- 15 3月, 2018 2 次提交
-
-
由 Matt Caswell 提交于
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per feedback. Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5520)
-
- 13 2月, 2018 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 01 2月, 2018 1 次提交
-
-
由 Richard Levitte 提交于
Everything in apps includes apps.h, because that one declares apps internal library routines. However, progs.h doesn't declare library routines, but rather the main commands and their options, and there's no reason why the library modules should include it. So, remove the inclusion of progs.h from apps.h and add that inclusion in all command source files. Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5222)
-
- 18 10月, 2017 1 次提交
-
-
由 KaoruToda 提交于
Since return is inconsistent, I removed unnecessary parentheses and unified them. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4541)
-
- 17 7月, 2017 2 次提交
-
-
由 Pauli 提交于
Introduced by #3862 Reviewed-by: NTim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3944)
-
由 Rich Salz 提交于
Standardized the -rand flag and added a new one: -rand file... Always reads the specified files -writerand file Always writes to the file on exit For apps that use a config file, the RANDFILE config parameter reads the file at startup (to seed the RNG) and write to it on exit if the -writerand flag isn't used. Ensured that every app that took -rand also took -writerand, and made sure all of that agreed with all the documentation. Fix error reporting in write_file and -rand Reviewed-by: NPaul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3862)
-
- 13 6月, 2017 1 次提交
-
-
由 Paul Yang 提交于
Mostly braces and NULL pointer check and also copyright year bump Signed-off-by: NPaul Yang <paulyang.inf@gmail.com> Reviewed-by: NKurt Roeckx <kurt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3657)
-
- 19 10月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
In apps/apps.c, one can set up an engine with setup_engine(). However, we freed the structural reference immediately, which means that for engines that don't already have a structural reference somewhere else (because it's a built in engine), we end up returning an invalid reference. Instead, the function release_engine() is added, and called at the end of the routines that call setup_engine(). Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1643)
-
- 15 10月, 2016 1 次提交
-
-
由 FdaSilvaYY 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1694)
-
- 21 9月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Check arg count and print an error message. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 18 5月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 23 2月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 08 2月, 2016 2 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Rich Salz 提交于
dgst: using digest instead of specific digest commands the digest list specified in man dgst may be inaccurate, hence using digest and referring to the list in digest-commands 'sha' as a digest name is no longer supported dgst,pkeyutl cmds help cleanup - In dgst, pkeyutl cmds, some options help was missing. - fixed a minor typo in openssl.pod, that fixes make install. - digest-commands was showing ‘sha’, which is not a supported digest anymore. Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 06 2月, 2016 1 次提交
-
-
由 FdaSilvaYY 提交于
Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 07 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
- 12 12月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 13 10月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Loading the config file after processing command line options can cause problems, e.g. where an engine provides new ciphers/digests these are not then recoginised on the command line. Move the default config file loading to before the command line option processing. Whilst we're doing this we might as well centralise this instead of doing it individually for each application. Finally if we do it before the OpenSSL_add_ssl_algorithms() call then ciphersuites provided by an engine (e.g. GOST) can be available to the apps. RT#4085 RT#4086 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 12 10月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
There used to be options -macopt and -sigopt in <=1.0.2 for the dgst command line app. These were incorrectly spelled as -macop and -sigop in master. RT#4072 Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 06 9月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
The different apps had the liberty to decide whether they would open their input and output files in binary mode or not, which could be confusing if two different apps were handling the same type of file in different ways. The solution is to centralise the decision of low level file organisation, and that the apps would use a selection of formats to state the intent of the file. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 03 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Here are the "rules" for handling flags that depend on #ifdef: - Do not ifdef the enum. Only ifdef the OPTIONS table. All ifdef'd entries appear at the end; by convention "engine" is last. This ensures that at run-time, the flag will never be recognized/allowed. The next two bullets entries are for silencing compiler warnings: - In the while/switch parsing statement, use #ifdef for the body to disable it; leave the "case OPT_xxx:" and "break" statements outside the ifdef/ifndef. See ciphers.c for example. - If there are multiple options controlled by a single guard, OPT_FOO, OPT_BAR, etc., put a an #ifdef around the set, and then do "#else" and a series of case labels and a break. See OPENSSL_NO_AES in cms.c for example. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 29 5月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
The module loading feature got broken a while ago, so restore it, but have it a bit more explicit this time around. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 02 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
After the finale, the "real" final part. :) Do a recursive grep with "-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are an "if NULL" check that can be removed. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 01 5月, 2015 3 次提交
-
-
由 Rich Salz 提交于
Don't check for NULL before calling OPENSSL_free Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
Add OPENSSL_clear_free which merges cleanse and free. (Names was picked to be similar to BN_clear_free, etc.) Removed OPENSSL_freeFunc macro. Fixed the small simple ones that are left: CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
No point in proceeding if you're out of memory. So change *all* OPENSSL_malloc calls in apps to use the new routine which prints a message and exits. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 29 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Following ANSI C rules, remove the casts from calls to OPENSSL_malloc and OPENSSL_realloc. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 26 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Make setup_engine be a dummy if NO_ENGINE is enabled. The option is not enabled if NO_ENGINE is enabled, so the one "wasted" variable just sits there. Removes some variables and code. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 25 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb246 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 28 3月, 2015 1 次提交
-
-
由 Rich Salz 提交于
EVP_.*free; this gets: EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 25 3月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free BIO_free BIO_free_all BIO_vfree Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 17 3月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Move memory allocation failure checks closer to the site of the malloc in dgst app. Only a problem if the debug flag is set...but still should be fixed. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 05 3月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error paths as I spotted them along the way. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 22 1月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 30 12月, 2014 1 次提交
-
-
由 Thorsten Glaser 提交于
Signed-off-by: NKurt Roeckx <kurt@roeckx.be> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 30 6月, 2014 1 次提交
-
-
由 Dr. Stephen Henson 提交于
We can't unfortunately print the CMAC cipher used without extending the API. PR#2579
-
- 11 2月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 07 4月, 2011 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 05 3月, 2010 1 次提交
-
-
由 Dr. Stephen Henson 提交于
an algorithm from the supplied engine instead of just the default one.
-