2x00link_antenna_update_rssi_history(rt2x00dev,
			sample_current);
134
		return;
135 136 137
	}

	other_antenna = (ant->active.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A;
138 139

	if (ant->flags & ANTENNA_RX_DIVERSITY)
140
		new_ant.rx = other_antenna;
141 142

	if (ant->flags & ANTENNA_TX_DIVERSITY)
143
		new_ant.tx = other_antenna;
144

145
	rt2x00lib_config_antenna(rt2x00dev, new_ant);
146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161
}

static void rt2x00lib_antenna_diversity_eval(struct rt2x00_dev *rt2x00dev)
{
	struct link_ant *ant = &rt2x00dev->link.ant;
	struct antenna_setup new_ant;
	int rssi_curr;
	int rssi_old;

	memcpy(&new_ant, &ant->active, sizeof(new_ant));

	/*
	 * Get current RSSI value along with the historical value,
	 * after that update the history with the current value.
	 */
	rssi_curr = rt2x00link_antenna_get_link_rssi(rt2x00dev);
162 163
	rssi_old = rt2x00link_antenna_get_rssi_history(rt2x00dev);
	rt2x00link_antenna_update_rssi_history(rt2x00dev, rssi_curr);
164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184

	/*
	 * Legacy driver indicates that we should swap antenna's
	 * when the difference in RSSI is greater that 5. This
	 * also should be done when the RSSI was actually better
	 * then the previous sample.
	 * When the difference exceeds the threshold we should
	 * sample the rssi from the other antenna to make a valid
	 * comparison between the 2 antennas.
	 */
	if (abs(rssi_curr - rssi_old) < 5)
		return;

	ant->flags |= ANTENNA_MODE_SAMPLE;

	if (ant->flags & ANTENNA_RX_DIVERSITY)
		new_ant.rx = (new_ant.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A;

	if (ant->flags & ANTENNA_TX_DIVERSITY)
		new_ant.tx = (new_ant.tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A;

185
	rt2x00lib_config_antenna(rt2x00dev, new_ant);
186 187
}

188
static bool rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev)
189 190
{
	struct link_ant *ant = &rt2x00dev->link.ant;
191
	unsigned int flags = ant->flags;
192 193 194 195 196 197 198

	/*
	 * Determine if software diversity is enabled for
	 * either the TX or RX antenna (or both).
	 * Always perform this check since within the link
	 * tuner interval the configuration might have changed.
	 */
199 200
	flags &= ~ANTENNA_RX_DIVERSITY;
	flags &= ~ANTENNA_TX_DIVERSITY;
201 202

	if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
203
		flags |= ANTENNA_RX_DIVERSITY;
204
	if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
205
		flags |= ANTENNA_TX_DIVERSITY;
206 207 208 209

	if (!(ant->flags & ANTENNA_RX_DIVERSITY) &&
	    !(ant->flags & ANTENNA_TX_DIVERSITY)) {
		ant->flags = 0;
210
		return true;
211 212
	}

213 214 215
	/* Update flags */
	ant->flags = flags;

216 217 218 219 220 221
	/*
	 * If we have only sampled the data over the last period
	 * we should now harvest the data. Otherwise just evaluate
	 * the data. The latter should only be performed once
	 * every 2 seconds.
	 */
222
	if (ant->flags & ANTENNA_MODE_SAMPLE) {
223
		rt2x00lib_antenna_diversity_sample(rt2x00dev);
224 225
		return true;
	} else if (rt2x00dev->link.count & 1) {
226
		rt2x00lib_antenna_diversity_eval(rt2x00dev);
227 228 229 230
		return true;
	}

	return false;
231 232 233 234 235 236
}

void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev,
			     struct sk_buff *skb,
			     struct rxdone_entry_desc *rxdesc)
{
237
	struct link *link = &rt2x00dev->link;
238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259
	struct link_qual *qual = &rt2x00dev->link.qual;
	struct link_ant *ant = &rt2x00dev->link.ant;
	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;

	/*
	 * Frame was received successfully since non-succesfull
	 * frames would have been dropped by the hardware.
	 */
	qual->rx_success++;

	/*
	 * We are only interested in quality statistics from
	 * beacons which came from the BSS which we are
	 * associated with.
	 */
	if (!ieee80211_is_beacon(hdr->frame_control) ||
	    !(rxdesc->dev_flags & RXDONE_MY_BSS))
		return;

	/*
	 * Update global RSSI
	 */
260
	link->avg_rssi = MOVING_AVERAGE(link->avg_rssi, rxdesc->rssi);
261 262 263 264

	/*
	 * Update antenna RSSI
	 */
265
	ant->rssi_ant = MOVING_AVERAGE(ant->rssi_ant, rxdesc->rssi);
266 267 268 269
}

void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev)
{
270
	struct link *link = &rt2x00dev->link;
271 272 273

	/*
	 * Link tuning should only be performed when
274 275 276
	 * an active sta interface exists. AP interfaces
	 * don't need link tuning and monitor mode interfaces
	 * should never have to work with link tuners.
277
	 */
278
	if (!rt2x00dev->intf_sta_count)
279 280
		return;

281 282 283 284 285 286 287 288 289
	/**
	 * While scanning, link tuning is disabled. By default
	 * the most sensitive settings will be used to make sure
	 * that all beacons and probe responses will be recieved
	 * during the scan.
	 */
	if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
		return;

290 291
	rt2x00link_reset_tuner(rt2x00dev, false);

292 293 294
	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
		ieee80211_queue_delayed_work(rt2x00dev->hw,
					     &link->work, LINK_TUNE_INTERVAL);
295 296 297 298 299 300 301 302 303
}

void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev)
{
	cancel_delayed_work_sync(&rt2x00dev->link.work);
}

void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna)
{
304 305
	struct link_qual *qual = &rt2x00dev->link.qual;

306 307 308 309 310 311 312 313 314 315 316 317
	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
		return;

	/*
	 * Reset link information.
	 * Both the currently active vgc level as well as
	 * the link tuner counter should be reset. Resetting
	 * the counter is important for devices where the
	 * device should only perform link tuning during the
	 * first minute after being enabled.
	 */
	rt2x00dev->link.count = 0;
318
	memset(qual, 0, sizeof(*qual));
319 320 321 322

	/*
	 * Reset the link tuner.
	 */
323
	rt2x00dev->ops->lib->reset_tuner(rt2x00dev, qual);
324 325 326 327 328

	if (antenna)
		rt2x00link_antenna_reset(rt2x00dev);
}

I
Ivo van Doorn 已提交
329
static void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
I
Ivo van Doorn 已提交
330 331 332 333 334 335 336 337 338
{
	struct link_qual *qual = &rt2x00dev->link.qual;

	qual->rx_success = 0;
	qual->rx_failed = 0;
	qual->tx_success = 0;
	qual->tx_failed = 0;
}

339 340 341 342
static void rt2x00link_tuner(struct work_struct *work)
{
	struct rt2x00_dev *rt2x00dev =
	    container_of(work, struct rt2x00_dev, link.work.work);
343
	struct link *link = &rt2x00dev->link;
344 345 346 347 348 349
	struct link_qual *qual = &rt2x00dev->link.qual;

	/*
	 * When the radio is shutting down we should
	 * immediately cease all link tuning.
	 */
350 351
	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
	    test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
352 353 354 355 356 357 358 359
		return;

	/*
	 * Update statistics.
	 */
	rt2x00dev->ops->lib->link_stats(rt2x00dev, qual);
	rt2x00dev->low_level_stats.dot11FCSErrorCount += qual->rx_failed;

360 361 362 363 364 365
	/*
	 * Update quality RSSI for link tuning,
	 * when we have received some frames and we managed to
	 * collect the RSSI data we could use this. Otherwise we
	 * must fallback to the default RSSI value.
	 */
366
	if (!link->avg_rssi.avg || !qual->rx_success)
367 368
		qual->rssi = DEFAULT_RSSI;
	else
369
		qual->rssi = link->avg_rssi.avg;
370

371
	/*
372 373 374
	 * Check if link tuning is supported by the hardware, some hardware
	 * do not support link tuning at all, while other devices can disable
	 * the feature from the EEPROM.
375
	 */
376
	if (test_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags))
377
		rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count);
378 379 380 381

	/*
	 * Send a signal to the led to update the led signal strength.
	 */
382
	rt2x00leds_led_quality(rt2x00dev, qual->rssi);
383 384

	/*
385 386 387
	 * Evaluate antenna setup, make this the last step when
	 * rt2x00lib_antenna_diversity made changes the quality
	 * statistics will be reset.
I
Ivo van Doorn 已提交
388
	 */
389 390
	if (rt2x00lib_antenna_diversity(rt2x00dev))
		rt2x00link_reset_qual(rt2x00dev);
I
Ivo van Doorn 已提交
391

392 393 394
	/*
	 * Increase tuner counter, and reschedule the next link tuner run.
	 */
395
	link->count++;
396 397 398 399

	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
		ieee80211_queue_delayed_work(rt2x00dev->hw,
					     &link->work, LINK_TUNE_INTERVAL);
400 401 402 403 404 405
}

void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
{
	INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner);
}