param.c 10.0 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
/*******************************************************************************

  Intel PRO/1000 Linux driver
  Copyright(c) 1999 - 2007 Intel Corporation.

  This program is free software; you can redistribute it and/or modify it
  under the terms and conditions of the GNU General Public License,
  version 2, as published by the Free Software Foundation.

  This program is distributed in the hope it will be useful, but WITHOUT
  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  more details.

  You should have received a copy of the GNU General Public License along with
  this program; if not, write to the Free Software Foundation, Inc.,
  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.

  The full GNU General Public License is included in this distribution in
  the file called "COPYING".

  Contact Information:
  Linux NICS <linux.nics@intel.com>
  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

*******************************************************************************/

#include <linux/netdevice.h>

#include "e1000.h"

/* This is the only thing that needs to be changed to adjust the
 * maximum number of ports that the driver can manage.
 */

#define E1000_MAX_NIC 32

#define OPTION_UNSET   -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED  1

#define COPYBREAK_DEFAULT 256
unsigned int copybreak = COPYBREAK_DEFAULT;
module_param(copybreak, uint, 0644);
MODULE_PARM_DESC(copybreak,
	"Maximum size of packet that is copied to a new buffer on receive");

/* All parameters are treated the same, as an integer array of values.
 * This macro just reduces the need to repeat the same declaration code
 * over and over (plus this helps to avoid typo bugs).
 */

#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
S
Stephen Hemminger 已提交
55 56 57 58 59
#define E1000_PARAM(X, desc)					\
	static int __devinitdata X[E1000_MAX_NIC+1]		\
		= E1000_PARAM_INIT;				\
	static unsigned int num_##X;				\
	module_param_array_named(X, X, int, &num_##X, 0);	\
60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127
	MODULE_PARM_DESC(X, desc);


/* Transmit Interrupt Delay in units of 1.024 microseconds
 *  Tx interrupt delay needs to typically be set to something non zero
 *
 * Valid Range: 0-65535
 */
E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
#define DEFAULT_TIDV 8
#define MAX_TXDELAY 0xFFFF
#define MIN_TXDELAY 0

/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
 *
 * Valid Range: 0-65535
 */
E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
#define DEFAULT_TADV 32
#define MAX_TXABSDELAY 0xFFFF
#define MIN_TXABSDELAY 0

/* Receive Interrupt Delay in units of 1.024 microseconds
 *   hardware will likely hang if you set this to anything but zero.
 *
 * Valid Range: 0-65535
 */
E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
#define DEFAULT_RDTR 0
#define MAX_RXDELAY 0xFFFF
#define MIN_RXDELAY 0

/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
 *
 * Valid Range: 0-65535
 */
E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
#define DEFAULT_RADV 8
#define MAX_RXABSDELAY 0xFFFF
#define MIN_RXABSDELAY 0

/* Interrupt Throttle Rate (interrupts/sec)
 *
 * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
 */
E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
#define DEFAULT_ITR 3
#define MAX_ITR 100000
#define MIN_ITR 100

/* Enable Smart Power Down of the PHY
 *
 * Valid Range: 0, 1
 *
 * Default Value: 0 (disabled)
 */
E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");

/* Enable Kumeran Lock Loss workaround
 *
 * Valid Range: 0, 1
 *
 * Default Value: 1 (enabled)
 */
E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");

struct e1000_option {
	enum { enable_option, range_option, list_option } type;
S
Stephen Hemminger 已提交
128 129 130
	const char *name;
	const char *err;
	int def;
131 132 133 134 135 136 137 138 139 140 141 142
	union {
		struct { /* range_option info */
			int min;
			int max;
		} r;
		struct { /* list_option info */
			int nr;
			struct e1000_opt_list { int i; char *str; } *p;
		} l;
	} arg;
};

S
Stephen Hemminger 已提交
143 144
static int __devinit e1000_validate_option(unsigned int *value,
					   const struct e1000_option *opt,
145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216
					   struct e1000_adapter *adapter)
{
	if (*value == OPTION_UNSET) {
		*value = opt->def;
		return 0;
	}

	switch (opt->type) {
	case enable_option:
		switch (*value) {
		case OPTION_ENABLED:
			ndev_info(adapter->netdev, "%s Enabled\n", opt->name);
			return 0;
		case OPTION_DISABLED:
			ndev_info(adapter->netdev, "%s Disabled\n", opt->name);
			return 0;
		}
		break;
	case range_option:
		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
			ndev_info(adapter->netdev,
					"%s set to %i\n", opt->name, *value);
			return 0;
		}
		break;
	case list_option: {
		int i;
		struct e1000_opt_list *ent;

		for (i = 0; i < opt->arg.l.nr; i++) {
			ent = &opt->arg.l.p[i];
			if (*value == ent->i) {
				if (ent->str[0] != '\0')
					ndev_info(adapter->netdev, "%s\n",
						  ent->str);
				return 0;
			}
		}
	}
		break;
	default:
		BUG();
	}

	ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n",
	       opt->name, *value, opt->err);
	*value = opt->def;
	return -1;
}

/**
 * e1000e_check_options - Range Checking for Command Line Parameters
 * @adapter: board private structure
 *
 * This routine checks all command line parameters for valid user
 * input.  If an invalid value is given, or if no user specified
 * value exists, a default value is used.  The final value is stored
 * in a variable in the adapter structure.
 **/
void __devinit e1000e_check_options(struct e1000_adapter *adapter)
{
	struct e1000_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;
	int bd = adapter->bd_number;

	if (bd >= E1000_MAX_NIC) {
		ndev_notice(netdev,
		       "Warning: no configuration for board #%i\n", bd);
		ndev_notice(netdev, "Using defaults for all values\n");
	}

	{ /* Transmit Interrupt Delay */
S
Stephen Hemminger 已提交
217
		const struct e1000_option opt = {
218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235
			.type = range_option,
			.name = "Transmit Interrupt Delay",
			.err  = "using default of "
				__MODULE_STRING(DEFAULT_TIDV),
			.def  = DEFAULT_TIDV,
			.arg  = { .r = { .min = MIN_TXDELAY,
					 .max = MAX_TXDELAY } }
		};

		if (num_TxIntDelay > bd) {
			adapter->tx_int_delay = TxIntDelay[bd];
			e1000_validate_option(&adapter->tx_int_delay, &opt,
					      adapter);
		} else {
			adapter->tx_int_delay = opt.def;
		}
	}
	{ /* Transmit Absolute Interrupt Delay */
S
Stephen Hemminger 已提交
236
		const struct e1000_option opt = {
237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273
			.type = range_option,
			.name = "Transmit Absolute Interrupt Delay",
			.err  = "using default of "
				__MODULE_STRING(DEFAULT_TADV),
			.def  = DEFAULT_TADV,
			.arg  = { .r = { .min = MIN_TXABSDELAY,
					 .max = MAX_TXABSDELAY } }
		};

		if (num_TxAbsIntDelay > bd) {
			adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
			e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
					      adapter);
		} else {
			adapter->tx_abs_int_delay = opt.def;
		}
	}
	{ /* Receive Interrupt Delay */
		struct e1000_option opt = {
			.type = range_option,
			.name = "Receive Interrupt Delay",
			.err  = "using default of "
				__MODULE_STRING(DEFAULT_RDTR),
			.def  = DEFAULT_RDTR,
			.arg  = { .r = { .min = MIN_RXDELAY,
					 .max = MAX_RXDELAY } }
		};

		if (num_RxIntDelay > bd) {
			adapter->rx_int_delay = RxIntDelay[bd];
			e1000_validate_option(&adapter->rx_int_delay, &opt,
					      adapter);
		} else {
			adapter->rx_int_delay = opt.def;
		}
	}
	{ /* Receive Absolute Interrupt Delay */
S
Stephen Hemminger 已提交
274
		const struct e1000_option opt = {
275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292
			.type = range_option,
			.name = "Receive Absolute Interrupt Delay",
			.err  = "using default of "
				__MODULE_STRING(DEFAULT_RADV),
			.def  = DEFAULT_RADV,
			.arg  = { .r = { .min = MIN_RXABSDELAY,
					 .max = MAX_RXABSDELAY } }
		};

		if (num_RxAbsIntDelay > bd) {
			adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
			e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
					      adapter);
		} else {
			adapter->rx_abs_int_delay = opt.def;
		}
	}
	{ /* Interrupt Throttling Rate */
S
Stephen Hemminger 已提交
293
		const struct e1000_option opt = {
294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340
			.type = range_option,
			.name = "Interrupt Throttling Rate (ints/sec)",
			.err  = "using default of "
				__MODULE_STRING(DEFAULT_ITR),
			.def  = DEFAULT_ITR,
			.arg  = { .r = { .min = MIN_ITR,
					 .max = MAX_ITR } }
		};

		if (num_InterruptThrottleRate > bd) {
			adapter->itr = InterruptThrottleRate[bd];
			switch (adapter->itr) {
			case 0:
				ndev_info(netdev, "%s turned off\n",
					opt.name);
				break;
			case 1:
				ndev_info(netdev,
					  "%s set to dynamic mode\n",
					  opt.name);
				adapter->itr_setting = adapter->itr;
				adapter->itr = 20000;
				break;
			case 3:
				ndev_info(netdev,
					"%s set to dynamic conservative mode\n",
					opt.name);
				adapter->itr_setting = adapter->itr;
				adapter->itr = 20000;
				break;
			default:
				e1000_validate_option(&adapter->itr, &opt,
					adapter);
				/*
				 * save the setting, because the dynamic bits
				 * change itr. clear the lower two bits
				 * because they are used as control
				 */
				adapter->itr_setting = adapter->itr & ~3;
				break;
			}
		} else {
			adapter->itr_setting = opt.def;
			adapter->itr = 20000;
		}
	}
	{ /* Smart Power Down */
S
Stephen Hemminger 已提交
341
		const struct e1000_option opt = {
342 343 344 345 346 347 348
			.type = enable_option,
			.name = "PHY Smart Power Down",
			.err  = "defaulting to Disabled",
			.def  = OPTION_DISABLED
		};

		if (num_SmartPowerDownEnable > bd) {
S
Stephen Hemminger 已提交
349
			unsigned int spd = SmartPowerDownEnable[bd];
350 351 352 353 354 355 356
			e1000_validate_option(&spd, &opt, adapter);
			if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN)
			    && spd)
				adapter->flags |= FLAG_SMART_POWER_DOWN;
		}
	}
	{ /* Kumeran Lock Loss Workaround */
S
Stephen Hemminger 已提交
357
		const struct e1000_option opt = {
358 359 360 361 362 363 364
			.type = enable_option,
			.name = "Kumeran Lock Loss Workaround",
			.err  = "defaulting to Enabled",
			.def  = OPTION_ENABLED
		};

		if (num_KumeranLockLoss > bd) {
S
Stephen Hemminger 已提交
365
			unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
366 367 368 369 370 371 372 373 374 375 376
			e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
			if (hw->mac.type == e1000_ich8lan)
				e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
								kmrn_lock_loss);
		} else {
			if (hw->mac.type == e1000_ich8lan)
				e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
								       opt.def);
		}
	}
}